• Journal of Magnetics
• /
• 제18권3호
• /
• pp.260-267
• /
• 2013

In this paper a general 2-D model of a large air-gap synchronous machine either with non-magnetic or magnetic core rotor is investigated and electrical characteristics of the machine are analytically calculated. Considering the general model, analytical equations for magnetic field density in different regions of the large air-gap machine are calculated. In addition, self and mutual inductances in the proposed model of the machine have been developed, which are the most important parameters in the electromagnetic design and transient analysis of synchronous machines. Finite element simulation has also been performed to verify the obtained results from the equations. Analytical results show good agreement with FEM results.

• Journal of Electrical Engineering and Technology
• /
• 제4권3호
• /
• pp.377-381
• /
• 2009

In the development of an interior permanent magnet synchronous machine (IPMSM) for high-speed operation, the problem of mechanical stress of the rotor by centrifugal force becomes more essential as the speed and size of the machines increase. In this paper, the optimal design process combined with mechanical stress analysis was presented. In the analysis of mechanical stress, the node and element data obtained by the electromagnetic field analysis program are also used in the stress analysis. Therefore, the different pre-processing for the stress analysis program is no longer required. Therefore, the computing time of the new method is very short compared with the conventional approach, and when repeated analyzes of various models are required, this method is very useful. The validity of our methods was verified by comparing simulation results with conventional and experimental data.

• 전기학회논문지P
• /
• 제65권1호
• /
• pp.13-17
• /
• 2016

EMC (Electro Magnetic Compatibility) of the electrical railway must be ensured for safety of passenger. Maglev trains has not friction between the wheels and the rails because levitation by an permanent magnets, electromagnets and superconducting magnets etc. So, it is advantageous to maintain a high speed without noise and vibrations. In this paper, we investigated that the magnetic field of the before and after installation electromagnetic waves absorber in order to analyze the effects of electromagnetic waves. The theoretical analysis of the electromagnetic wave absorber was simulated using finite element method. The magnetic field properties of electromagnetic waves absorber were measured by EMI (Electro Magnetic Interference) test receiver.

• 한국철도학회논문집
• /
• 제19권3호
• /
• pp.324-330
• /
• 2016

전자접촉기는 전기 회로에 사용하는 개폐기 중 하나로 산업계 전반에 걸쳐서 폭 넓게 사용되고 있다. 이 전자접촉기의 구동부인 전자코일은 전기 회로를 개폐하는 역할을 맡고 있고 전자접촉기의 동작 성능에 중요한 역할을 한다. 이 논문은 유한요소법을 이용하여 실험데이터를 반영한 해석 모델을 구현하였으며 인가전압과 권선수의 변화에 대한 전자기력의 특성 확인을 통해 해석 모델을 검증하였다. 두 전자코일의 구동 코어와 고정 코어의 접촉부 변화에 따른 전자기력의 특성을 연구하였다. Push형 솔레노이드 구조의 전자코일에서 두 코어 접촉부의 기울기에 따른 구조의 전자기력 특성을 접촉부의 자속밀도 분포를 통해 해석하였다. 또한 접촉부 사이 air gap의 변화에 의한 구조가 자속밀도 분포에 미치는 영향을 파악하였다. 이를 통하여 전자코일의 코어 접촉면에 따른 전자기력의 특성을 연구하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.702-704
• /
• 2003

In this paper, analysis of bobbin probe signal in steam generator tube with bulge defect on CE system 80 nuclear power plant is represented. The CE system 80 steam generator is adopted in ULJIN-4 nuclear power plant. From Maxwell's equation, the electromagnetic governing equation for eddy current problem is derived and by performing the finite element formulation the 3-dimensional finite element code with brick element is developed. For the ease of the comparison the numerical results with experimental ones, the calculated signals are adjusted by using the ASME standard 100[%] through hole signal. For analysis of the effect of variation of the bulge depth on the impedance signal 0.2[mm] and 0.4[mm] depth of bulge defect signals are calculated and analyzed. As the depth of the bulge defect is increased, the magnitude of the signal is increased, too. But the rate of the increment of the signal is less than that of the depth of defect. From the result of this paper, we can obtained the information of the effect of bulge defect on the impedance signal.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.318-327
• /
• 2010

This paper deals with analysis on dynamic characteristic and circuit parameter of linear switched reluctance motor by electromagnetic analytical method. Above all, using space harmonic method, which is electromagnetic method, the air-gap flux density is analyzed in the both align and unaign positions, and the inductance profile, force characteristic and resistance per phase are calculated by means of the process. The validity of the analyzed results are demonstrated by the finite element method(FEM) and manufacture of the prototype machine. Second, the dynamic simulation is analyzed by the use of circuit parameters derived from analytical method, and the operating system of the prototype machine is manufactured to demonstrated the validity of simulation analysis. As a result, it is considered that the characteristic equation suggested in this paper will contribute to the design, analysis and application of LSRM.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.1020-1023
• /
• 2005

The fluid flow and thermal analysis were carried out by using the finite element program, Ansys. In analysis process, a electromagnetic analysis was accomplished. In afterwards, Fluid and thermal analysis was done. Fluid flow and heat could be produced by electromagnetic pump. In other words, A magnetic field which electromagnetic pump generates influences Liquid Material(Al alloy). This paper calculates the fluid flow and temperature distribution according to time. Using material is Al alloy(A356).

• 전기학회논문지P
• /
• 제62권2호
• /
• pp.72-78
• /
• 2013

In this study, samples from the site where there occurred unbalanced current when cable routing were analyzed, and the simulation program for electric power system analysis, PSCAD/EMTDC, was used to calculate the current unbalance on cable routing. Based on electromagnetic finite element analysis(FEA), electromagnetic parameters enabled the interlocking with COMSOL for the calculation of allowable current ampacity and magnetic filed distribution. This then led to modeling unbalanced current between common modes using the unbalanced current analysis program, thereby comparing and discussing the results from both. The analyzed model is a common mode 2 parallel circuit, which is a basic model for cable routing, and by arranging cables in various ways, the arrangement with the least current unbalance was suggested, which would, in the future, prevent earth faults and extend life for the whole cable.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권4호
• /
• pp.163-173
• /
• 2005

The conventional optimization study for electromagnetic systems has been mostly on the shape or size optimization. The goal for these optimization methods is to improve performance of electromagnetic systems by optimizing the interface shape of two different materials while their given layout or initial topology are held. The feasible topology can be diverse and an appropriate topology will give much better design results. In this paper we propose a theory and an algorithm for topology optimization of electromagnetic systems, which are based on the finite element method. The topology optimization technique employes a direct searching method of sensitivity analysis in which the information of material sensitivity is used. Two numerical examples of a switched reluctance motor and an electrostatic actuator of MEMS are tested and their design results show that the optimization method is valid and useful for the topology and basic layout design of electromagnetic systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.78-81
• /
• 1990

The Engquist-Majdas second-order Absorbing Boundary Conditions (ABC) has been combined with the finite element formulation replacing the boundary integral equations in the hybrid finite-boundary element method (HEM). The method is applied to electromagnetic field radiation problems, especially to the microwave launcher, in order to verify the finite element formulation with the ABC's. The results with ABC are in good agreement with those of HEM. In order to see the applicability of the ABC, a simplified microwave oven utilizing ABC and an absorbing material are provided. The EM field distribution of the model is visualized. This method could be a useful analysis and design tool for EM field devices.