• Journal of Astronomy and Space Sciences
• /
• v.19 no.4
• /
• pp.305-318
• /
• 2002

We have constructed two flight models of airglow photometer system (AGP) to be onboard Korea Sounding Rocket-III (KSR-III) for detection of MUV dayglow above the Korean peninsular. The AGP system is designed to detect dayglow emissions of OI 2972${\AA}$, $N_2$ VK(0,6) 2780${\AA}$, $N_2$ 2PG 3150${\AA}$ and background 3070${\AA}$ toward the horizon at altitudes between 100 km and 300 km. The AGP system consists of a photometer body, a baffle an electronic control unit and a battery unit. The MUV dayglow emissions enter through a narrow band interference filter and focusing lens of the photometer, which contains an ultraviolet sensitive photomultiplier tube. The photometer is equipped with an in-flight calibration light source on a circular plane that will rotate at the rocket's apogee. A bane tube is installed at the entry of the photometer in order to block strong scattering lights from the lower atmosphere. We have carried out laboratory measurements of sensitivity and in-flight calibration light source for the AGP flight models. Although absolute sensitivities of the AGP flight models could not be determined in the country, relative sensitivities among channels are well measured so that observation data during rocket flight in the future can be analyzed with confidence.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.2
• /
• pp.3-8
• /
• 2009

The traction system has been mainly used for rehabilitation and correction of patients with spine or gait diseases in orthopedics or at home. Some problems could occur in human body when patients forced their training using the traction system. So it needs to measure a traction force and control the training time. However, most of products on market have no sensor measuring traction force. Thus we designed and made a sensor detecting traction force using strain gauge, amplifier for transition to output signal and experiment devices for performance test. We carried out experiment of a sensor detecting a traction force and measured electric responses of it with respect to traction loads. Maximum error was within about 1% for experiments in static condition and the average error was about 0.7% for experiments in dynamic condition. We concluded that it is possible to use the developed sensor for measurement of traction force since the maximum output variation of a sensor detecting a traction force was about 0.3% in $0^{\circ}C-60^{\circ}C$ temperature condition.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.323-330
• /
• 2020

This paper proposes the road roughness based Braking Pressure Calculation System(BPCS) for an Autonomous Vehicle Stability. The system consists of an image normalization module that processes the front image of a vehicle to fit the input of the random forest, a Random Forest based Road Roughness Classification Module that distinguish the roughness of the road on which the vehicle is travelling by using the weather information and the front image of a vehicle as an input, and a brake pressure control module that modifies a friction coefficient applied to the vehicle according to the road roughness and determines the braking strength to maintain optimal driving according to a vehicle ahead. To verify the efficiency of the BPCS experiment was conducted with a random forest model. The result of the experiment shows that the accuracy of the random forest model was about 2% higher than that of the SVM, and that 7 features should be bagged to make an accurate random forest model. Therefore, the BPCS satisfies both real-time and accuracy in situations where the vehicle needs to brake.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.412-418
• /
• 2020

This paper produced an automatic fluid management system that can accurately control the specific gravity of etching solution(FeCl₃), and produced a SUS MASK applied to OLED. The target was set at 0.4 mm in diameter of the hole. As a result of this misconception, the etching speed increased when the specific gravity(S.G) value of FeCl₃ was changed from 1.43 to 1.49. And when the weight was 1.49, it was found that the vertical diameter was 0.405 mm, approaching the target. When pressure injection was varied from 2.0kg/cm2 to 3.5kg/cm2, the hole diameter at 3.0 kg/cm2 averaged 0.4mm, matching the target. The characteristics of the change in gravity were analyzed by applying the additive 1.2% and setting the weight at 1.430 by mixing HCl and H2O in FeCl₃ and fixing the injection pressure at 3.0 kg/cm2. When the weight changed from 1.460 to 1.469 the etching speed increased from 0.564 to 0.540. When the weight was 1.467, the hole diameter was measured at 0.4 mm and the target was reached.

