• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권4호
• /
• pp.180-183
• /
• 2004

This paper presents a description of the point collocation method and its application to the electromagnetic field computation. The interpolation scheme is based on the fast moving least square reproducing kernel approximation. In the method, the integration cell is not required and the essential boundary conditions can be enforced directly. Numerical simulations on 1-D and 2-D problems are carried out to validate the method. It is found that computational efficiency is higher than the general mesh-free methods.

• 전자공학회논문지A
• /
• 제29A권11호
• /
• pp.19-24
• /
• 1992

In this paper, a high frequency method is developed which combines the uniform Geometrical Theory of Diffraction(GTD) and the Aperture Integration(AI) to analyze electromagnetic plane wave scattering by a perfectly-conducting, open-ended, semi-infinite parallel plate waveguide with a uniform layer of absorbing material on its inner wall, and with a slanted planar termination inside. In this method, first, the field of an arbitary point inside the paraller plate waveguide is computed by the GTD. Second, the field scattered into exterior region by the waveguide is found using the equivalent current, which can be obtaind from the aperture field of the waveguide and using the AI. Numerical results based on this GTD method are presented and compared with those based on the mode matching method.

• 전자공학회논문지A
• /
• 제32A권11호
• /
• pp.1-7
• /
• 1995

The problem of amplitude-and frequency-modulated waveforms is analyzed when a linearly polarized electromagnetic wave is scattered by a slowly rotating rotor with metal plates. ECM in conjunction with a quasi-stationary method is used to analyze the modulated waveforms. The modulated waveforms depend on the orientation and dimension of the object. its rotation speed, and very strongly on the incident and scattering directions. The modulate waveforms of a rotating non-skewed metal plate and a rotor with two blades are functions of twice the rotating frequency of those. Similar results are discussed for a rotating skewed metal plate, but the modulated waveforms is a function of the rotating frequency. Numerical results based on our ECM are presented and compared with those of Sikta's and PO solution.

• 한국전자파학회지:전자파기술
• /
• 제3권2호
• /
• pp.16-21
• /
• 1992

플란지 평해도파관에 의한 TE-모드의 산란 및 수신을 해석한다. 푸리에 변환을 이요하여 주파수 영역에서 산란파를 표시하여, 경계조건을 사용하여 산란파의 점근해를 구하였다. 수치해석을 통하여 산란특성을 조사하였다.

• Journal of electromagnetic engineering and science
• /
• 제4권4호
• /
• pp.175-182
• /
• 2004

When the M-ary signal experiences the Rayleigh fading, the diversity schemes can reduce the effect of fading since the probability that all the signals components will fade simultaneously is reduced considerably. The symbol error probabilities for various M-ary signals, such as MDPSK(M-ary DPSK) and MPSK(M-ary PSK), are mathematically derived for the Selection Combining 2(SC-2) and Selection Combining 3(SC-3) demodulation system which requires a less complex receiver than Maximum Ratio Combining(MRC). The propagation model used in this paper is the frequency-nonselective slow Rayleigh fading channel corrupted by the Additive White Gaussian Noise(AWGN). The numerical results presented in this paper are expected to provide information for the design of radio system using M-ary modulation method for above mentioned channel environment.

• 한국전자파학회논문지
• /
• 제12권6호
• /
• pp.912-918
• /
• 2001

본 논문에서는 광대역 WLL신호환경에서 동작하는 스마트 안테나 시스템의 역방향 채널에서의 시스템 성능분석을 제시하였다. 이 논문에 보여지는 모든 결과는 현재 상용화 된 단말기로부터 수신한 실제 데이터로부터 얻어졌다. 웨이트 벡터로부터 계산되어진 빔패턴과 BER(Bit Error Rate)은 실내와 실외 환경 실험에서 관찰되었다. 실험의 결과로, 제안되어진 스마트 안테나 시스템은 실외와 실내 신호 환경 모두에서 향상된 성능을 제공한다는 결론을 얻었다.

• 한국전자파학회논문지
• /
• 제13권4호
• /
• pp.401-406
• /
• 2002

마이크로스트립 다층 구조 회로가 MMIC 분야에서 다양하게 적용되고 있다. 이에 따라 서로 다른 높이를 갖는 유전체 층 사이의 효율적인 마이크로스트립 선로 전송을 위해 3차원 계단형 불연속을 갖는 선로에서의 정확한 전달 특성 해석, 등가회로의 유도가 요구된다. 본 연구에서는 FDTD 수치해석 방법과 측정을 통해 얻어진 불연속면의 5 파라미터를 이용하여 T 형 등가회로와 소자 값들을 유도하였으며, 해석 및 측정 결과는 1~5 ㎓ 범위에서 잘 일치함을 확인할 수 있었다.

• 한국전자파학회논문지
• /
• 제8권3호
• /
• pp.297-309
• /
• 1997

In this paper, A small inverted F Antenna with 1.9 GHz frequency band is studied theoretically, characterized by numerical analysis with computer and fabricated in order to use in the proximity sensor. Because of small space for antenna in proximity sensor, .lambda. /4 length plate and dielectric material are used to reduce the size of antenna and broaden the bandwidth. Finite ground body's affection is compensated by dielectric top loading effect which strengthen front direction power about 4 dB. Fabricated antenna is measured and the result is that resonant frequency is 1900.05 MHz, VSWR is 1.02, bandwidth is 194 MHz and input impedance is 50.45-j0.108 [ .ohm. ].

• 한국전자파학회논문지
• /
• 제13권5호
• /
• pp.407-415
• /
• 2002

본 논문에서는 무인항공기에 탑재된 서로 다른 주파수에서 동작하는 안테나간의 상호결합을 계산하여 안테나의 효율적인 배치방법을 제안한다. FDTD 기법을 이용하여 계산하였다. 시뮬레이션 파라미터는 안테나간의 거리, 안테나간의 높이차, 접지구조 등으로 제한하였다. 시뮬레이션 결과의 정확도를 검증하기 위해 다른 수치 해석 기법을 이용한 해석결과와 비교하였다. 안테나간의 상대적인 높이차가 안테나 상호결합에 가장 큰 영향을 주는 요인으로 나타났다.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권8호
• /
• pp.783-788
• /
• 1996

In this paper, the high-$T_c$ , superconductor (HTS) microstrip patch antenna which is directly coupled to a microstrip transmission line is designed and the numerical solution which evaluate near electromagnetic field of HTS antenna is presented. This solution uses the interpolation function with the vector edge triangular element. The advantage of this element is the elimination of spurious solutions attributed to the lack of enforcement of the divergence condition. The results of this method have a good agreement with $TM_10$ mode in HTS microstrip patch antenna and show that the computation of resonant length considering the fringing capacitance effect at radiating edge are proper.