• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.102.2-102.2
• /
• 2008

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.89.2-89
• /
• 1998

• Journal of Oral Medicine and Pain
• /
• 제33권2호
• /
• pp.133-145
• /
• 2008

본 연구의 목적은 전기 미각 측정기를 사용하여 구강점막질환(구강편평태선, 재발성 아프타성 궤양)을 지닌 환자의 미각 감수성을 조사하기 위함이다. 173명의 환자가 100명의 대조군과 73명의 실험군으로 구성되었으며 73명의 환자는 부산대학 병원 구강내과에 2005년 4월부터 2007년 1월까지 내원하였다. 대조군은 2006년 2월부터 8월까지 청주 및 인천 소재 치과의원에 내원한 치과환자를 대상으로 하였다. 전기미각측정기(electrogustometer)를 사용하여, 오른쪽 혀끝, 측방 중앙부위, 유곽유두 근처부위, 연구개부위에 미각측정을 시행하였으며 그 결과는 다음과 같다. 1. 실험군에서의 전기 미각 역치는 대조군에서 보다 유의하게 낮은 수치를 나타내었다(p<0.001). 2. 실험군에서 만성도와 병소의 개수에 따른 전기 미각 역치의 주목할 만한 변화는 관찰되지 않았다. 3. Dexan을 단독 사용했을 때와 Dexan과 Prednisolone을 함께 투여한 환자들에서, 전기 미각 역치의 주목할 만한 변화는 관찰되지 않았다. 4. 치료 경과(반응없음 vs 1/2 개선 vs 완전개선)에 따른 전기 미각 역치의 주목할만한 변화는 없었다. 그러나 NAS에 의해 측정된 증상의 개인적 지표는 미반응 군에서는 주목할 정도로 증가하였으며 완전 개선 군에서는 눈에 띄게 감소하였다(p<0.001)

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 제5회 학술대회 논문집 일렉트렛트 및 응용기술연구회
• /
• pp.57-60
• /
• 2003

Electro-Optical (EO) performances for the ion beam (IB) aligned twisted-nematic (TN)-liquid crystal display (LCD) with ion beam exposure on the new of diamond like carbon (DLC) thin film surface were investigated. Voltage-transmittance (V-T) curve and response time without backflow bounce in the ion beam aligned TN-LCD with ion beam exposure for 0.5 and 1min on the DLC thin film was observed. Also. the fast response time of ion beam aligned TN-LCD with ion beam exposure for 1min on the DLC thin film surface can be achieved. The residual DC voltage of the ion beam aligned TN-LCD on the DLC thin film surface was almost the same as that of the rubbing aligned TN-LCD on the polyimide(PI) surface.

• 대한수의학회지
• /
• 제37권1호
• /
• pp.103-110
• /
• 1997

The experiments were carried out to elucidate the relationships between neurogenic effects of electrical transmural nerve stimulation and effect of adenosine 5'-triphosphate(ATP) to purinoceptor on the urinary bladder smooth muscle of pig. The results were as follows : 1. The contractile responses induced by electrical transmural nerve stimulation(10V or 20V, 0.5msec, 10sec) were the frequency(2~64Hz) dependent manner. 2. The contractile response induced by carbachol was responsed with a dose-dependent manner and the maximum contractility was $10^{-4}M$. 3. The contractile responses induced by ATP were increased in a dose-dependent manner ($10^{-5}{\sim}10^{-3}M$). 4. The contractile response induced by electrical transmural nerve stimulation(10V, 2~32Hz, 0.5msec, 10sec) was partially blocked by the treatment with atropine($10^{-5}M$), and was powerfully inhibited by 3 times of addition with ATP($10^{-5}M$). 5. The contractile response induced by electrical transmural nerve stimulation(10V, 2~32Hz, 0.5msec, 10sec) was partially blocked by the treatment with atropine($10^{-5}M$), and was completely blocked by the desensitization of the $P_{2X}$-purinoceptor using ${\alpha}$, ${\beta}$-methylene ATP($5{\times}10^{-5}M$). These results suggest that purinergic nerve was innervated, and ATP and acetylcholine was released by the electrical transmural nerve stimulation in urinary bladder smooth muscle of pig.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.154-155
• /
• 2007

