• Journal of Sensor Science and Technology
• /
• v.33 no.1
• /
• pp.56-61
• /
• 2024

The quality of the display can be managed by effectively managing the temperature generated by the panel during use. Conventional display panels rely on an external reference resistor for temperature monitoring. However, this approach is easily affected by external factors such as temperature variations from the driving circuit and chips. These variations reduce reliability, causing complicated mounting owing to the external chip, and cannot monitor the individual pixel temperatures. However, this issue can be simply and efficiently addressed by integrating temperature sensors during the display panel manufacturing process. In this study, we fabricated and analyzed a temperature sensor integrated into an a-IGZO (amorphous indium-gallium-zinc-oxide) TFT array that was to precisely monitor temperature and prevent the deterioration of OLED display pixels. The temperature sensor was positioned on top of the oxide TFT. Simultaneously, it worked as a light shield layer, contributing to the reliability of the oxide. The characteristics of the array with integrated temperature sensors were measured and analyzed while adjusting the temperature in real-time. By integrating a temperature sensor into the TFT array, monitoring the temperature of the display became easier and more accurate. This study could contribute to managing the lifetime of the display.

• Journal of Korea Multimedia Society
• /
• v.15 no.1
• /
• pp.32-39
• /
• 2012

In this paper, the implementation of location based services (LBS) using S-DMB (satellite-digital multimedia broadcasting) system was proposed. In S-DMB System, the frequency of transmitted signal is about 2 GHz which has a characteristics of strong straightness but weak diffraction so that there are many shade areas such as indoors and underground spaces. Therefore the signal transmitted from the satellite should be retransmitted by the earth repeaters called as gap filler. Because each gap filler has its own identification value, the gap filler ID introduces the area in which the gap filler was installed. Generally, the 51st data symbols of S-DMB pilot signal transmitted from the satellite are padded by dummy value and gap filler ID is embedded in this pilot symbol by the gap filler when S-DMB signals are retransmitted by gap fillers. So using gap filler ID of S-DMB system, LBS such as region registration, distance and time to destination, alarm of local area information could be implemented. In the experiment to prove the performance of the proposed LBS system using the gap filler ID of the S-DMB system, the firmware of S-DMB chip composing of RF and baseband parts was lightly modified so that application processor was able to manipulate the gap filler ID and the its related regional information.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.4
• /
• pp.35-42
• /
• 2011

Link quality assessment is a crucial part of sensor network formation to stably operate large-scale wireless sensor networks (WSNs). A stability of path consisting of several nodes strongly depends on all link quality between pair of consecutive nodes. Thus it is very important to assess the link quality on the stage of building a routing path. In this paper, we present a link quality assessment method, Hybrid Link Quality Metric (HQLM), which uses both of LQI and RSSI from RF chip of sensor nodes to minimize set-up time and energy consumption for network formation. The HQLM not only reduces the time and energy consumption, but also provides complementary cooperation of LQI and RSSI. In order to evaluate the validity and efficiency of the proposed method, we measure PDR (Packet Delivery Rate) by exchanging multiple messages and then, compare PDR to the result of HQLM for evaluation. From the research being carried out, we can conclude that the HQLM performs better than either LQI- or RSSI-based metric in terms of recall, precision, and matching on link quality.

• The Journal of the Korea Contents Association
• /
• v.20 no.6
• /
• pp.99-113
• /
• 2020

In the future, robots and drones for the convenience of our lives in everyday life will increase. As a method for controlling this, a remote control or a human voice method is most commonly used. However, the remote control needs to be operated by a person and can not ignore ambient noise in the case of voice. In this paper, we propose an economical attitude information acquisition method to accurately acquire the posture information of the arm in real time under the assumption that the surround drones or robots can be controlled wirelessly with the posture information of the arm. For this purpose, the extended Kalman filter was used to eliminate the noise of the arm position information. in order to detect the arm movement, a low cost MEMS type sensor was applied to secure the economical efficiency of the apparatus. To increase the wear ability of the arm, We developed a compact and lightweight attitude information acquisition system by integrating all functions into one chip as much as possible. As a result, the real-time performance of 1 ms was secured and the extended Kalman filter was applied to acquire the accurate attitude information of the arm with noise removed and display the attitude information of the arm in real time. This provides a basis for generating commands using real-time attitude information of the arm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.21-31
• /
• 2017

In this paper, the Zynq system-on-chip (SoC) platform is used to design an adaptive noise reduction and edge-detection system using partial reconfiguration. Filters are implemented in a partially reconfigurable (PR) region to provide high computational complexity in real-time, 1080p video processing. In addition, partial reconfiguration enables better utilization of hardware resources in the embedded system from autonomous replacement of filters in the same PR region. The proposed edge-detection system performs adaptive noise reduction if the noise density level in the incoming video sequences exceeds a given threshold value. Results of implementation show that the proposed system improves the accuracy of edge-detection results (14~20 times in Pratt's Figure of Merit) through self-reconfiguration of filter bitstreams triggered by noise density level in the video sequences. In addition, the ZyCAP controller implemented in this paper enables about 2.1 times faster reconfiguration when compared to a PCAP controller.

