• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.1
• /
• pp.13-19
• /
• 2005

The performance of two designs of permanent magnet brushless motor, by having self-shielding magnetized magnets or sinusoidally shaped parallel-magnetized magnets with essentially sinusoidal airgap flux distributions, are compared. It is shown that the parallel-magnetized motor with shaped sintered NdFeB magnets can result in a higher airgap flux density and torque density than that of a self-shielding magnetized motor equipped with an anisotropic injection moulded NdFeB ring magnet.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1474-1477
• /
• 2005

This paper is proposed maximum torque per ampere of induction motor using fuzzy-neural networks controller. Operation of maximum torque per ampere is achieved when, at a given torque and speed, the slip frequency is adjusted to that so that the stator current amplitude is minimized. This paper introduces a induction motor drive system with fuzzy-neural networks controller. A neural network-based architecture is described for fuzzy logic control. The characteristic rule and their membership function of fuzzy system are represented as the processing nodes in the neural network structure. This paper is proposed the analysis as well as the simulation results to verify the effectiveness of the new method.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.3
• /
• pp.235-240
• /
• 2014

A novel segment type switched reluctance motor (SRM) as a rare-earth-less motor is proposed. The torque was increased by 40% and the radial force was decreased by 76% compared with the same size usual variable reluctance (VR) type SRM. Increasing the average torque, however, caused increasing torque ripple. In this paper we develop a 4-phase segment type SRM and show that the torque ripple can be decreased well.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.958-964
• /
• 2015

This paper implements a model of a double excited three-degree-of-freedom motor (3-DOF) coupled with a PI current controller for position control. The rotational trends of the rotor according to the applied steps are identified using a motion equation. The simulation model is a complete electrical and mechanical model of a 3-DOF motor, which mainly consists of mechanical torque equations, a nonlinear equivalent magnetic circuit, and a PI current controller. This machine is tested using the manufactured control board using the same conditions as in the simulation, where the experimental results also verify the accuracy of the simulation results.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.41-43
• /
• 2008

This paper deals with a study on characteristic of inductance on spoke type motor. The rotor and stator is redesigned as rounding teeth of stator and pole surface of rotor. Result, a shape of air-gap is changed and the cogging torque is reduced greatly. In consequence, the inductance of spoke type motor is changed. The Finite Element Analysis(FEM) is used to characteristics.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.2B no.3
• /
• pp.95-99
• /
• 2002

This paper deals with the influence of the various stator structures in a Switched Reluctance Motor (SRM) on the vibration behaviors. The stator part in SRMs produces most vibrations. Therefore, the geometric design of the stator is necessary to reduce the vibration. The free and forced vibrations for four different stator yoke structures are analyzed by the electromagnetic and structural Finite Element Method (FEM). Then vibration stator structure that offers less is proposed. The modal analysis results of a tested motor are compared with measurements.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.2
• /
• pp.184-189
• /
• 2013

This paper proposes a method for improving the performance of a position sensorless control system for a slotless surface permanent magnet synchronous motor (SPMSM) in a very low-speed region. In position sensorless control based on a motor model, accurate motor parameters are required because parameter errors would affect position estimation accuracy. Therefore, online parameter identification is applied in the proposed system. The error between the reference voltage and the voltage applied to the motor is also affect position estimation accuracy and stability, thus it is compensated to ensure accuracy and stability of the sensorless control system. In this study, two voltage error compensation methods are used, and the effects of the compensation methods are discussed. The performance of the proposed sensorless control method is evaluated by experimental results.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.955-957
• /
• 2003

In this paper deal with Initial Pole Position Estimation for Interior Permanent Magnet Motor. Generally, Brushless motor is considered Initial Pole Position with absolute encoder or resolver, etc. In the motor, the flux from the magnets is large enough to saturate the stator iron, results in different inductance values along the pole position. Based upon the relationship between magnitude of inductance and the resultant magnetic filed, initial pole position is estimated at standstill without position sensors, especially, this paper provide the direction of the magnetization. Finally, analysis results are presented to confirm ability of initial pole position estimation.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1080-1082
• /
• 2005

This paper presents the system design of permanent magnet linear synchronous machine with double-side PM mover and slotless iron-cored stator in the required speed and thrust. in this paper, the design of manufacturing motor is optimized by characteristics of motor parameters with the variation of PM size and coil turns. And, the permissible operating range of manufactured motor by determination of base speed and base thrust according to switching scheme of DC link voltage are offered. Finally, the results of analytical solutions are verificated by finite element analysis and experiment.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.39-41
• /
• 1995

The inherent performance of Ultrasonic Motor(USM) which is on of highlighted a directly-driven positioning servo motor/actuator. In this paper, the speed of control USM based on neural network control. The neural network control can roughly be classified as the direct control and indirect control schemes. An indirect control scheme is adopted for Ultrasonic Motor speed control. A back propagation algorithm is used to train neural network controller. The Simulation results show that this neural network control system can provide good dynamical responses.