• 한국결정성장학회지
• /
• 제31권2호
• /
• pp.96-101
• /
• 2021

Developing effective and earth-abundant electrocatalyst for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is critical for the commercialization of a water splitting system. In particular, the overpotential of the OER is relatively higher than the HER, and thus, it is considered that one of the important methods to enhance the performance of the electrocatalyst is to reduce the overpotential of the OER. We report effects of incorporation of metalloid into Ni(OH)2 microcrystal on electrocatalytic activities. In this study, Te incorporated Ni(OH)2 (��Te-Ni(OH)2) were grown on three-dimensional porous NF by a facile solvothermal method with �� = 1, 3 and 5. Homogeneous microplate structure on the NF was clearly observed for the Ni(OH)2/NF and ��Te-Ni(OH)2/NF samples. However, irregular and collapsed nanostructures were found on the surface of nickel foam when Te precursor ratio is (��) over 3. Electrocatalytic OER properties were analysed by Linear sweep voltammetry (LSV) and Electrochemical impedance spectroscopy (EIS). The amount of Te incorporation used in the electrocatalytic reaction was found to play a crucial role in improving catalytic activity. The optimum Te amount (��) introduced into the Ni(OH)2/NF was discussed with respect to their OER performance.

• 공업화학
• /
• 제32권4호
• /
• pp.442-448
• /
• 2021

고분자전해질 연료전지에서 분리판 유로 형상은 유체 공급과 물 및 열 확산, 접촉 저항 등에 영향을 주는 중요한 요소이다. 본 연구에서는 25 cm² 단위 전지를 이용하여 공기극에 구리폼을 적용한 분리판을 이용하여 연료전지 성능 평가를 수행하였다. 압력과 상대습도 조건에 대한 영향을 분극 곡선과 전기화학적 임피던스 분광법을 이용하여 분석하였다. 구리폼의 ohmic 저항이 높아 사형유로형상 보다 연료전지 성능은 낮았지만, 다공성 구조로 인한 균일한 연료 분포로 활성화 손실과 물질전달 손실이 적은 것을 확인하였다. 구리폼의 소수성이 높아 물 배출이 유리한 장점이 있지만, 저가습 조건에서는 사형유로에 비하여 전해질막 수화도가 낮은 것을 확인하였다. 다공성 금속 분리판은 균일한 압력 분포와 효과적인 수분 배출로 연료전지 성능을 개선할 수 있을 것으로 판단되며, 저항을 최소화할 수 있도록 금속폼의 물성에 대한 연구가 수행되어야 할 것이다.

• 공업화학
• /
• 제32권1호
• /
• pp.68-74
• /
• 2021

고분자전해질 연료전지 성능에서 기체확산층 압축률은 계면 접촉 저항과 전극으로의 반응물 전달 및 전극 내 수분 포화도에 영향을 주는 중요한 변수이다. 본 연구에서는 국내 상용 제품인 JNT20-A3를 이용하여 기체확산층 압축률에 대한 연료전지의 성능 평가를 수행하였다. 전극면적 25 ㎠ 단위 전지를 이용하여 상대습도 조건과 압축률에 대한 전기화학 임피던스 분광법과 분극 곡선을 측정하였다. 기체확산층을 18.6%에서 38.1%으로 압축시켰을 때 상대습도 100, 25% 조건에서 ohmic 저항이 각각 8, 30 mΩ·㎠이 감소하여 기체확산층 압축률이 증가할수록 접촉 저항이 감소하는 것과 동시에 막의 수화도가 증가하는 것을 확인하였다. 상대습도 조건에 대한 ohmic 저항의 변화 경향을 통하여, 압축률을 증가시켰을 때 기체확산층의 기공이 감소하여 공기극에서의 물 역확산과 전해질 막의 수화도가 증가하는 것을 확인하였다.

