• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.E
• /
• pp.59-66
• /
• 1990

Abstract The formulation of the probabilistic finite element method was briefly reviewed. The method was implemented into a computer program for frame analysis which has the same analogy as finite element analysis. Another program for Monte Carlo simulation of finite element analysis was written. Two sample structures were assumed and analized. The characteristics of the second moment statistics obtained by the probabilistic finite element method was examined through numerical studies. The applicability and limitation of the method were also evaluated in comparison with the data generated by Monte Carlo simulation.

• 한국전산유체공학회:학술대회논문집
• /
• 2006.05a
• /
• pp.21-26
• /
• 2006

A large-scale finite element simulation and modeling method is presented for environmental flows in urban area. Parallel stabilized finite element method based on domain decomposition method is employed for the numerical simulation. Several GIS and CAD data are used for the preparation of the shape model for landform and urban structures. The present method Is applied to the simulation of flood flow and wind flow In urban area. The present method is shown to be a useful planning and design tool for the natural disasters and the change of environments in urban area.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.11
• /
• pp.114-123
• /
• 1996

The major objective of the present paper is to estabilish analytical technique in order to closely understand and analyze the actual shearing process. First of all, isothermal and non-isothermal FE-simulation of the shearing process are carried out using finite element software DEFORM. Based on preliminary simulation using DEFORM, the finite element program to analyze two dimensional shearing process is developed. The ductile fracture criterion and the element kill method are also used to estimate if and where a fracture will occur and to investigate the features of the sheared surface in shearing process. It can be seen that the developed program combined with the ductile fracture criterion and element kill method has enabled the achievement of FE-simulation from initial stage to final stage of shearing process. The effects of punch-die clearance on shearing process are also investigated. In order to verify the effectiveness of the proposed technique the simulation results are compared with the known expermental data. It is found that the results of the present work are in close agreement with the published experimental results.

• Korean Journal of Adult Nursing
• /
• v.20 no.5
• /
• pp.731-742
• /
• 2008

Purpose: The purpose of this study was to analyze how a nursing student recognizes PBL with simulation education and its relationship to academic achievement. Methods: The study objects were the students in C college who learn through PBL using simulator for 15 weeks(September 2007 to December 2007). Learning element recognition was developed by Cho(2002) and three key evaluations(performance, self-evaluation, and colleague evaluation) were designed by professors. Results: Learning element recognition ranged from 2.37 to 4.83 with the average at 3.94. For Learning element recognition, students who preferred discussion score 4.15. This was statistically more significant than those who do not. Students who preferred presentations show significantly higher score in colleague evaluation. For Learning element recognition and academic achievement, self-evaluation and colleague evaluation showed relationship to PBL learning element. Conclusion: There was definitely a relationship with PBL learning element and academic achievement after learning the PBL with simulation education.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.229-234
• /
• 1994

The major objective of the present paper is to estabilish finite element simulation technique in order to further analyze the shearing process. For this the ductile fracture criterion and element kill method are used in the present work. It is postulated that a fracture initiation is based on the magnitude of local effective strain. The features of sheared surface are easily observed by the element kill method. The simulation results are compard with existing experimental results. It is found that the results of the present work are close agreement with the existing results.

• Structural Engineering and Mechanics
• /
• v.85 no.2
• /
• pp.265-274
• /
• 2023

The spherical steel bearings (SSBs) has been gradually replaced traditional rubber bearings and extensively applied to high-speed railway (HSR) bridges in China, due to their durability and serviceability. Nevertheless, SSB is generally simplified to the ordinary constraints in the finite element model, which cannot reflect its detailed mechanical characteristics, especially its seismic performance. To provide a more precisely simulation, an innovative and simplified finite element simulation method is proposed and the combined element group is developed in ANSYS. The primary parameters were determined by means of the performance test of SSB. The finite element model of SSB applied to a single-span HSR simply supported girder bridge was established through the proposed method. The seismic performance of the SSB was further investigated. A shake table test was conducted to evaluate the accuracy of the proposed simulation method. It is found that the numerical results could have a good agreement with the experiment, namely, the proposed method is feasible and efficient.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.5
• /
• pp.686-695
• /
• 2009

Flow characteristics in linear axial cascade have been studied using large eddy simulation(LES) based on finite element method(FEM) to investigate details of the leakage flow in the tip clearance of axial flow rotor. STAR-CD(FVM) and PAT-Flow(FEM) have been adopted to solve the Navier-Stokes equations for the simulation of the unsteady turbulent flow. Numerical results from the present study have been compared with the existing experimental results to investigate a tip clearance effect on velocity profile and static pressure distribution on blade surface at various spanwise positions. Both simulation results agree well with the experimental data. However, it has been shown that the results of finite-element large-eddy simulation agree better with experimental data than $k-{\varepsilon}$ turbulent model based on finite volume method regarding the tip vortex geometry and static pressure distribution at the center of the tip vortex core. As a result of this study, it is shown that finite-element large-eddy simulation method can predict more exactly on the tip leakage vortex flow and behind flow field.

• Journal of Digital Convergence
• /
• v.4 no.1
• /
• pp.17-30
• /
• 2006

Recently, Modeling and Simulation, which have been received attention in various in dustries such as national defence, eduction and entertainment, have been researched, and related applications have been developed actively. Especially, it is focused on the to chnology of a virtual reality and a virtual simulation which represents the implementation technology for the simulation education related to the e-Learning industry. However, a solution is needed to fulfill the lack of technology and research about standardize d data elements which could be applied to virtual simulation technologies in common. Therefore, this article suggests the virtual simulation data elements to increase the educational effect of a virtual simulation and interoperability of data among LMS through reference to korean and international standards and the result of related area analysis. In other words, this article aims to define the expression of data element and to propose the guideline elements in the virtual simulation scope.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.58-61
• /
• 2001

An implicit finite element formulation for axisymmetric tube hydroforming is investigated. In order to describe normal anisotropy of the tube, Hill's non-quadratic yield function is employed. The frictional contact between die and tube and frictionless contact between tube and fluid are considered using the mesh-normal vector computed from finite element mesh of the tube. In order to verify the validity of the developed finite element formulation, the axisymmetric tube bulge test is simulated and simulation results are compared with experimental measurements. In the axisymmetric tube hydroforming process, an optimal hydraulic curve is pursued by performing the simulation with various internal pressures and axial forces.

• Transactions of Materials Processing
• /
• v.11 no.1
• /
• pp.75-83
• /
• 2002

Recently, the hydroforming process is widely applied to the automotive industry and rapidly spreaded to other industries. In this paper, An implicit finite element formulation for simulating axisymmetric tube hydroforming processes is performed. In order to describe normal anisotropy of the tube, Hill's non-quadratic yield function is employed. The frictional contact between die and tube and the frictionless contact between tube and fluid are considered using the mesh-normal vectors computed from the finite element mesh of the tube. The complete set of the governing relations comprising equilibrium and interfacial equations is linearized for Newton-Raphson procedure. In order to verify the validity of the developed finite element formulation, the axisymmetric tube bulge test is simulated and the simulation results are compared with experimental measurements. In a simulation of stepped circular tube hydroforming processes, an optimal hydraulic pressure curve is pursued by considering simultaneously internal pressures and axial forces.