• Journal of Industrial Technology
• /
• v.29 no.A
• /
• pp.155-159
• /
• 2009

Recently, a Elevator system is specially important in human life. Also a elevator door is important to a elevator system. In this paper, induction motor drive system using vector control was developed with high performance for elevator door system. For this, velocity pattern generation method was proposed. The proposed system is verified by experimental result with 400[w] induction motor drive system for the elevator door.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.4
• /
• pp.325-332
• /
• 2011

This paper is concerned with the active control experiments on elevator vibrations by means of the active roller guide. To this end, a roller guide was designed using a voice-coil actuator and linear guide. A simple proportional control algorithm combined with the band-pass filter was implemented using the DSP. Based on the initial experiments, a new control system which can handle lateral and front-back vibrations of elevator was built and tested using the elevator test tower. The experimental results show that the elevator vibrations are reduced by the active control technique.

• 전기의세계
• /
• v.30 no.1
• /
• pp.55-63
• /
• 1981

This paper deals with the drive contrl of common elevator systems which may be realized with .mu.p-controlled selective-collective elevator systems. Incorporation on non-contact point circuits instead of electromagnetic relays in such an elevator system results in miniaturization of complicated hardware controllers currently being used. The drive control method is implemented by software programming. The important features are not only technical advantages such as higher performance, high speed data processing and more improved reliability, but also lower cost as compared with the conventional elevator drive control units equipped with a number of sequential electromagnetic relays and even more recent static IC logic circuits.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.731-736
• /
• 1993

In this paper, a predictive fuzzy control algorithm to supervise the elevator system with plural elevator cars is proposed and its performance is evaluated. Elevator group controller must decide the service elevator for a registered hall call to satisfy the multiple control objects. The proposed group control algorithm ensures the efficient operations of the group cars and provides the improved level of service, coping with multiple control objects and uncertainty of system state. The feasibility of the proposed control algorithm is evaluated by simulation on computer.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.5
• /
• pp.622-629
• /
• 1999

This paper discusses a real time multi-tasking system model and a development environment for an elevator control system. Recently, as the elevator systems become large-scaled and operate with high speed, there are lots of software tasks to be processed with time constraints. Thus, the control systems are designed with distributed control structure and characteristics of typical real time systems. For stuructural design of such real time system, we introduce a multi-tasking model based on a real time operating system model and an software development environment based on virtual protopyping which simulates real system operation in the cross development of a new elevator system with distributed control structure and its system reliability can be verified through numerous field tests.

• International journal of advanced smart convergence
• /
• v.8 no.3
• /
• pp.184-192
• /
• 2019

The existing digital signage systems inside the elevators are a lack of tailored contents appropriate to the space and environment inside or outside the elevators. Also, they almost impossible to flexibly respond to various contents disclosure according to the demand of the consumers or the elevator markets. Therefore we design and implement an IoT(Internet of Things)-based smart digital signage system for the safety of elevator passengers.. In order to provide IoT-based information to the smart digital signage within the elevator, we propose an IoT system as a set-top box with gyroscope sensor, acceleration sensor, RFID(Radio-Frequency Identification), fine dust sensor, etc., which processes various data collected by the sensors and provides the elevator passengers with various tailored contents such as elevator driving information, environmental information inside and outside the elevator, and disaster information in addition to simple advertisement information. The proposed IoT system is a set-top box that operates the smart digital signage and has an independent information control processor based on the IoT sensors that do not depend on the elevator control system. For the proposed smart digital signage, it supports an operating system that is independent of the elevator driving service as well as the media service. So the smart signage system has a characteristic that it does not depend on the elevator control system since it is a stand-along IoT-based information control system. With the proposed system providing intuitive content for the surge, steep descent, and radical movements of an elevator due to an emergency situation, the elevator passengers should be able to recognize the situation quickly and respond accordingly. In the near future, the proposed system will expand the market of digital signage applied in conjunction with the development of contents in the disaster, safety and environment fields, and expect expected to revitalize related industries associated with signage.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.461-466
• /
• 2003

This paper presents the speed control of the surface-mounted permanent-magnet synchronous motors (SMPMSM) for the elevator drive. The elevator motor needs to be a compact and slim type. Essentially, the proposed scheme uses a vector control algorithm for a speed and torque control. This system is implemented using a high speed 32-bit DSP (TMS320C31-50), a high-integrated logic device FPGA (EPF10K10-Tl144-3) to design compactly and Inexpensively The proposed scheme is verified through digital simulation and experiments for a three-phase 13.3kW SMPMSM as a MRL(MachineRoomless) elevator motor ill the laboratory. Finally, experiment of the test tower was performed with a 48kW PWM converter-inverter system for a high- speed elevator .

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.6
• /
• pp.556-564
• /
• 2013

This paper proposes an initial rotor position detecting algorithm of a PM synchronous motor using an incremental encoder. The proposed algorithm estimates the phase offset between the rotor magnetic flux and the Z-pulse of the incremental encoder by applying six aligning mode current control. The absolute rotor position for driving a PM synchronous motor is calculated by using the phase offset of the Z pulse and A, B pulse signals of the encoder. The PMSM drives based on the estimated rotor position is applied to the elevator door system. The door length is measured on line at first setup of the elevator. The speed control for open, close, and reopen of the elevator door is also presented and the proposed algorithm for the elevator door system is verified by experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.390-394
• /
• 1994

A elevator group supervisory system is designed to perform efficient operation of multiple elevators, and its basic function is to assign an appropriate elevator to a given hall-cell. In this paper, in order to improve elevator group control performance, we propose a new dispatching system which includes fuzzy multi-attribute decision making(MADM). In most cases, the purpose of group control is to maximize control goals as much as possible. Unfortunately, the decision of optimal elevator to a given hall cell is made with very uncertain information of the system, and some of control goals are related each other. The uncertainty is mainly resulted from car calls generated by serving hall calls. A fuzzy MADM algorithm is proposed to deal with these problems to improve system performance.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.3
• /
• pp.41-47
• /
• 2003

In this study an elevator plant model is made with an electro-hydraulic servo valve and a single rod cylinder. A PID controller, a velocity feedback PID controller and a MRAC controller ate designed. Experimental apparatus including an elevator plant model and these controllers are constructed. In case of experiment, external load which is made with a hydraulic cylinder and a pressure control valve burdens varying load to the elevator plant model being driven. With experiment, the control performances of three proposed control methods are compared.