• 대한기계학회논문집A
• /
• 제41권10호
• /
• pp.941-948
• /
• 2017

최근 화석연료 고갈 및 환경오염 문제를 해결할 수 있는 대안으로 수소에너지가 주목받고 있으며, 고효율 및 주행거리 향상을 위한 수소 자동차 개발에 따라 수소 저장 압력용기의 내용적 증가 및 구조안전성이 요구되고 있다. 그러나, 반구형의 바닥부보다 내용적이 큰 타원형 바닥부의 형상설계가 이루어지지 않았으며, 타원형 바닥부의 성형공정에 관한 연구 또한 미비한 실정이다. 이에 본 연구에서는 수소압력용기 라이너의 타원형 바닥부 장단축비에 따른 최대 내용적을 계산하고 유한요소해석을 통한 구조안전성 검증 및 이에 대한 이론적 고찰을 검토하였다. 또한, 바닥부 성형 공정해석을 통하여 제안된 최대 내용적을 갖는 타원형상의 성형 가능성을 확보하였다.

• Nuclear Engineering and Technology
• /
• 제51권6호
• /
• pp.1681-1688
• /
• 2019

In accordance with ASME Boiler and Pressure Vessel (B&PV) Code Sec.XI Appendix. G, a postulated crack is located at the beltline of a reactor pressure vessel because the neutron flux at the beltline is higher than elsewhere. This means that the distance between the core and the semi-spherical bottom head is longer than the distance between the core and the cylindrical beltline. However, several Small and Medium sized Reactors have bottom heads with diverse shapes, including dished or semi-elliptical shapes, to satisfy the requirement and performance. So, the aim of this paper is to evaluate the effect of crack location on Pressure-Temperature limit curve. To do this, two types of postulated crack location, such as beltline and semi-elliptical bottom head, were adopted to derive the Pressure-Temperature limit curve. Also, parametric studies for neutron flux, crack shape and so on were performed. As a result, core critical temperature of semi-elliptical bottom head is found to higher than that of beltline even when they have same values of thickness and neutron flux. This result will be useful to enhance the understanding of Pressure-Temperature limit curve.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.343-343
• /
• 2008

Newly designed structure of a thin ultrasonic rotary motor was proposed. Thin brass plate was used as a cross shaped vibrator and eight ceramic plates were attached on the upper and bottom sides of the brass plate as in Figure 1. The thin type ultrasonic motor has the structure adherent piezoelectric ceramic on the top and bottom surface of the thin elastic body. The direction of polarization is decided so as to occur the elliptical displacement in regular sequence at touch point A, B, C and D of stator contacted with rotor. By applying two electric fields which have 90 degree phase difference on the ceramics, each contact points make rotational displacements as in figure 2. Finite element analysis program ATILA was used to find the optimal size of the stator. As a result of the simulation, elliptical displacements of the tips were obtained at off-resonance frequencies. The maximum displacements of the contact tips were obtained at the length of 16[mm], width of 6[mm] and thickness of 0.4[mm]. Changes of the resonance frequencies were inversely proportional to the length of ceramic and proportional to the width of ceramic. Elliptical motions of the contact tips. of the stator were consistently obtained at off resonance frequencies. From a prototype motor, speed of 600[rpm] was obtained at 20[Vrms].

• 한국전기전자재료학회논문지
• /
• 제21권4호
• /
• pp.335-340
• /
• 2008

In this study, novel structured thin ultrasonic rotary motor has been proposed. Ultrasonic motors are based on an elliptical motion on the surface of elastic body. Thin brass plate was used as a cross shaped vibrator and eight ceramic plates were attached on upper side and bottom side of the brass plate. From the thin stator, elliptical displacements of the four contact tips were obtained. To find the optimal size of the stator, motions of the motors were simulated using ATILA by changing length, width and thickness of the ceramics. The stators had commonly three resonance peaks and contact tips of the stator moved on tangential or normal trajectories at these resonance peaks. The maximum displacements at the resonance peaks were compared. As results, maximum displacements of the contact tips were obtained at the length of 16 mm, width of 6 mm and thickness of 0.4 mm. Changes of the resonance frequencies were inversely proportional to the length of ceramic and proportional to the width of ceramic. The motor was fabricated by using the designed stator. And, the characteristics of the motor were compared with the simulated results. When the motor was fabricated with these results, speed fo 935 rpm was obtained by input voltage of 25 Vrms at 93.5 kHz.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술회의 초록집
• /
• pp.2-4
• /
• 2010

Nowadays, application fields using piezoelectric ceramics are various. On this paper, Characteristics of thin-type ultrasonic motor generating elliptical displacements has been analyzed by FEM, and then the motor was fabricated. Structure of the motor consists of sixteen ceramic pieces attached elastic body upper and bottom. Principle of the motor is to apply alternative voltages which have 90 phase difference to attached ceramics, and then elliptical displacements is generated at four edges of clastic body. And then rotor is rotated by the elliptical displacements. In case of ceramic thickness 1.5[mm], characteristic of the highest speed was found at 79[kHz]. In case of ceramic thickness 2[mm], Characteristic of the highest speed was observed at 77.5 [kHz]. Consequently, speed and torque of USM were increased linearly with increasing in applied voltage.

