• Tribology and Lubricants
• /
• v.30 no.1
• /
• pp.59-63
• /
• 2014

Laser Surface Texturing(LST) is a surface engineering process used to improve tribological characteristics of materials by creating patterned microstructures on the mechanical contact surface. In LST technology, a pulsated laser beam is used to create arranged dimples on a surface by a material ablation process, which can improve such as load capacity, wear resistances, lubrication lifetime, and reduce friction coefficients. In the present study, the effect of multi-scale LST on lubricant regime was investigated. A pulsed Nd:YAG laser was applied on the bearing steel(AISI 52100) to create arranged dimples. To optimize the surface texturing effect on friction, multi-scale texture dimples with some specific formula arrays were fabricated by combining circles, ellipses and the laser ablation process. The tribological testing of multi-scale textured surface was performed by a flat-on-flat unidirectional tribometer under lubrication and the results compared with that of the non-textured surface. Through an increase in sliding speed, the beneficial effect of multi-scale LST performance was achieved. The multi-scale textured surface had lower friction coefficient performances than the non-textured surface due to the hydrodynamic lubrication effect.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.2
• /
• pp.169-177
• /
• 2015

Because technology of the sintering process is highly advanced, the gerotor used in the internal gear pumps of vehicles has advantages for manufacturing complex profiles and obtaining durability and minimization. However, it has been necessary to continuously improve the flow rate and noise of internal gear pumps for better fuel efficiency. The existing rotor was designed using a translation algorithm. This caused a discontinuity of the rotor profile, which had adverse effects on the performance. In this study, to improve the discontinuity of the profile, a new design program using a rotation and translation algorithm was developed, and two types of combined multiple profiles (three-ellipses and ellipse 1-involute-ellipse 2) were generated. Then, the performances (flow, flow rate, specific sliding, and pressure angle) of these profiles were calculated. On the basis of the calculation results for the performances, optimal designs of the two types were carried out and verified by comparing their performances with those of the existing rotor profiles.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.3
• /
• pp.1-8
• /
• 2009

In this study the concepts on the elongation, compactness and equivalent ellipse of catchment plan-forms are applied to the real basins considering their theoretical frameworks. The catchment plan-forms and corresponding equivalent ellipses, obtained from GIS, are inspected on downstream directions. As a result the catchment plan-forms seem to be the population of the basin shapes which come from the random interaction between two conjectures on Hack's law being controversial recently. The ratio of the maximum and minimum inertia moments of the catchment plan-form Ri is more sensitive to evaluate the elongation of the basin shapes than the ratio of the main channel length and diameter of circle which has the same area as the catchment plan-form E. The catchment plan-forms compactness measures show distinct aspects according to their different definitions. These results are caused by the difficulties to quantification of the shapes and the composite consideration with more than two compactness measures and the fractal analysis are therefore required to recover them.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.2
• /
• pp.141-148
• /
• 2016

Annual and monthly pollock catches, CPUE and fishing grounds in the high seas of Bering Sea between 1984 and 1992 were analyzed for centroid distribution and bivariate ellipses of trawlers of South Korea, Japan, Poland and China. The catch amount differed by country as 56.1%, 21.7%, 20.4% and 1.8% were caught by Japan, Korea, Poland and China respectively. Japan recorded the highest mean CPUE at 5.7 ton/hour while it was 4.3 ton/hour for Poland, 3.9 ton/hour for Korea and 2.4 ton/hour for China. Cumulative catch varied by month, with the minimum of 137,000 ton in March and the maximum of 848,000 ton in December. Monthly mean of CPUE was the lowest in February (2.0 ton/hour) and the highest in November (6.3 ton/hour). The centroid distribution of monthly fishing ground was located at a southern spot ($56^{\circ}$ 05'N, $178^{\circ}$ 55'E) in January, and it moved anti-clockwise toward $56^{\circ}$ 37'N, $178^{\circ}$ 24'E in December. Fishing grounds were scattered more by the east-west direction than by the south-north direction. The fishing grounds were similar for Korean, Japanese and Polish trawlers, but Chinese trawlers that fished only from July to December showed distinctively different fishing grounds from the others.

• Journal of the Korean Institute of Gas
• /
• v.18 no.2
• /
• pp.48-54
• /
• 2014

A unique optical waveguide structure is proposed to enhance the optical characteristics of alcohol screening sensors. This structure is then simulated. The structure consists of two elliptical waveguides that have a common focus to one side and has an IR source and detector at each of the other focal points of the ellipses. When the angle between the two elliptical waveguides is increased from 30 degrees to 90 degrees, the maximum level of irradiance is greatly decreased, falling from $2.23{\times}10^6 W/m^2$ to $5.74{\times}10^5W/m^2$. However, the diameter of the incident rays is at a minimum of 1.86mm and the total incident flux is less than 10% lower when compared to the structure at $90^{\circ}$. It can be seen from the simulation results that this structure might enhance the sensitivity of an optical gas sensor which has a large absorption wavelength.

