• 한국재료학회지
• /
• 제33권12호
• /
• pp.511-516
• /
• 2023

Amorphous In-Ga-Zn-O (a-IGZO) thin film transistors (TFTs) with a coplanar structure were fabricated to investigate the feasibility of their potential application in large size organic light emitting diodes (OLEDs). Drain currents, used as functions of the gate voltages for the TFTs, showed the output currents had slight differences in the saturation region, just as the output currents of the etch stopper TFTs did. The maximum difference in the threshold voltages of the In-Ga-Zn-O (a-IGZO) TFTs was as small as approximately 0.57 V. After the application of a positive bias voltage stress for 50,000 s, the values of the threshold voltage of the coplanar structure TFTs were only slightly shifted, by 0.18 V, indicative of their stability. The coplanar structure TFTs were embedded in OLEDs and exhibited a maximum luminance as large as 500 nits, and their color gamut satisfied 99 % of the digital cinema initiatives, confirming their suitability for large size and high resolution OLEDs. Further, the image density of large-size OLEDs embedded with the coplanar structure TFTs was significantly enhanced compared with OLEDs embedded with conventional TFTs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.678-681
• /
• 2002

In this paper, Characterization for several 3-D embedded passive elements with different structures was performed. The equivalent circuit optimization for embedded inductor was performed by HSPICE simulation software. After extracting each parameter values, the difference of parameter from each structure was examined. From this work, effective characterization of passive devices with similar structure will be possible.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.295-299
• /
• 1996

Intrinsic Fabry-Perot Optical fiber sensors were embedded to tensile side of the 20cm$\times$20cm$\times$150cm cement concrete structures. The sensors were attached to the reinforcing steels and then, the cement concretes were applied. It took 30 days for curing the specimens. After that, the specimens were tested with 4-point bending method by universal testing machine. Strains were measured and recorded by the strain gauges embedded near optical fiber sensors. Output data of fiber sensor showed good linearity to the strain data from the strain gauges up 2000microstrain. The optical fiber sensors showed good response after yielding of structure while embedded metal film strain gauges did not show any response. We also specimens were broken down. In conclusion, the optical fiber sensors can be used as elements of health monitoring systems for cement concrete infra-structures.

• 대한임베디드공학회논문지
• /
• 제7권6호
• /
• pp.331-338
• /
• 2012

This paper presents a wireless sensor network protocol aimed for artificial structure monitoring. The proposed protocol enables the sensor network to operate at a low duty cycle for reducing power consumption with a high degree of synchronization accuracy. It also enables event-triggered measurement of environmental information with a high sampling rate and the transmission of the measured data with a low latency. The feasibility of the proposed protocol is demonstrated through experiments involving three sensor nodes and a sink node. Though a tunnel health monitoring was considered in the paper, the proposed protocol can be easily adopted in other areas.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.263-268
• /
• 1997

One of the principal causes of the deterioation of coastal concrete structures is the corrosion of reinforcing steel induced by the attack of chloride ions. An experimental study was performed to investigate the distribution of concentration of chloride ions in a coastal concrete structure and to measure the half-cell potential of embedded steel by using the copper-copper sulfate reference electrode. Quantitative analysis showed that the concentration of chloride ion in the aqueous phase near the surface of embedded steel exceeded a threshold value for corrosion, 0.05% by weight in concrete. The absolute value of half-cell potential at some members of embedded steel was measured to be higher than 350mV, indicating that the probability of corrosion is more than 90%. The prediction on corrosion based on the experimental measurements was confirmed by the observation of corrosion on the surface of steel bars in the concrete core taken out of the concrete structure.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.306-309
• /
• 2006

The fully embedded composite truss beam is developed based on composite member, truss system before composite and beam system after composite. The proper design concept and method of the fully embedded composite truss beam are discussed. A bending test on the fully embedded composite truss beam with span length 25.0m is carried out to investigate the flexural behavior and ultimate strength of the developed structure up to failure. A good agreement between the measured and predicted results are observed.

• 전자공학회논문지CI
• /
• 제44권1호
• /
• pp.1-9
• /
• 2007

임베디드 프로세서는 총 에너지소모량 가운데 대략 40% 이상을 캐시에서 소모하고 있으므로 에너지-효율적 고성능 데이터 캐시 구조를 필요로 한다. 본 논문에서는 임베디드 프로세서를 위한 저전력 선인출 데이터캐시 구조를 제안하였다. 제안한 데이터캐시 구조는 선인출장치(prefetching unit)를 포함한 기존 데이터캐시 구조에 태그히스토리 테이블(tag history table)을 구비함으로써 요구인출 및 선인출시 발생하는 태그메모리 병렬탐색 횟수를 감소시켰다. 이와 같은 전략적인 캐시 구조는 적은 하드웨어 비용으로 병렬탐색을 위한 전력소모를 현저히 줄일 수 있다. 실험을 통하여 제안한 데이터캐시 구조가 기존 선인출 데이터캐시 구조와 동일한 성능을 유지하면서 낮은 전력을 요구함을 확인하였다.

• 한국산학기술학회논문지
• /
• 제12권10호
• /
• pp.4574-4577
• /
• 2011

본 논문에서는 USN(Ubiquitous Sensor Network)에서 사용되는 홈네트워크의 구조를 분석하고, 가정 자동화를 위한 임베디드 시스템을 안드로이드 OS상에서 구현하였다. 개발된 시스템은 홈 네트워크 구축을 위해 무선통신을 이용하므로 설치의 어려움을 최소화 할 수 있는 장점이 있으며, 집을 구성하는 전자적인 컴포넌트에 따라 미리 정의해 놓은 아이디 기반으로 가정 자동화시스템을 구축하였다. 또한, 가정 자동화에 적합한 데이터 구조를 정의하고 패킷의 구조에 따라 안드로이드 OS기반의 응용프로그램을 개발하여 가정 자동화를 위한 임베디드 시스템을 개발하였다.

• 한국군사과학기술학회지
• /
• 제4권2호
• /
• pp.122-129
• /
• 2001

A characterization procedure for analyzing symmetric coupled MIS(Metal-Insulator-Semiconductor) transmission line is used the same procedure as a general single layer symmetric coupled line with perfect dielectric substrate from the extraction of the characteristic impedance and propagation constant for even- and odd-mode. In this paper, an analysis for a new substrate shielding symmetric coupled MIS structure consisting of grounded crossbar at the interface between Si and SiO2 layer using the Finite- Difference Time-Domain(FDTD) method is presented. In order to reduce the substrate effects on the transmission line characteristics, a shielding structure consisting of grounded crossbar lines over time-domain signal has been examined. Symmetric coupled MIS transmission line parameters for even- and odd-mode are investigated as the functions of frequency, and the extracted distributed frequency- dependent transmission line parameters and corresponding equivalent circuit parameters as well as quality factor for the new MIS crossbar embedded structure are also presented. It is shown that the quality factor of the symmetric coupled transmission line can be improved without significant change in the characteristic impedance and effective dielectric constant.

• ETRI Journal
• /
• 제28권3호
• /
• pp.337-346
• /
• 2006

In this paper, we propose a new language model, namely, a dependency structure language model, for information retrieval to compensate for the weaknesses of unigram and bigram language models. The dependency structure language model is based on the first-order dependency model and the dependency parse tree generated by a linguistic parser. So, long-distance dependencies can be naturally captured by the dependency structure language model. We carried out extensive experiments to verify the proposed model, where the dependency structure model gives a better performance than recently proposed language models and the Okapi BM25 method, and the dependency structure is more effective than unigram and bigram in language modeling for information retrieval.