• 한국전기전자재료학회논문지
• /
• 제23권7호
• /
• pp.525-529
• /
• 2010

In this paper, the characteristics of a thin-type ultrasonic motor generating elliptical displacements analyzed by FEM are presented, and then fabrication of the motor is then described. The structure of the motor consists of sixteen ceramic pieces attached to the upper and bottom surfaces of an elastic body. The principle of the motor is to apply alternating voltages which have a 90 phase difference to the attached ceramics, and then elliptical displacements are generated at four edges of the elastic body. Then the rotor is moved by the elliptical displacements. In the case of a ceramic thickness of 1.5, the highest speed was obtained at 79 kHz. In the case of a ceramic thickness of 2 mm, the highest speed was obtained at 77.5 kHz. Consequently, the speed and torque of the ultrasonic motor (USM) increased linearly with increasing applied voltage.

• Wind and Structures
• /
• 제30권3호
• /
• pp.299-316
• /
• 2020

Based on wind tunnel tests, this paper investigates the aerodynamic behavior of a large span canopy roof with elliptical plan and hyperbolic paraboloid shape. The statistics of pressure coefficients and the peak factor distributions are calculated for the top and bottom faces of the roof, and the Gaussian or non-Gaussian characteristics of the pressure time-histories in different areas of the roof are discussed. The cross-correlation of pressures at different positions on the roof, and between the top and bottom faces is also investigated. Combination factors are also evaluated to take into account the extreme values of net loads, relevant to the structural design of canopies.

• 한국산림과학회지
• /
• 제6권1호
• /
• pp.6-10
• /
• 1967

In the present paper author investigated the symptom, pathogenic fungus and pathogenicity of Endothia canker of Carpinus laxiflora in Korea, and made clear the indistinct discription on its pathogen in the past. 1. The pathogen is identified as Endothia fluens (Schw.) Shear et Stevens. The discription is recorded as follows: Stromata cortical, erumpent, spherical or conical, outer yellowish-brown and inner yellowish, 0.5 to 2.5 mm in diameter; perithecia irregularly embeded in the bottom of stroma, 7 to 23 in a stroma usually spherical to elliptical or irregular, 235 to $370{\mu}$ in diameter, with black slender necks; each neck open the papilliate ostiole to the surface, about 250 to $400{\mu}$ in length; asci clavate or fusoid, colorless, 31.16 to 42.64 by 6.54 to $8.20{\mu}$ in size, average 37.02 by $6.84{\mu}$, with 8 ascospores in double line; ascospores elliptical, ovate or cylindrical, with rounded ends, hyaline, 1-septate, not constrict at the septum, 6.51 to 9.30 by 3.16 to $3.72{\mu}$, average 7.61 by $3.44{\mu}$ in size; pycnidia formed abundantly in stroma. spherical at first but later irregular large cavity by fussing each other; pycnospores oblong or rod-shaped, hyaline, non-septate, 3.8 by $1.9{\mu}$ in size; spore-horn formed abundantly under moist condition. 2. The pathogen is wound parasite invading the hosts through the wound. But after the infection is established, expanding the disease lesion is swiftly vigorus.

• 생명과학회지
• /
• 제14권4호
• /
• pp.689-695
• /
• 2004

2003년 11월 경상남도 부림면 신반리의 결구상추 재배 플라스틱 하우스내에서 늦가을부터 밑둥썩음병이 발생하여 수확기인 11월에 평균 5.3%의 발병율이 조사되었다. 이는 비교적 낮은 수치이나, 2차적으로 균핵병과 잿빛곰팡이병이 유발되어 큰 경제적 피해를 야기하였다. 이때의 병징은 아랫잎의 밑둥 부위에 수침상의 원형 내지 타원형의 담갈색 또는 갈색점무늬가 나타나고 진전되면 윗잎쪽으로 병반이 부정형으로 크게 확대되어 결국 잎이 무르게 썩고 누렇게 변하며 종이처럼 말라죽는 증상이 관찰되었다. 이에, 밑둥썩음병이 발생한 지역의 병든 식물체와 토양으로부터 병원균을 분리하였으며 이 중 병원성이 가장 강한 PY-1 균주가 Rhizoctonia solani AG1 (IB)로 동정되었다. 균사생육 최적온도는 25∼30$^{\circ}C였으며, 병원성 검정을 위해 가장 효과적인 접종원으로 검정 방법이 용이하면서도 효율적인 균사조각 부유액 접종원을 생육상내 폿트 검정용으로 선발하였고, 토양내 부생적 착생을 위한 플라스틱 하우스내 토경 재배 검정용으로는 WRSP배지 접종원을 선발하였다. 또한, 선발된 각 접종원의 최적 처리농도 및 처리량에서는 각각 균사조각 부유액 접종원의 경우, 평균 주당 51.1%의 발병도를 보인 $A_{550}$=1.0농도를 가장 적합한 처리 농도로 선발하였으며, WRSP 배지 접종원의 처리량 비교에서는 평균 주당 61.6%의 발병도를 보인 40 $m\ell$를 최적 처리량으로 선발하였다.

• 한국기계가공학회지
• /
• 제12권4호
• /
• pp.81-86
• /
• 2013

For a 2-dimensional(2D) vibration milling, an excitation work-table was developed using two piezoelectric materials orthogonally arranged, where the trochoidal trajectory of a milling tool is combined with 2 dimensional elliptical vibration of a work-table. Applying 3kHz excitation frequency and 7~8mm amplitude of vibration to micro milling process with brass and nickel materials, the roughness in both bottom and side surface is much more improved compared to the surface by conventional milling process, which is attributed to decreased frictional force, increased cutting speed, and rubbing effect of a 2 dimensional vibration.