• Ocean Science Journal
• /
• v.42 no.3
• /
• pp.153-163
• /
• 2007

This study is based on a series of numerical modeling experiments to understand the tidal circulation in the Kangjin Bay (KB). The tidal circulation in the KB is mostly controlled by the inflow from two channels, Noryang and Daebang which introduce the open ocean water into the northern part of the KB with relatively strong tidal current, while in the southern part of the KB, shallowest region of the entire study area, weak tidal current prevails. The model prediction of the sea level agrees with observed records at skill scores exceeding 90 % in terms of the four major tidal constituents (M2, S2, K1, O1). However, the skill scores for the tidal current show relatively lower values of 87, 99, 59, 23 for the semi-major axes of the constituents, respectively. The tidal ellipse parameters in the KB are such that the semi-major axes of the ellipse for M2 range from 1.7 to 38.5 cm/s and those for S2 range from 0.5 to 14.4 cm/s. The orientations of the major-axes show parallel with the local isobath. The eccentricity values at various grid points of ellipses for M2 and S2 are very low with 0.2 and 0.06 on the average, respectively illustrating that the tidal current in the KB is strongly rectilinear. The magnitude of the tidal residual current speed in the KB is on the order of a few cm/s and its distribution pattern is very complex. One of the most prominent features is found to be the counter-clockwise eddy recirculation cell at the mouth of the Daebang Channel.

• Journal of Educational Research in Mathematics
• /
• v.17 no.2
• /
• pp.111-125
• /
• 2007

In this article, we introduce an example about 'computers and mathematics education' and discuss its educational meaning. First, we survey two microworlds of Logo and DGS, which are two different representation systems for geometric phenomena. And we propose needs of connecting two microworlds with common perspective. And we suggest a mediation model that connects two representations in a microworld. Using this mediation model(Circle model), we construct a circle, a ellipse, and a cardioid with two different representations. It is important that the mediation model makes it possible that we translate descriptions from one representation into the other, and guess perimeters of planar curves. We also discuss roles and mathematical implications of this mediation model by error case in calculating perimeters of ellipses.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.1087-1099
• /
• 1998

In the content-based image coding, where each object in the scene is encoded independently, the shape, texture and motion information are very important factors. Though the contours representing the shape of an object occupy a great amount of data in proportion to the whole information, they strongly affect the subjective image quaility. Therefore, the distortion of contour coding has to be minimized as much as possible. In this paper, we propose a new method for the contour coding in which the contours are approximated to polygon and the eorror signal occurring from polygonal approximation are transformed with new basis functions. Considering the facts that confour segments occurring from polygonal approximation are smooth curves and error signals have two zero-ending points, we design new basis functions based on the Legendre polynomial and then transform the error signals with them. When applied to synthetic images such as circles, ellipses and etc., the proposed method provides, in overall, outstanding results in respect to the transform coding gain compared with DCT and DST. And in the case when applied to natural images, the proposed method gives better image quality over DCT and comparable results with DST.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.1100-1112
• /
• 1998

In this paper, a novel method of minimizing the phase error is proposed. A DP-PLL system using this method is implemented and its performacnce is investigated, too. The DP-PLL system detects the phase error between reference clock and locally generated system clock. The phase difference is then reported as a PEV(Phase Error Variation), which is propoced from the delayted n-tap rising dege clock circuit with 5ns resolution in the phase detector. The algorithm is used to track the optimal DAC coefficients, which are adjusted from sample to sample in such a way as to minimize the PEV. The proposed method is found to have remarkable good potential for fast and accurate phase error tracking characteristic. The algorithm shows good performance to supress the low frequency jitter.-ending points, we design new basis functions based on the Legendre polynomial and then transform the error signals with them. When applied to synthetic images such as circles, ellipses and etc., the proposed method provides, in overall, outstanding results in respect to the transform coding gain compared with DCT and DST. And in the case when applied to natural images, the proposed method gives better image quality over DCT and comparable results with DST.

• Journal of Environmental Science International
• /
• v.15 no.10
• /
• pp.951-960
• /
• 2006

The eco-hydrodynamic model was used to estimate the environmental capacity in Gamak Bay. It is composed of the three-dimensional hydrodynamic model for the simulation of water flow and ecosystem model for the simulation of phytoplankton. As the results of three-dimensional hydrodynamic simulation, the computed tidal currents are toward the inner part of bay through Yeosu Harbor and the southern mouth of the bay during the flood tide, and being in the opposite direction during the ebb tide. The computed residual currents were dominated southward flow at Yeosu Harbor and sea flow at mouth of bay, The comparison between the simulated and observed tidal ellipses at three station showed fairly good agreement. The distributions of COD in the Gamak bay were simulated and reproduced by an ecosystem model. The simulated results of COD were fairly good coincided with the observed values within relative error of 1.93%, correlation coefficient(r) of 0.88. In order to estimate the environmental capacity in Gamak bay, the simulations were performed by controlling quantitatively the pollution loads with an ecosystem model. In case the pollution loads including streams become 10 times as high as the present loads, the results showed the concentration of COD to be $1.33{\sim}4.74mg/{\ell}(mean\;2.28mg/{\ell})$, which is the third class criterion of Korean standards for marine water quality In case the pollution loads including streams become 30 times as high as the present loads, the results showed the concentration of COD to be $1.38{\sim}7.87mg/{\ell}(mean\;2.97mg/{\ell})$, which is the third class criterion of Korean standards for marine water quality. In case the pollution loads including streams become 50 times as high as the present loads, the results showed the concentration of COD to be $1.44{\sim}9.80mg/{\ell}(mean\;3.56mg/{\ell})$, which is the third class criterion of Korean standards for marine water quality.