• Transactions on Electrical and Electronic Materials
• /
• 제14권1호
• /
• pp.28-31
• /
• 2013

A volcano shaped gated Si-FEA (silicon field emitter array) was simply fabricated using sputtering as a gate electrode deposition and lift-off for the removal of the oxide mask, respectively. Due to the limited step coverage of well-controlled sputtering and the high aspect ratio in Si dry etch caused by high RF power, it was possible to obtain Si FEAs with a stable volcano shaped gate structure and to realize the restriction of gate leakage current in field emission characteristics. For 100 tip arrays and 625 tip arrays, gate leakage currents were restricted to less than 1% of the anode current in spite of the volcano-shaped gate structure. It was also possible to keep the emitters stable without any failure between the Si cathode and gate electrode in field emission for a long time.

• 한국정보통신학회논문지
• /
• 제7권4호
• /
• pp.725-729
• /
• 2003

본 논문에서는 LCD 후면 광원용 한 쌍의 형광층, 방전용기 및 대향전극을 갖는 무수은 평판형광램프에 대하여 연구하였다. 구동 전압이 인가되면 균일한 방전이 램프 전체에 걸쳐서 발생한다. 방전개시전압은 가스 압력에 따라 증가한다. 이와 같은 경향은 방전 가스 압력의 증가에 의한 평균자유행정의 감소에 기인된 것으로 생각된다. 녹색 발광 평판형광램프에서 최대 2700[cd/m2]의 휘도를 얻었다.

• 전기학회논문지
• /
• 제60권5호
• /
• pp.993-998
• /
• 2011

In this paper we suggest new criteria for the classification of the electrode gap between common and scan electrodes. The electrode gap is categorized as a short, middle, and long gap according to the criteria. Among these structures, we focus on the erase waveform of a mid-gap structure. we report an unstable discharge arising from the erase ramp period in a mid-gap structure. Based on the Vt close curve, we analyze the unstable discharge at various conditions. Our analysis reveals that the unstable discharge is ignited between surface electrodes and caused by un-erased wall charges accumulated on the outer edges of electrodes. By reducing the voltage level of the last sustain pulse, the problem is solved.

• 통합자연과학논문집
• /
• 제2권1호
• /
• pp.41-44
• /
• 2009

Photonic crystals containing multiple rugate structure are prepared by electrochemical etchings. Typically etched rugate PSi prepared in this study. Etching is carried out in a Teflon cell by using a two-electrode configuration with a Pt mesh counter electrode. They exhibit sharp photonic band gaps in the optical reflectivity spectrum. This reflectivity can be tuned to appear anywhere in the visible to near-infrared spectral range, depending on the programmed etch waveform. We study the method of full width half maxima and reflectivity index control by using amplitude.

• 한국세라믹학회지
• /
• 제37권6호
• /
• pp.552-558
• /
• 2000

LiMn2O4 thin fiolm cathodes for Li-ion secondary battery were fabricated by r.f. magnetron sputtering technique. As-deposited films were amorphous. A spinel structure could not be obtained LiMn2O4 films by in-situ thermal annealing. After post thermal annealing over $700^{\circ}C$ in oxygen atmosphere, LiMn2O4 films prepared above 100 W r.f. power could be crystallized into a spinel structure. The electrochemical property of the LiMn2O4 film cathodes was tested in a Li/1 M LiClO4 in PC/LiMn2O4 cell. From cyclic voltammetry at scan rate of 2mV/sec of 2.5~4.5V, LiMn2O4 electrode prepared by post annealing at 75$0^{\circ}C$ showed good initial capacity. LiMn2O4 electrode prepared by post annealing at 80$0^{\circ}C$ showed the best crycling performance.

• 센서학회지
• /
• 제24권4호
• /
• pp.274-279
• /
• 2015

This paper describes optimizing fabrication methods for 2-axis electrically levitated MEMS gyroscope. Electrostatically levitated gyroscope has very high potential of performance due to the fact that its proof mass is not mechanically bound to any other structures, but its complex structure and difficulty of fabrication holds back the research that only a few researches have been reported. In this work, fabrication method for glass-silicon-glass 3-floor structure for 2-axis electrically levitated MEMS gyroscope is presented, including simplified multi-level glass etch method utilizing photoresist attack, preventing metal diffusion by adding middle layer of metal electrode, overcoming Deep RIE limitation by separate fabrication of silicon structures and keeping the electrode safe from dicing debris.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.732-735
• /
• 2002

By forming lens-like shapes on the electrode surfaces in OLEDs, the external quantum efficiency is enhanced. The external quantum efficiency of the proposed structure can be much more increased compared to that of the flat structure by decreasing the length of major axis and increasing the length of minor axis for the lens-like shapes.

• Journal of Information Display
• /
• 제11권2호
• /
• pp.52-56
• /
• 2010

High-efficiency organic light-emitting diodes (OLEDs) based on multilayer transparent electrodes (MTEs) are reported. The dielectric/metal/dielectric (DMD) multilayer electrode based on a thin silver layer achieved high sheet conductance as small as $6{\Omega}/sp$ and a tuning capability in the optical and electrical properties by engineering the inner and outer dielectric layers. In the conventional normal bottom-emitting structure, a DMD-based OLED can be fabricated with 90% higher forward luminous efficiency and 30% higher external quantum efficiency (EQE) compared to ITO-based devices. Special attention was paid to the optimization method of such MTE structure considering both the injection and optical structures.

• Transactions on Electrical and Electronic Materials
• /
• 제3권4호
• /
• pp.27-31
• /
• 2002

Thin film diode with reliable interfacial structure was fabricated by using multi-step anodic oxidation. The thickness of the oxide layer was preciously controlled with anodic voltage. Also, interfacial structure between oxide layer and top electrode was improved by applying post heat-treatment. The thin film diode showed symmetric and stable I-V characteristics after the post heat-treatment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1785-1787
• /
• 1998

The plasma display panels with newly designed sustain electrode structure have been proposed and its characteristics hate been measured. One has a enlarged discharge path, and the other has a concentration point of electric potential. These structures have a high luminance and luminous efficiency.