• Corrosion Science and Technology
• /
• v.13 no.1
• /
• pp.20-27
• /
• 2014

The structures of reinforced concrete has been extensively increased with rapid development of industrial society. Futhermore, these reinforced concretes are easy to expose to severe corrosive environments such as sea water, contaminated water, acid rain and seashore etc.. Thus, corrosion problem of inner steel bar embedded in concrete is very important in terms of safety and economical point of view. In this study, multiple mortar test specimen(W/C:0.4) with six types having different cover thickness each other was prepared and was immerged in seawater solution for five years to evaluate the effect of cover thickness and immersion years to corrosion property of embedded steel bar. And the polarization characteristics of these embedded steel bars was investigated using electrochemical methods such as measuring corrosion potential, cathodic polarization curve, and cyclic voltammogram. At the beginning of immersion, the corrosion potentials exhibited increasingly nobler values with increasing cover thickness. However, after immersed for 5 years, the thicker cover of thickness, the corrosion potentials shifted in the negative direction, and the relationship between corrosion potential and cover thickness was not in good agreement with each other. Therefore, it is considered that the thinner cover of thickness, corrosive products deposited on the surface of the embedded steel bar plays the role as a resistance polarization which is resulted in decreasing the corrosion rate as well as shifting the corrosion potential in the positive direction. As a result, it seemed that the evaluation which corrosion possibility of the reinforced steel would be estimated by only measuring the corrosion potential may not be a completely desirable method. Therefore, it is suggested that we should take into account various parameters, including cover thickness, passed aged years as well as corrosion potential for more accurate assessment of corrosion possibility of reinforced steel which is exposed to partially or fully in marine environment for long years.

• Development and Reproduction
• /
• v.6 no.2
• /
• pp.105-110
• /
• 2002

Numerous hormones are involved in the regulation of reproduction. Among them, estrogen and progesterone are the most important ovarian steroid hormones regulating female fertility. On the other hand, diverse stressors impede female receptivity and fertility. Since norepinephrine(NE) and epinephrine(E) are released from the adrenal during stress, it might play a role in stress-induced disruptions of fEmale reproductive parameters. The present study was performed to analyze the changes in adrenal catecholaminergic activities in cycling rats. The tissue content and secretion level of catecholamines were determined by high performance liquid chromatography coupled with electrochemical detector(HPLC-ECD). Adrenomedullary content of norepinephrine(NE) was increased on proestrus stage (59.47 $\pm$ 6.86 ug/gland), peaked on diestrus I stage(65.22 $\pm$ 5.99 ug/gland), and was nadir on diestrus II stage(41.63 $\pm$ 1.33 ug/gland). The highest E content was observed on proestrus stage(361.86 $\pm$ 15.58 ug/gland) while the lowest level was on diestrus II stage(285.58 $\pm$ 12.25 ug/gland). In addition to these observations, a significant reduction of the NE : E ratio was observed (1 : 4.81 on diestrus I vs 1 : 6.13～7.02 on other stages). In vitro secretion of adrenal NE and E was increased on proestrus stage, peaked on estrus stage, and decreased on diestrus II stage. Interestingly, the NE : E ratio in conditioned media was significantly increased on estrus stage (1 : 3.32 vs 1 : 2.34～2.65 on other stages. The biosynthesis of NE and E is mediated by tyrosine hydroxylase(TH) and phenylethanolamine-N-methyltransferase(PNMT) which acts conversion of tyrosine into DOPA and NE into E, respectively. These finding demonstrated that sex steroids, during setrous cycle, seem to be able to modify the adrenal catecholamines biosynthesis and secretion with stage-specific manner by modulation of the enzyme activities.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.551-557
• /
• 2013

In the present study, pristine carbon nanotube (p-CNT) and thiolated carbon naotube (t-CNT) electrodes were investigated to improve their detectabilities for cadmium (Cd) and lead (Pb). In addition, we evaluate which reaction mechanism is used when the electrolyte contains both Cd and Pb metals. Square wave stripping was employed for analyzing the sensitivity for the metals. A frequency of 30 Hz, a deposition potential of -1.2 V vs. Ag/AgCl and a deposition time of 300 s were used as optimal SWSV parameters. t-CNT electrodes show the better sensitivity for both Cd and Pb metals than that of p-CNT electrodes. In case of Cd, sensitivities of p-CNT and t-CNT electrodes were $3.1{\mu}A/{\mu}M$ and $4.6{\mu}A/{\mu}M$, respectively, while the sensitivities for Pb were $6.5{\mu}A/{\mu}M$ (p-CNT) and $9.9{\mu}A/{\mu}M$ (t-CNT), respectively. The better sensitivity of p-CNT electrodes is due to the enhancement in the reaction rate of metal ions that are facilitated by thiol groups attached on the surface of CNT. When sensitivity was measured for the detection of Cd and Pb metals present simultaneously in the electrolyte, Pb indicates better sensitivity than Cd irrespective of electrode types. It is ascribed to the low standard electrode potential of Pb, which then promotes the possibility of oxidation reaction of the Pb metal ions. In turn, the Pb metal ions are deposited on the electrode surface faster than that of Cd metal ions and cover the electrode surface during deposition step, and thus Pb metals that cover the large portion of the surface are more easily stripped than that of Cd metals during stripping step.