This paper describes frequency response of two-mass system for gyroscope applications. The two-mass system of the proposed device is adapted to the sensing part of the gyroscope in this research. Two-mass system has two resonant peaks and wide flat region between two resonant peaks. The resonant frequency of driving part is in this flat region. Therefore, frequency tuning is not necessary for mode matching. In the proposed device, resonant frequency is designed as 7183 Hz in driving part. Mass ratio of two masses in sensing part is 0.1 and device size is 6 mm $\times$ 6 mm. The device is fabricated by SiOG process. The fabricated spring width is increased from $4{\mu}m$ to $4.5{\sim}4.7{\mu}m$, and the measured resonant frequency is 8392 Hz in driving mode. We operated the sensing part using parallel plate of proof mass to verify the sensing part. It is confirmed the device has a wide fiat region in frequency response curve and the resonant frequency of the driving part is in the wide flat region of sensing mode.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.224-225
• /
• 2009

Aluminium nitride thin film was deposited on Au electrode and Si substrate by radio frequency sputtering system. X-ray diffraction (XRD) was utilized to identify the AlN phase, and Atomic Force Microscope (AFM) was used to obtain the images of surface morphology and roughness value of AlN thin film. The result of XRD and AFM measurement showed that the AlN thin film has strong c-axs orientation and smooth surface. In order to investigate piezoelectric response and polarization properties along to the direction of electric field, PFM (Piezoresponse Force Microscope) system was used, and the images of piezoelectric response due to switching of polarization was observed by PFM.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권4호
• /
• pp.185-191
• /
• 2003

In this Paper, we propose an accurate and stable solution of the transient electromagnetic response from three-dimensional arbitrarily shaped conducting objects by using a time domain magnetic field integral equation. This method does not utilize the conventional marching-on in time (MOT) solution. Instead we solve the time domain integral equation by expressing the transient behavior of the induced current in terms of temporal expansion functions with decaying exponential functions and Laguerre·polynomials. Since these temporal expansion functions converge to zero as time progresses, the transient response of the induced current does not have a late time oscillation and converges to zero unconditionally. To show the validity of the proposed method, we solve a time domain magnetic field integral equation for three closed conducting objects and compare the results of Mie solution and the inverse discrete Fourier transform (IDFT) of the solution obtained in the frequency domain.

• 센서학회지
• /
• 제21권6호
• /
• pp.425-428
• /
• 2012

This paper presents the fabrication and characterization of graphene based hydrogen sensors. Graphene was synthesized by annealing process of Ni/3C-SiC thin films. Graphene was transferred onto oxidized Si substrates for fabrication of chemiresistive type hydrogen sensors. Au electrode on the graphene shows ohmic contact and the resistance is changed with hydrogen concentration. Nanoparticle catalysts of Pd and Pt were decorated. Response factor and response (recovery) time of hydrogen sensors based on the graphene are improved with catalysts. The response factors of pure graphene, Pt and Pd doped graphenes are 0.28, 0.6 and 1.26, respectively, at 50 ppm hydrogen concentration.

• 전기학회논문지
• /
• 제57권10호
• /
• pp.1869-1875
• /
• 2008

Recently, a direct data-driven synthesis of a proportional integral derivative(PID) controller for a linear time-invariant(LTI) plant was presented in [1]. The authors showed that a complete set of PID controllers achieving robust performance and stability can be calculated directly from frequency response(FR) data without an identified transfer function model. However, it is not convenient to use this method because it requires complicated numerical algorithms to find specific frequencies which are solutions of an identical equation. The method also requires determination of the boundary of the controller's parameters from a finite set of FR data. In this paper, we present the development of a user-friendly Matlab toolbox based on the method in [1]. This toolbox allows us to obtain a complete three-dimensional(3-D) graphical solution of PID controllers that meet multiple design objectives. Several examples are given to demonstrate the use of the toolbox.