• Transactions on Electrical and Electronic Materials
• /
• 제3권3호
• /
• pp.14-17
• /
• 2002

The HDP (High Density Plasma) CVD process consists of a simultaneous sputter etch and chemical vapor deposition. As CMOS process continues to scale down to sub- quarter micron technology, HDP process has been widely used fur the gap-fill of small geometry metal spacing in inter-metal dielectric process. However, HBP CVD system has some potential problems including plasma-induced damage. Plasma-induced gate oxide damage has been an increasingly important issue for integrated circuit process technology. In this paper, thin gate oxide charge damage caused by HDP deposition of inter-metal dielectric was studied. Multiple step HDP deposition process was demonstrated in this work to prevent plasma-induced damage by introducing an in-situ top SiH$_4$ unbiased liner deposition before conventional deposition.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.548-550
• /
• 2002

본 장치는 다층막 스퍼터링 증착장치로써 박막을 증착시키는데 용이하게 설계하는 것이 목적이며, 박막두께가 균일하게 증착되고 진공조 내부의 압력을 일정하게 제어가 가능하고 배기시스템은 스퍼터실과 증착실의 진공배기를 공용으로 구조를 설계하여 장치의 스퍼터링 증착조건에 적합하도록 연구실험용으로 설계되어졌다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.391-394
• /
• 1999

The diamond thin films are deposited on silicon using MPCVD(Microwave Plasma Chemical Vapor Deposition) method at various deposition microwave power and time. Diamond is deposited with 100 sccm H$_2$ and 2 sccm CH$_4$ by MPCVD. The crystallinity of diamond thin films were increased with increase of microwave power. The growth rate of diamond thin films were increased with increase of time.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 춘계학술대회 논문집
• /
• pp.42-45
• /
• 1992

The poly silicon thin films were prepared by solid phase crystallization at 600$^{\circ}C$ of amorphous silicon films deposited on Corning 7059 glass and (100) silicon wafer with thermally grown SiO$_2$substrate by plasma enhanced chemical vapor deposition with varying rf power, deposition temperature, total flow rate. Crystallization time, microstructure, absorption coefficients were investigated by RAMAN, XRD analysis and UV transmittance measurement. Crystallization time of amorphous silicon films was increased with increasing rf power, decreasing deposition temperature and decreasing total flow rate.

• Transactions on Electrical and Electronic Materials
• /
• 제15권6호
• /
• pp.344-347
• /
• 2014

This study was carried out on DLC thin film deposition technology used in infrared optical system production as a method of reducing the shape changes of the molding core and the consequent loss of life. Experiments on the deposition on silicon wafer and tungsten carbide used as a substrate for molding core were conducted at each processing condition using a filtered arc system, and it was found that the surface and mechanical properties were of the greatest quality when the substrate bias voltage of -150 V was used. In addition, it was confirmed that the PV and Ra characteristics were improved by the deposition of the DLC thin film.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1577-1579
• /
• 2003

AlN thin films are prepared on Si (111) substrate by RF magnetron sputtering. Two-step deposition method is proposed to obtain AlN thin films with high c-axis (002)-TC value and low surface roughnesses. For all the deposited AlN films, the c-axis (002)-orientation, surface mophology, and roughness are characterized in terms of deposition conditions FEAR devices with Al/AlN/Mo/Si(111) configuration are also fabricated. From the frequency response characteristics, the return loss and electromechanical coupling contant($k_t{^2}$) are estimated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.621-624
• /
• 1999

Metalization technology of the fine patterns by electroless plating is required in place of electrodeposition as high-density printed boards(PCR) become indispensable with the miniaturization of electronic components. Electroless nickel plating is a suitable diffusion barrier between conductor meta1s, such as Al and Cu and solder is essetional in electronic packaging in order to sustain a long period of service. Moreover, Electroless nickel has particular characteristics including non-magnetic property, amorphous structure. wear resistance, corrosion protection and thermal stability In this study fundamental aspects of electroless nickel deposition were studied with effort of complexeing agents of different kinds. Then the property of electroless deposit are controlled by the composition of the deposition solution the deposition condition such as temperature and pH value and so on. the characteristics of the deposits has been carried out.

• 한국전기전자재료학회논문지
• /
• 제18권2호
• /
• pp.164-168
• /
• 2005

Piezoelectric ZnO thin films were for the first time formed on SiO$_2$/Si(100) substrate using 2-step deposition, atomic layer deposition(ALD) and RF magnetron sputtering deposition, for film bulk acoustic resonator(FBAR) applications. The ZnO buffer layer by ALD was deposited using alternating diethyl zinc(DEZn)/$H_2O$ exposures and ultrahigh purity argon gas for purging. The ZnO films by 2-step deposition revealed stronger c-axis-preferred orientation and smoother surface than those by the conventional RF sputtering method. The solidly mounted resonator(SMR)-typed FBAR fabricated by using 2-step deposition method revealed higher quality factor of 580 and lower return loss of -17.35dB. Therefore the 2-step deposition method in this study could be applied to the FBAR device fabrication.

• Transactions on Electrical and Electronic Materials
• /
• 제5권1호
• /
• pp.11-14
• /
• 2004

An rf triode magnetron sputtering system is designed and installed its construction in vacuum chamber. In order to calibrate the rf triode magnetron sputtering for thin films deposition processes, the effects of different glow discharge conditions were investigated in terms of the deposition rate measurements. The basic parameters for calibrating experiment in this sputtering system are rf power input, gas pressure, plasma current, and target-to-substrate distance. Because a knowledge of the deposition rate is necessary to control film thickness and to evaluate optimal conditions which are an important consideration in preparing better thin films, the deposition rates of copper as a testing material under the various sputtering conditions are investigated. Furthermore, a triode sputtering system designed in our team is simulated by the SIMION program. As a result, it is sure that the simulation of electron trajectories in the sputtering system is confined directly above the target surface by the force of E${\times}$B field. Finally, some teats with the above 4 different sputtering conditions demonstrate that the deposition rate of rf triode magnetron sputtering is relatively higher than that of the conventional sputtering system. This means that the higher deposition rate is probably caused by a high ion density in the triode and magnetron system. The erosion area of target surface bombarded by Ar ion is sputtered widely on the whole target except on both magnet sides. Therefore, the designed rf triode magnetron sputtering is a powerful deposition system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.266-267
• /
• 2007

$Ba_{0.5}Sr_{0.5}TiO_3$(BST) films with different deposition temperatures were deposited on $Al_2O_3$ substrate by Nd:YAG Pulsed Laser Deposition(PLD). The deposition conditions to achieve high crystal structures and dielectric properties were optimized for both techniques. The structural characterization on the BST thin films was performed by X-Ray Diffraction(XRD) and Atomic Force Microscopy (AFM). Effects of post-deposition annealing of BST films were investigated. The best dielectric properties were obtained on $800^{\circ}C$ deposited BST film with post-deposition annealing at $1100^{\circ}C$ in flowing $O_2$ atmosphere for 2hours.