• 한국전기전자재료학회논문지
• /
• 제31권6호
• /
• pp.367-371
• /
• 2018

1,200 V class junction barrier schottky (JBS) diodes and schottky barrier diodes (SBD) were simultaneously fabricated on the same 4H-SiC wafer. The resulting diodes were characterized at temperatures from room temperature to 473 K and subsequently compared in terms of their respective I-V characteristics. The parameters deduced from the observed I-V measurements, including ideality factor and series resistance, indicate that, as the temperature increases, the threshold voltage decreases whereas the ideality factor and barrier height increase. As JBS diodes have both Schottky and PN junction structures, the proper depletion layer thickness, $R_{on}$, and electron mobility values must be determined in order to produce diodes with an effective barrier height. The comparison results showed that the JBS diodes exhibit a larger effective barrier height compared to the SBDs.

• 정보학연구
• /
• 제2권1호
• /
• pp.35-52
• /
• 1999

구매자와 공급자가 새로운 전자화폐를 통한 결제시스템의 도입에 있어 공급자의 과제는 전자화폐의 유용성에 대한 평가기준인 상업성, 안정성, 제한조건 등의 문제를 중심으로 살펴볼 필요가 있다. 사용자인 구매자와 상인이 안전한 결제시스템을 선택할 경우에 그들의 needs를 분석하여 활용해야 하며, 특히, 상업적 조건은 새로운 지불방식에서 필수적으로 고려되어져야 한다. 즉, 사용하기 편리하고 비용이 적게 들어야 함을 물론 다용도로 쓰일 수 있어야 한다. 이러한 사용자의 필요성의 충족 없이(즉, 보안기술의 확보 등)는 궁극적으로 사용자들로부터 외면 받게 될 수 있다. 이에 따라 사용자들에게 선택의 폭을 넓게 해 줌으로써 궁극적으로 전자상거래의 활성화에 이바지 할 것이다.

• 한국항행학회논문지
• /
• 제22권4호
• /
• pp.288-294
• /
• 2018

항공기의 엔터테인먼트 시스템은 고정된 모니터를 사용하는 대신에 승객 개인의 휴대용 전자기기를 사용하는 형태로 그 패러다임이 바뀌었다. 이로 인해 기내 설비는 간소해진 반면 휴대용 전자기기들의 전기 충전으로 안전에 대한 리스크는 증가되었다. 송신 기능이 없는 개인 휴대전자기기와 달리 와이파이 기능이 있는 전자기기(T-PED)의 사용이 허용되고 기내에서 배터리의 충전도 요구된다. 본 연구에서는 기내 무선 환경과 엔터테인먼트 서비스의 변화에 따른 영향을 조사하기 위해 NASA 항공안전보고시스템을 이용하여 기내 전자기기 사용 관련 자료를 분석하였다. 이를 기초로 하여, 항공기 안전관리 관점에서 비행 중에 발생된 객실 전자장비나 승객 휴대용 전자기기(특히 스마트폰)로 인한 이벤트 발생 사례를 공유하여 개인용 전자기기의 위험성을 분석하였다. 이러한 분석을 위해 잠재적 위해요인의 식별과 리스크 평가 작업이 수행되었으며, 최종적으로 휴대용 전자기기의 안전한 사용을 위한 리스크 완화 전략이 제시되었다.

• 한국기후변화학회지
• /
• 제5권4호
• /
• pp.331-338
• /
• 2014

The continued efforts to reduce GHG emission by international cooperation and each country are in progress. As part of these efforts, Korea's ETS is enforced in 2015. This was the time to make strategies for each company to respond Korea's ETS. This study was performed to suggest a draft of basic strategies for electronic component industry in current Korea's ETS stage are as follows; - Analyzing the nature of electronic component industry - Identifying needs for corresponding ETS of electronic component industry - Analyzing basic countermeasures for each stage of ETS - Suggesting drafts of basic strategies for electronic component industry in current Korea's ETS stage The result of this study, the current stage of Korea's ETS is moving from implementation of the scheme become determined and prepare the minimum corresponding to direct corresponding to the regulation and market change. Electronic component industry has many GHG emission growth(or change) factor, and it will be make electronic component industry as a buyer when Korea's ETS is enforced. Korea's ETS will be clearly act as a regulation rather than new business for electronic component industry. Therefore, identifying the Korea's ETS as a regulation is resonable strategy for corresponding the scheme. The basic strategies of electronic component industry th responding Korea's ETS are as follows; - Building internal organization and decision-making system before enforcement the Korea's ETS - Establishing internal basic corresponding strategies according to carbon price forecast scenarios - Considering the energy consumption and GHG emissions in design phase and preparing the global ETS market in mid or long term.