• Journal of Navigation and Port Research
• /
• v.33 no.1
• /
• pp.57-63
• /
• 2009

In order to effectively isolate the marine wastes with an effluent standard, the pretreatment process is required to isolate solid materials from the liquid-solid mixed wastes. The more effective the pretreatment becomes, the more processing capacity of posttreatment will be improved and process facilities will be downsized. In this paper, we suggested the vibrating reverse-slant screen, investigated the optimal vibration frequency and vibrator installation angle for the separation of the liquid solid mixed wastes. Several experiments for separation efficiency were conducted under the condition of various vibration frequency($35{\sim}60Hz$, 5Hz interval) and vibrator angle($0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $90^{\circ}$) considering the crack of screen. The screen inclination angle is set up the gradient as $3^{\circ}{\sim}5^{\circ}$ through the preliminary experiments. Also, we made two types of screen(respectively rectangle and square screen). The separation device has shown the optimum efficiency at vibrator angle $0^{\circ}$ and vibration frequency 60Hz, and has no relation with the shape of screen. And the proposed technology is verified by comparing with quantity of suspended solids before and after filtration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1375-1380
• /
• 2015

Nowadays, the technique to deal with the waste gas of perfluorinated compounds using plasma has been developed. As the effective decomposition techniques at many research centers and companies were investigated at home and abroad, the products have been improved with various methods. This study aims to guess the distributions of pressure and temperature through the thermal and fluid analyses inside the decomposition equipment model of waste gas. As the analysis result, the maximum pressure and the minimum pressure are 0.975Pa and -1.037Pa individually on the whole. It is shown that the pressure of air decreases gradually as the air flows from inlet to plane 1 and the pressure increases as the air flows from plane 1 to outlet. And the maximum temperature and the mimum temperature are $1718^{\circ}C$와 $26.07^{\circ}C$ individually on the whole. It is shown that the temperature of air increases gradually as the air flows from inlet to plane 4 and the temperature decreases as the air flows until outlet. It is thought that the data necessary to develop the real system can be applied by using the thermal and fluid analyses.

• Resources Recycling
• /
• v.22 no.3
• /
• pp.91-99
• /
• 2013

Steel industry which has been accomplishes the base of our country economy, automobile and electronic industry are taking charge of the role, whose electroplating is important. Large amount of wastewater and various metal salts, including hazardous materials was generated from the electroplating pre-treatment, plating, washing and post-plating. Currently, the general wastewater follows in the environmental law and neutralization after controlling, sludge where the various metal is mixed reclaims below multiple regulative and trust it is controlling. The sludge which includes the gas price metal reclaims in the field and trust it controls. a reclamation price of land it is insufficient but and the control expense holds plentifully and it loses the gas price metal which is valuable. Consequently, The research regarding to recover a gas price metal actively from this waste water, it is advanced. A new method to recover valuable metals from electroplating wastewater synthesis of metal sulfides using topical methods utilizing iron oxidizing bacteria, reagent of sulfides and solvent extraction using an organic solvent, such as the development of the law to recover these metals and metal sulfides of wastewater using selective recovery have been studied. By using these wastewater treatment method under frequency above 95%, it has been obtained the valuable metal from the wastewater, where the metal ion of Fe, Cu, Zn and Ni complexes was mixed. As we discuss the wastewater, which has been discharged from electroplating process, it is important and will be applied to the resources of metal in the urban mine.

• Korean Security Journal
• /
• no.29
• /
• pp.223-249
• /
• 2011

In modern society, citizens' quality of life aspects of safety and crime prevention activities are actively considering the incidence of crime prevention in advance. It also can be quite important elicit the interest of who community members through effective crime prevention strategies. For crime prevention policies and techniques over time as more scientific and advanced methods are made. Today, A typical crime prevention strategies is private security zones and Crime Prevention Through Environmental Design (CPTED) is a corresponding to the new strategy. CPTED is a diversification can be called a crime prevention approach that emphasizes the principle of natural surveillance, access control, territoriality, activity support, maintenance and management. The defensible space of the space area related to crime prevention setting the activities of private security and CPTED determine. Also, the reality of crime prevention and protection should be considered space. The emphasis on proactive prevention of crime in modern society for the prevention of crime how to approach differing perspectives and disparate aspects of private security and CPTED. Technical and professional areas that overlap to some extent in a homogeneous aspect. Ultimately, CPTED is a crime prevention through space and environmental approach for crime. In addition, Ultimate goal of convergence, crime prevention, with the same or higher is required to study for the area after looking for the characteristics and limitations of private security and CPTED.