• Corrosion Science and Technology
• /
• 제21권6호
• /
• pp.434-444
• /
• 2022

Corrosion inhibitors based on Zn-Al hydrotalcites containing benzoate (ZnAlHB) with different molar ratios of Zn/Al were prepared with a co-precipitation process. Compositions and structures of the resulting hydrotalcites were studied with suitable spectroscopic methods such as inductively coupled plasma mass spectrometry (ICP-MS), ultraviolet-visible spectrophotometry (UV-Vis), scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and surface zeta potential measurements, respectively. Results of physico-chemical studies showed that crystallite sizes, compositions of products, and surface electrical properties were significantly changed when the molar ratio of Zn/Al was increased. The release of benzoate from hydrotalcites also differed slightly among samples. Anticorrosion abilities of hydrotalcites intercalated with benzoate at a concentration of 3 g/L on carbon steel were analyzed using electrochemical impedance spectroscopy (EIS), polarization curve, energy-dispersive X-ray spectroscopy (EDX), and SEM. Corrosion inhibition abilities of benzoate modified hydrotalcites in 0.1 M NaCl showed an upward trend with increasing Zn/Al ratio. The reason for the dependence of corrosion resistance on the Zn/Al ratio was discussed, including changes in the microstructure of hydrotalcites such as crystal size, density, uniformity, and formation of ZnO.

• Corrosion Science and Technology
• /
• 제21권3호
• /
• pp.209-220
• /
• 2022

Erosion-corrosion behaviors of Hadfield steel under a neutral aqueous environment with fine SiO₂ particles were examined and compared with those of conventional carbon steel. A range of electrochemical experiments (potentiodynamic polarization, linear polarization, and impedance), immersion test, and slurry pot test (i.e., erosion-corrosion test) were performed. Results showed that the Hadfield steel composed of austenitic matrix with (Fe,Mn)-based carbide had lower corrosion potential and higher corrosion current density than carbon steel with a typical ferrite/pearlite structure. In addition, pipe forming increased total corrosion rates (i.e., pure corrosion and erosion-enhanced corrosion rates). Nevertheless, the erosion-corrosion rate of Hadfield steel was much smaller. Morphological observation showed that local damage in the form of a crater by erosion-corrosion was more noticeable in carbon steel. The higher resistance of Hadfield steel to erosion-corrosion was attributed to its lower total erosion rates (i.e., pure erosion and corrosion-enhanced erosion rates) highly depending on surface hardness. This study suggests that Hadfield steel with higher resistances to flowing erosion-corrosion in an aqueous environment can be applied widely to various industrial fields.

• 한국수소및신에너지학회논문집
• /
• 제33권6호
• /
• pp.743-748
• /
• 2022

The initial operation stability of hydrogen-fueled, solid oxide fuel cell with Ni thin-film anode fabricated by direct current sputtering was evaluated in terms of electrochemical properties such as peak power density, open circuit voltage, overpotential, and alternating current impedance at 500℃. Hydrogen and air were used as anode fuel and cathode fuel, respectively.

• 한국분말재료학회지
• /
• 제30권2호
• /
• pp.107-115
• /
• 2023

Li_1.3Al_0.3Ti_1.7(PO₄)₃(LATP) is considered a promising material for all-solid-state lithium batteries owing to its high moisture stability, wide potential window (~6 V), and relatively high ion conductivity (10^-3-10^-4 S/cm). Solid electrolytes based on LATP are manufactured via sintering, using LATP powder as the starting material. The properties of the starting materials depend on the synthesis conditions, which affect the microstructure and ionic conductivity of the solid electrolytes. In this study, we synthesize the LATP powder using sol-gel and co-precipitation methods and characterize the physical properties of powder, such as size, shape, and crystallinity. In addition, we have prepared a disc-shaped LATP solid electrolyte using LATP powder as the starting material. In addition, X-ray diffraction, scanning electron microscopy, and electrochemical impedance spectroscopic measurements are conducted to analyze the grain size, microstructures, and ion conduction properties. These results indicate that the synthesis conditions of the powder are a crucial factor in creating microstructures and affecting the conduction properties of lithium ions in solid electrolytes.

• 한국수소및신에너지학회논문집
• /
• 제34권2호
• /
• pp.178-186
• /
• 2023

Three activation methods (constant voltage, current cycling, and hydrogen pumping) were applied to investigate the effects on the performance of the membrane electrode assembly (MEA) loaded with PtCo/C catalyst. The current cycling protocol took the shortest time to activate the MEA, while the performance after activation was the worst among the all activation methods. The constant voltage method took a moderate activation time and exhibited the best performance after activation. The hydrogen pumping protocol took the longest time to activate the MEA with moderate performance after activation. According to the distribution of relaxation time analysis, the improved performance after the activation mainly comes from the decrease of charge transfer resistance rather than the ionic resistance in the cathode catalyst layer, which suggests that the existence of water on the electrode is the key factor for activation.