• 한국기록관리학회지
• /
• 제17권3호
• /
• pp.115-138
• /
• 2017

전자기록물의 유형은 다양해지고 있으며, 기능성이나 사용자와의 상호작용을 포함하며 여러 종류의 전자기록으로 구성된 기록물인 복합전자기록물들이 증가하고 있다. 복합전자기록물의 지속적인 접근을 보장하기 위해서는 아카이빙을 지원할 수 있는 메타데이터 구축이 필수적이다. 본 연구는 이러닝 콘텐츠인 복합전자기록물의 아카이빙을 위한 메타데이터 요소를 설계하여 제안하였다. 국내외의 장기보존을 위해 설계된 포맷 레지스트리의 구성요소를 비교 분석하여 디지털 아카이빙에 필수적인 공통 메타데이터 요소를 도출하고, 간호 분야 이러닝 콘텐츠의 보존 속성을 조사, 분석하여 이를 반영할 수 있도록 메타데이터 요소를 확장, 추가하였다. 분석결과를 통해 복합전자기록물 아카이빙을 지원하는 메타데이터 상위요소 25개와 138개의 하위요소가 제안되었다.

• Journal of Korean Dental Science
• /
• 제13권2호
• /
• pp.52-58
• /
• 2020

Purpose: Using two types of electronic apex locators, this study aimed to investigate the differences in accuracy according to the evaluator and equipment. Materials and Methods: Artificial teeth of the lower first premolars and two mandibular acrylic models (A and B) were used in this study. In the artificial teeth, the pulp chamber was opened and the access cavity was prepared. Using calibrated digital Vernier calipers, the distance from the top of the cavity and the root apex was measured to assess the actual distance between two artificial teeth. The evaluation was conducted by 20 dentists, and each evaluator repeated measurements for each electronic apex locator five times. The difference between the actual distance from the top of the cavity to the root apex and the distance measured using electronic measuring equipment was compared. For statistical analysis, the Friedman test the Mann-Whitney U-test were conducted and the differences between groups were analyzed (α=0.05). Result: As for the accuracy of measurement according to the two types of electronic apex locators, the value of the measurement error was 0.4753 mm in Dentaport ZX and 0.3321 mm in E-Cube Plus. Moreover, electronic apex locators Dentaport ZX and E-Cube Plus showed statistically significant differences (P<0.05). As for the difference in the accuracy of the two types of electronic apex locators according to the evaluator, the resulting values differed depending on the evaluator and showed a statistically significant difference (P<0.001). Conclusion: Electronic apex locator E-Cube Plus showed higher accuracy than did Dentaport ZX. Nevertheless, both types of electronic apex locators showed 100% accuracy in finding the region within root apex ±0.5 mm zone. Furthermore, according to the evaluator, the two electronic apex locators showed different resulting values.

• 한국전기전자재료학회논문지
• /
• 제35권2호
• /
• pp.178-183
• /
• 2022

For enhancing the flame-retardant properties of wallpapers, we developed an organic-inorganic hybrid solution with ZrSiO₄ as a functional ceramic powder, coated on non-woven fabric using dip coating, spray coating, and slot-die coating methods. Their flame retardant properties were characterized by a 45° combustion tester, which is manufactured according to the flame-retardant performance standard (KOFEIS 1001 and KS F 2819). In organic-inorganic hybrid solution, with increasing the concentration of acid-catalyst (acetic acid), the precipitation of ZrSiO₄ powders increased, and the flame retardant properties decreased. The highest flame retardant result was obtained for the solution adding 5 wt% acetic acid. The optimization of the coating method and coating number resulted in the most excellent flame-retardant properties being obtained for the non-woven fabric coated for 5 or 7 times by dip coating method, and their flame-retardant properties corresponded to class 2 flame-retardant performance of wallpapers.

• 반도체디스플레이기술학회지
• /
• 제23권1호
• /
• pp.84-87
• /
• 2024

A water sterilization system is developed utilizing a 275 nm-wavelength LED light source equipped with a TIR lens. The system's light source is constructed by combining a 275 nm-wavelength UVC LED, known for its germicidal properties, with a TIR lens having a direction angle of 6.8 degrees. The optical simulation software 'LightTools' is employed to design and optimize the intensity of deep ultraviolet sterilizing light irradiation, its distribution, and sterilization capacity. In the inactivation experiment with E. coli, the water sterilizer system achieved a sterilization rate of 78.92 % while maintaining a water flow capacity of 50 L/min. Compared to the conventional mercury lamp light source water sterilizer system, the UVC LED water sterilizer system addresses environmental concerns related to mercury usage and offers advantages in terms of lifespan and durability.

• 한국전자거래학회지
• /
• 제1권1호
• /
• pp.195-207
• /
• 1996

It is required the electronic commerce system for satisfying the various information needs of user groups on the high speed communication networking. However, its information amounts will be explosive, and make it difficult for users to locate information they are interested in. Therefore we have developed the architecture of information searching platform for electronic commerce which searches and gathers information about electronic commerce site on internet and builds the keywords index database for serving the client's requests in order to provide non-professionals and small companies etc., with access easily to retrieval information.

• ETRI Journal
• /
• 제31권3호
• /
• pp.339-341
• /
• 2009

Built-in redundancy analysis (BIRA) is widely used to enhance the yield of embedded memories. In this letter, a new BIRA method for both high repair efficiency and small hardware overhead is presented. The proposed method performs redundancy analysis operations using the spare mapping registers with a covered fault list. Experimental results demonstrate the superiority of the proposed method compared to previous works.