• The Journal of Pediatrics of Korean Medicine
• /
• v.31 no.1
• /
• pp.25-42
• /
• 2017

Objectives The goal of this review was to investigate clinical, experimental and literature studies of Korean medicine on atopic dermatitis (AD) of Korean children in Korean medicine literature, seeking for the better research methods for more effective treatments. Methods Electronic investigations were practiced on AKOP (The Association of Korean Oriental Pediatrics, http://www.akop.or.kr) to collect theses which were published by J Pediatr Korean Med. The key word 'Atopy' was used for searching to ensure that every related thesis was collected. The publication date was limited from 1996 to 2016. The selected literatures were assessed mainly according to distributions of study type, publication year, scale, treatment and its efficacy. Results 55 papers were selected from 59 studies. In these collected 55 related theses, there were 29 experimental studies (52.73%), 18 clinical studies (32.73%), 8 review studies (14.55%). In the 29 experimental studies, there were 20 studies (68.97%) using NC/Nga mouse as subjects. The mite antigen was used to trigger AD by 8 studies (27.59%). The studies have been utilizing DNCB and DNFB instead of mite antigen since 2011. All the experimental studies showed that the Korean medicine was effective in AD. In total 18 clinical studies, 3 studies (16.67%) were case reports, only 1 thesis (5.56%) was conducted by case control study and the rest were case series studies. 7 studies (38.89%) of 18 studies diagnosed AD according to Hanifin and Rajka's diagnostic criteria (1980), only 1 study (5.56%) according to the Korean standard and the rest 10 studies (55.56%) didn't mention diagnostic criteria. 12 clinical studies (66.67%) showed efficacy in treating AD. There were 10 studies (55.56%) only employing internal treatments and 1 thesis (5.56%) didn't mention the exact prescription. Naesowhajungtang-kamibang, Saenghyeoryunbue-um were used 3 times (16.67%) as the internal medicine respectively. 5 theses (27.78%) were combined with acupuncture therapy. Hegu (LI4), Sanyinjiao (SP6) were used in 4 theses, and Taichong (LR3), Quchi (LI11), Zusanli (ST36) in 3 theses. The number of acupoints chosen from The Spleen meridian of Foot-Taiyin was the largest. There were 8 review theses. 2 were about the foreign oriental medicine, 3 were about the external medicine or external treatment methods, and 3 other studies were about severity scoring systems, the methodological study in the latest clinical study, overview for pattern and results of herbal medicine-derived AD clinical researches. Conclusions The experimental studies and clinical studies showed the effectiveness of Korean medicine treatments. However, this study still needs improving by conducting more comparative studies and using better research methods, in order to find more effective treatments to improve clinical efficacy.

• Food Science of Animal Resources
• /
• v.32 no.4
• /
• pp.467-475
• /
• 2012

This study was carried out to investigate the effect of the addition level (0 ppm, 400 ppm, 800 ppm, and 1,200 ppm) of green tea extract on the lactic acid bacteria, oxidative stability, and aroma in kimchi-fermented sausage. The sample sausages were fermented at $24^{\circ}C/RH$ 89% until attained to a pH value of 4.9 (for 17 h), and then dried at $10^{\circ}C/RH$ 75-80% for 6 d. The lactic acid bacteria count and pH value were 7.5-7.7 Log CFU/g sausage and 4.30-4.33, respectively, at 6 d of ripening. The results of those did not show significant differences among all treatments. The formation of TBARS (2-thiobarbituric acid reactive substances) was significantly lowered by increasing the addition level of green tea extract. During ripening periods, the CIE $L^*$ and $a^*$ values decreased; however, the $b^*$ value increased due to the addition of green tea extract. Utilizing an electric nose, the aroma pattern was clearly discriminated between green tea extract treatments and the control. Therefore, in kimchi-fermented sausages, the high addition level of green tea extract improved the lipid oxidation stability. In addition, regardless of the addition level, green tea extract changed the aroma while reducing the color stability. Moreover, it did not have any effect on the growth of lactic acid bacteria.