• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.210-213
• /
• 2004

In this paper, we propose the passive PFC(Power Factor Correction) circuit of an electronic ballast with the constant power the detection circuit for 110 or 220 volt. The proposed PFC circuit is composed with the modified dither circuit and the input voltage detection circuit. We have concluded that the proposed method is the attractive method to improve of power factor for the electronic ballast with the input voltage regulation and it is a similar experimental results with other active power factor correction method using other PWM ICs.

• The Journal of the Korea institute of electronic communication sciences
• /
• 제18권4호
• /
• pp.625-640
• /
• 2023

This paper propose a circuit that can measure the inductance of an inductive sensor used in IOT applications. The circuit was constructed using the characteristics of an RL low-pass filter circuit, comparator, current control switch, and capacitor, and the inductance value within the range 1[nH] < L ≤ 1[H] can be derived through the duration time during the output voltage of the RL low-pass filter circuit is greater than the reference voltage.

• Journal of Practical Engineering Education
• /
• 제7권2호
• /
• pp.113-117
• /
• 2015

In this academic paper, we introduce a bread board simulation which is developed based on HTML language. this program is developed because actual electronic practices have some problems. Electronic circuit practice using bread board is widely practiced in colleges or high schools in South Korea, but actual electronic circuit practice needs lots of consumable stuff, and they are needed to be purchased and managed continuously. Besides, composing complicated electronic circuit restricts the efficiency of studying. Therefore, we propose breadboard simulation program which helps to resolve those problems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제21권5호
• /
• pp.885-892
• /
• 2017

In this paper, we proposed a novel crowbar circuit for high-speed discharge charge switching to solve discharge charge-time delay of supply voltage in the conventional crowbar circuit. The proposed circuit is designed to increase the charge-speed after high-speed discharge of supply voltage, thereby reducing the time exposed to radiation damage and, the normal operation time of electronic system after passing the pulse radiation. The simulation of the discharge charge-times before the implement of the hardware is conducted using Cadence's pspice tool, and DUT (Device Under Test) board is fabricated in the device level. The comparison measurement of the crowbar circuits is performed on the satellite-electronic device for 24V. As the result, we confirmed the high-speed function of the proposed circuit by improvement of the discharge-speed 96.8% and the charge-speed 27.3% as compared with the conventional circuit.

• Journal of the Semiconductor & Display Technology
• /
• 제21권2호
• /
• pp.101-106
• /
• 2022

In this paper, WBG semiconductor such as SiC and GaN were applied as power switches for LCL circuit that can be applied to satellite power systems and the test results of the LCL circuit are reported. P-channel MOSFET and N-channel MOSFET, which were generally used in the conventional LCL circuit, were applied together to expand the utility of the test results. The design and stability evaluation were performed using a Micro Cap circuit simulation program. For the test circuit, a module using each switch was manufactured, and a total of 5 modules were manufactured and the steady state and transient state characteristics were compared. From the experimental results, the LCL circuit for power supply of the satellite power system constructed in this paper satisfied the constant current and constant voltage conditions under various operating conditions. The P-channel MOSFET showed the lowest efficiency characteristics, and the three N-channel switches of Si, SiC and GaN showed relatively high efficiency characteristics of up to 99.05% or more. In conclusion, it was verified that the on-resistor of the switch had a direct effect on the efficiency and loss characteristics.

• The Journal of the Korea institute of electronic communication sciences
• /
• 제18권4호
• /
• pp.617-624
• /
• 2023

Recently, miniaturization and low power consumption of electronic products and improved efficiency and power factor improvement have become a matter of great interest. In this paper, an AC-DC converter based on PWM control was designed and made. The AC-DC converter is designed with a structure in which one rectifier circuit and one output voltage control circuit are connected in series. The rectifier circuit is a diode-based single phase full-wave current circuit and the output voltage control circuit is a DC-DC conversion circuit based on PWM control. Arduino was used as the main control device for PWM control, and LCD was configured at the output stage so that the control result could be checked. The error between the output voltage displayed on the oscilloscope and LCD and the target output voltage was confirmed through repeated experiments with the test circuit, and the validity of the proposed design methodology was confirmed by showing an error rate of about 5% based on the oscilloscope measurement value.

• Korean Journal of Computational Design and Engineering
• /
• 제9권4호
• /
• pp.416-424
• /
• 2004

In this paper, the heat transfer analysis and thermal stress analysis of the PCB(Printed Circuit Board) equipped in electronic Packages are carried out for various may types of chips on the PCB. And two structural PCB models are used in the analyses. The electronic chips on the PCB usually emit heat and this heat generates the thermal stress around the chip. The thermal load due to the heat generation of chips on the PCB may cause the malfunction of the electronic packages such as a monitor. a computer etc. Hence, the PCB should be designed to withstand these thermal loads. In this paper, the heat transfer analysis and thermal stress analysis are executed for the PCB model with pins and the analysis results are compared with the results for the PCB model without pins. The analysis results show that the PCB model without pins is not good for the thermal stress analysis of PCB, even though these two models have similar heat transfer characteristics. The analysis results also show that the highest thermal stress occurs in the pin especially attached to the highest temperature chip, and the PCB constrained to the electronic package on the long side is structurally more stable than other cases. The analyses of the PCB are executed using the finite element analysis code, NISA.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.541-544
• /
• 2004

This paper presents a new circuit panitioning algorithm using wire redundancy removal. This algorithm consist of the two steps. In the first step. We propose a new IIP(Iterative Improvement Partitioning) technique that selects the method to choice cells according to improvement status using two kinds of bucket structures, the one kept by total gain, and the other by updated gain. In the second step, we select the target wire in the cut-set. We add a alternative wire in the circuit to remove the target wire. For this we use wire redundancy removal and addition method The experimental results on MCNC benchmark circuits show improvement up to $41-50\%$ in cut-size over previous algorithms

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.805-808
• /
• 2005

In this study, the design of advanced LVDS(Low Voltage Differential Signaling) I/O interface circuit with new structural low triggering ESD(Electro-Static Discharge) protection circuit was investigated. Due to the differential transmission technique and low power consumption at same time. maximum transmission data ratio of designed LVDS transmitter was simulated to 5Gbps, Also, the LIGCSCR(Latch-up Immune Gate Coupled SCR)was designed. It consists of PLVTSCR (P-type Low Voltage Trigger SCR), control NMOS and RC network. The triggering voltage was simulated to 3.6V. And the latch-up characteristics were improved. Finally, we performed the layout high speed I/O interlace circuit with the low triggered ESD protection device in one-chip.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.393-396
• /
• 2004

This paper proposed a transfer function of a frequency-controlled resonant inverter for output power control. The inverter is modeled as an equivalent circuit by using Phasor transformation. A transfer function is derived from the equivalent circuit which contains cross-coupled nonlinear parts. By simulation of the circuit, the transfer function can be approximated as a linear first-order function. The proposed transfer function is verified through comparison of experimental and simulation results.