• 한국표면공학회지
• /
• 제56권5호
• /
• pp.299-308
• /
• 2023

In this study, phosphorus (P)-doped nickel cobaltite (P-NiCo₂O₄) and nickel-cobalt layered double hydroxide (P-NiCo-LDH) were synthesized on nickel (Ni) foam as a conductive support using hydrothermal synthesis. The thermal properties, crystal structure, microscopic surface morphology, chemical distribution, electronic state of the constituent elements on the sample surface, and electrical properties of the synthesized P-NiCo₂O₄ and P-NiCo-LDH samples were analyzed using thermogravimetric analysis-differential scanning calorimetry (TGA-DSC), X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy (EIS). The P-NiCo₂O₄ electrode exhibited a specific capacitance of 1,129 Fg^-1 at a current density of 1 Ag^-1, while the P-NiCo-LDH electrode displayed a specific capacitance of 1,012 Fg^-1 at a current density of 1 Ag-1. When assessing capacity changes for 3,000 cycles, the P-NiCo₂O₄ electrode exhibited a capacity retention rate of 54%, whereas the P-NiCo-LDH electrode showed a capacity retention rate of 57%.

• 전기화학회지
• /
• 제5권3호
• /
• pp.131-142
• /
• 2002

순환전압전류 및 교류임피던스 기법을 이용하여 다결정 Pt/0.5M $H_2SO_4$ 및 0.5M LiOH수용액 계면에서 저전위 수소흡착(UPD H) 과 전위 수소흡착(OPD H)에 관한 Langmuir 흡착등온식 $({\theta}\;vs.\;E)$ 을 연구조사 하였다. 계면에서 치적중간주파수일 때 위상이동$(0^{\circ}{\leq}{-\phi}{\leq}90^{\circ})$ 거동은 표면피복율$(1{\geq}{\theta}{\geq}0)$ 거동에 정확하게 상응한다. 위상이 동 방법 즉 최적중간주파수일 때 위상이동 변화$({-\phi}\;vs.\;E)$는 계면에서 음극 $H_2$ 발생 반응에 관한 UPD H와 OPDH의 Langmuir흡착등온식을 결정할 수 있는 새로운 전기화학적 방법으로 사용할 수 있다 다결정 Pt/0.5M $H_2SO_4$ 수용액 계면에서 OPD H의 흡착평형상수(K)와 표준자유에너지$({\Delta}G_{ads})$는 각각 $2.1\times10^{-4}$와 21.0kJ/mol 이다. 다결정 Pt/0.5M LiOH 수용액 계면에서 K는 음전위(E)에 따라 2.7 (UPD H)에서 $6.2\times10^{-6}$ (OPD H) 또는 $6.2\times10^{-6}$(OPD H)에서 2.7 (UPD H)로 전이한다. 유사하게 ${\Delta}G_{ads}$는 E에 따라 -2.5kJ/mol (UPD H)에서 29.7kJ/mol (OPD H)또는 29.7kJ/mol (OPD H)에서 -2.5kJ/mol (UPD H)로 전이한다. K와 ${\Delta}G_{ads}$의 전이는 다결정 Pt전극 표면의 상이한 UPD H와 OPD H의 흡착부위에 기인한다. 다결정 Pt전극 계면에서 UPD H와 OPD H는 음극 $H_2$ 발생 반응에 따른 순차적 과정이 아니라, 수소 흡착부위 자체에 따른 독립적 과정이다. UPD H와 OPD H의 기준은 음극 $H_2$발생 반응과 전위가 아니라, 수소 흡착부위와 과정이다. 수용액에서 음극 $H_2$발생 반응에는 다결정 Pt선 전극이 단결정 Pt(100)원반 전극보다 더 효율적이고 유용하다 위상이동 방법은 열역학적 방법과 상충적이 아니라, 보완적이다.