The Journal of Korea Institute of Information, Electronics, and Communication Technology (한국정보전자통신기술학회논문지)

Korea Information Electronic Communication Technology (한국정보전자통신기술학회)
권호 표지
DOI QR코드

DOI QR Code

A Stdudy on SUS MASK Etching using of FeCl3

FeCl3를 이용한 SUS MASK 에칭에 관한 연구

  • Lee, Woo-Sik (Department of Chemical & Biological Engineering, Gachon University)
  • Received : 2020.10.03
  • Accepted : 2020.10.22
  • Published : 2020.10.30
Download PDF
⟨ Previous Next ⟩

Abstract

This paper produced an automatic fluid management system that can accurately control the specific gravity of etching solution(FeCl3), and produced a SUS MASK applied to OLED. The target was set at 0.4 mm in diameter of the hole. As a result of this misconception, the etching speed increased when the specific gravity(S.G) value of FeCl3 was changed from 1.43 to 1.49. And when the weight was 1.49, it was found that the vertical diameter was 0.405 mm, approaching the target. When pressure injection was varied from 2.0kg/cm2 to 3.5kg/cm2, the hole diameter at 3.0 kg/cm2 averaged 0.4mm, matching the target. The characteristics of the change in gravity were analyzed by applying the additive 1.2% and setting the weight at 1.430 by mixing HCl and H2O in FeCl3 and fixing the injection pressure at 3.0 kg/cm2. When the weight changed from 1.460 to 1.469 the etching speed increased from 0.564 to 0.540. When the weight was 1.467, the hole diameter was measured at 0.4 mm and the target was reached.

본 논문은 에칭액(FeCl3)의 비중을 정확히 제어할 수 있는 자동 액 관리시스템을 제작하여 OLED에 적용되는 SUS MASK 제작하였다. 그리고 홀 직경을 0.4 mm로 목표치를 정하였다. 본 실혐 결과, FeCl3의 비중(S.G) 값을 1.43에서 1.49까지 변화를 주었을때 에칭 속도는 빨라졌다. 그리고 비중이 1.49일 때, 홀직경이 0.405 mm로의 목표치에 접근한 것을 알 수가 있었다. 압력분사를 2.0 kg/cm2~3.5 kg/cm2까지 변화를 주었을 때 3.0 kg/cm2에서 홀 직경은 평균 0.4 mm로 목표치와 일치하였다. FeCl3에 HCl과 H2O을 혼합하여 비중을 1.430으로 설정하고 분사 압력을 3.0 kg/cm2으로 고정시키고 첨가제를 1.2%로 적용하여 비중 변화에 따른 특성을 분석하였다. 비중을 1.460 ~ 1.469까지 변화주었을 때 비중이 증가할수록 에칭속도는 0.564에서 0.540으로 빨라졌다. 그리고 비중이 1.467일 때 홀 직경이 0.4 mm로 측정되어 목표치에 도달하였다.

Keywords

References

  1. D. W. Kim, I. J. Park, G. H. Kim, B. M. Chae, S. W. Lee, H. L. Choi, H. C. Jung, "Oxidation Process for the Etching Solution Regeneration of Ferric Chloride Using Liquid and Solid Oxidizing Agent", Clean Technol, Vol. 23, No. 2, pp.158-162, 2017 https://doi.org/10.7464/ksct.2017.23.2.158
  2. W. S. Choi, H. Y. Kim, J. W. Jeon, W. S. Chang, S. H. Cho, "Vibration-Assisted Femtosecond Laser Drilling with Controllable Taper Angles for AMOLED Fine Metal Mask Fabrication", Materials, Vol. 10, pp.212-220, 2017 https://doi.org/10.3390/ma10020212
  3. Y. Ito, M. Ueki, T. Kizaki, N.S ugita, M. Mitsuishi, "Precision cutting of glass by laser-assisted machining", Procedia Manuf, Vol. 7, pp.240-245, 2016 https://doi.org/10.1016/j.promfg.2016.12.058
  4. M. R. Park, Y. W. Kim, J. H. Park, C. H. Park, "Separation of Iron and Nickel from Heavily Concentrated Aqueous", Clean Tech., Vol. 13, No. 4, pp.274-280, 2007
  5. M. M. Heravi, F. K. Behbahani, M. Daraie, H. A. Oskooie, "Fe(ClO4)3${\cdot}$ 6H2O: A mild and efficient catalyst for one-pot three component synthesis of ${\beta}$-acetamido carbonyl compounds under solvent-free conditions", Molecular Diversity, Vol. 13, No 3, pp.375-378. 2009 https://doi.org/10.1007/s11030-009-9118-z
  6. I. J. Park, B. Swanin, D. W. Kim, G. H. Kim, D. H. Han, H. C. Jung, "Preparation of mickel nanoparticles using nickel raffinate separated by solvent extraction from sepent FeCl3 etching solution arch", Metall. Mater, Vol. 64, No 2, pp. 531-534, 2019
  7. E. Najafi and F. K. Behbahani, "Three Component Synthesis of 3-Diarylmethy indoles Using Fe(ClO4)3/SiO2 as Catalystl", ussian Journal of Organic Chemistry, Vol. 53, No. 3, pp.454-458, 2017
  8. S. Tao, B. Wu, S. Lei, "A comparative study of the interaction between microhole sidewall and the plasma generated by nanosecond and femtosecond laser ablation of deep microholes", J. anuf. Process, Vol. 14, pp.233-242. 2012
  9. W. T. Kwon, L. S. Kwon, W. S. Lee, "The Development of New Cost-Effective Optimization Technology for OLED Market Entry", Journal of Distribution Science Vol. 17, No. 4, pp.51-57, 2019 https://doi.org/10.15722/JDS.17.4.201904.51
  10. Y. W. Kim, M. R. Park, H. M. Lee, G. H. Park, C. H. Park, "Effect of Fe(ClO4)3 Addition in the Aqueous Ferric Chloride Etchant on the Increase of Shadow Mask Etch Rate", ,Korean Chem. Eng. Res, Vol. 48, No. 2, pp. 157-163, 2010