• The Journal of the Korea Contents Association
• /
• v.4 no.4
• /
• pp.123-131
• /
• 2004

Internet is absolutely contributed to information technology revolution nowadays. Internet services such as voice and data, etc. are provided home or small office via home gateway. The development of communication equipment via home gateway is implemented rapidly, and its product various. This paper presents the design and implementation of the VoIP equipment including the telephone function based on the embedded environment and being connected to the home gateway and the PC because of taking 2-ethernet LAN ports. As developing environment, the STLC1502 developed at ST Microelectronics as single chip solution, VxWorks as RTOS, and C language as coding mechanism are used. The verification of the developed systems for the voice test is carried out for the gatekeeper via Internet. The performance parameter is considered as the call processing capacity measuring the time of the call setup and clearing, and the data processing capacity for the file transfer. As a call setup and clearing is about 95ms, the call processing capacity is about 10 calls per second. The data processing capacity is 5.7Mbps in case of file transfer of server and client environment. Therefore the performance result is satisfied in the aspect of the call processing time and the data transfer time in Internet.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.2
• /
• pp.31-37
• /
• 2001

Digital servo implementation in optical servo chip has been spotlighted since it is easy to integrate with other blocks and it has less sensitive characteristics change in terms of temperature variation and better flexibility to the system variation like pick-up. Therefore, Optical disc players adopted digital servo are increasing in market. However, one drawback of digital signal processor embedded digital servo is power consumption that is one of the most important factors of portable optical disc player system. For that reason, this paper introduces new architecture to reduce power consumption of digital servo by means of reducing DSP load but increasing minimum hardware size. The main idea of reducing power consumption of digital servo greatly is utilizing CDP characteristics as most operations are done and used up most operating steps of DSP at the initial time, but most power consumption is occurred in play mode. Therefore, if operating steps for digital filtering in play mode could be reduced greatly, power consumption of overall system can be reduced greatly. This paper shows an example that low power digital servo architecture whose current is reduced almost 83%, compare to that of digital servo which is not applied by the low power architecture introduced in this paper.

• Progress in Medical Physics
• /
• v.10 no.1
• /
• pp.41-46
• /
• 1999

There is necessity for making a smaller and more sensitive detector in small field sizes. This report assesses the suitability of metal-loaded thermoluminescent dosimeters for this purpose. Measurements were performed in the 6 MV photon and 6 MeV electron beams of a medical linear accelerator with LiF thermoluminescence dosimeters (TLD-100) embedded in solid water phantom. TLD-100 chips(surface area 3.2 $\times$ 3.2 $\textrm{mm}^2$) loaded with a metal plate(Tin or gold respectively) were used to enhance dose readings to TLD-100. Surface dose was measured for field size 10 $\times$ 10 $\textrm{cm}^2$ and 100 em SSD. Measurements have been made of the enhanced signal intensity and good linearity for absorbed dose with each metal. Using a 1 mm each metal on TLD-l00 in the beam increased the surface dose to 14% and 56% respectively for 6MV photon. In the case of 6 MeV electron, gold plate enhanced the TL response to 13%, but there is no difference for tin plate. The specific dose response of TLD-100 with thin metal plate increases with electron concentration of metal film, this is most likely due to increased electron scattered from the additional material with electron density higher than TLD-100. This emphasizes the role of TL dosimeters with metal as amplified dosimeters for therapeutic high energy x-ray beams. Due to the enhanced dose reading of TLD-100 with metal plate, it could be possible to develop smaller TL dosimeter with high sensitivity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.9
• /
• pp.936-943
• /
• 2013

This work presents the design and measured results of the single channel automotive radar system for 76.5~77 GHz long range FMCW radar applications. The transmitter uses a commercial GaAs monolithic microwave integrated circuit(MMIC) and the receiver uses the down converter designed using 65 nm CMOS process. The output power of the transmitter is 10 dBm. The down converter chip can operate at low LO power as -8 dBm which is easily supplied from the transmitter output using a coupled line coupler. All MMICs are mounted on an aluminum jig which embeds the WR-10 waveguide. A microstrip to waveguide transition is designed to feed the embedded waveguide and finally high gain horn antennas. The overall size of the fabricated radar system is $80mm{\times}61mm{\times}21mm$. The radar system achieved an output power of 10 dBm, phase noise of -94 dBc/Hz at 1 MHz offset and a conversion gain of 12 dB.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.388-396
• /
• 2017

Since there are many variables such as various poses, illuminations and occlusions in a face detection problem, a high performance detection system is required. Although CNN is excellent in image classification, CNN operatioin requires high-performance hardware resources. But low cost low power environments are essential for small and mobile systems. So in this paper, the CPU-FPGA integrated system is designed based on 3-stage cascade CNN architecture using small size FPGA. Adaptive Region of Interest (ROI) is applied to reduce the number of CNN operations using face information of the previous frame. We use a Field Programmable Gate Array(FPGA) to accelerate the CNN computations. The accelerator reads multiple featuremap at once on the FPGA and performs a Multiply-Accumulate (MAC) operation in parallel for convolution operation. The system is implemented on Altera Cyclone V FPGA in which ARM Cortex A-9 and on-chip SRAM are embedded. The system runs at 30FPS with HD resolution input images. The CPU-FPGA integrated system showed 8.5 times of the power efficiency compared to systems using CPU only.