• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.391-392
• /
• 2008

A surface micromachined uncooled microbolometer based on the amorphous silicon was designed and fabricated. We designed the microbolometer with a pixel size of $35\times35$, $44\times44{\mu}m^2$ and a fill factor of about 70 % by considering such important factors as the thermal conductance, thermal time constant, the temperature coefficient of resistance, and device resistance. Finally, we successfully fabricated the microbolometer by using surface MEMS technology, and the properties of bolometer have been measured as such that TCR and absorptance can be achieved above -2.5%/K and about 90% with titanium layer, respectively.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.6
• /
• pp.274-283
• /
• 2005

This paper presents a new method to derive energy function based on vector product. Using this method, an energy function to consider transfer conductances and capacitors is derived. Then we recommend a voltage collapse criteria to predict the voltage collapse in power systems by using the energy margin derived by the proposed energy function. This energy function is applied to a 2-bus power system reflecting transfer conductances and capacitors. We show that the energy function derived based on vector product can be applied in order to analyze power system stability and the energy margin can be utilized as a criterion of voltage collapse by simulation for the 2-bus system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.103-106
• /
• 1999

In this paper, we suggest the FED packaging technology that have 4mm thickness, using sodalime glass-to-sodalime glass electrostatic bonding. It based on conventional silicon-glass bonding. The silicon film was deposited an around the exhausting hole on FED backside panel. And then, the silicon film of panel was successfully bonded with capping(bare) glass in vacuum environment and the FED panel was vacuum-sealed. In this method, we could achieve more 153 times increased conductance and 200 times increased vacuum efficiency than conventional tube packaging method. The vacuum level in panel, by SRG test, was maintained about low 10$_{-4}$ Torr during above two months And, the light emission was observed to 0.7-inch tubeless packaged FED. Then anode current was 34 $\mu$ A. Emission stability was constantly measured for 10 days.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.3
• /
• pp.471-478
• /
• 2011

This paper proposes a method of maximum power point tracking (MPPT) using fuzzy logic control for grid-connected photovoltaic systems (PV). First, for the purpose of comparison, because of its proven and good performances, the incremental conductance (IncCond) technique is briefly introduced. A double fuzzy logic controller (DFLC) based MPPT is then proposed which has shown better performances compared to the IncCond MPPT based approach. Modeling and Simulation in grid-connected PV system results are provided for both controllers under same atmospheric condition based PSCAD/EMTDC. The double fuzzy logic MPPT controller is then simulated and evaluated, which has shown better performances.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.5
• /
• pp.347-352
• /
• 1998

In this paper, the extraction and optimization of SPICE parameters on SONOSFET for NVSM circuit design were discussed. SONOSFET devices with different channel widths and lengths were fabricated using conventional 1.2 um n-well CMOS process. And, electric properties for dc parameters and capacitance parameters were measured on wafer. SPICE parameters for the SONOSFET were extracted from the UC Berkeley level 3 model for the MOSFET. And, local optimization of Ids-Vgs curves has carried out in the bias region of subthreshold, linear, saturation respectively. Finally, the extracted SPICE parameters were optimized globally by comparing drain current (Ids), output conductance(gds), transconductance(gm) curves with theoretical curves in whole region of bias conditions. It is shown that the conventional model for the MOSFET can be applied to the SONOSFET modeling except sidewalk effect.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.292-293
• /
• 2005

An electromagnetic memory effect observed in superconducting YBCO system was studied. From the measurement of differential conductance, it was cleared that the mechanism of electromagnetic memory can not be explained by using conventional flux flow model. By changing the density of external magnetic flux, changes in inductance of a coil in which a superconducting bar is inserted were also measured. It was concluded that the electromagnetic memory effect aries from the interaction between the trapped magnetic flux and the weak link of the filament formed in the superconducting bar.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.2
• /
• pp.184-190
• /
• 2009

One of the purposes of arc control is to change its state to the diffuse state before current zero as soon as possible. This can provide optimal conditions for full extinction of arc by minimizing the quantity of residual plasma between contacts near current zero. TRV(transient recovery voltage) occurs at current zero at the same time with current interruption. If there is substantial residual plasma near current zero it can cause 'post arc current' by the interaction of its conductance with TRV. In this paper, arc control ability as a function of configuration of spiral type VI contacts was compared on the criteria of the time taken for arc to reach to the diffuse state.

• Journal of Plant Biotechnology
• /
• v.38 no.3
• /
• pp.203-208
• /
• 2011

We transferred Dhn5 (dehydrin5) gene from barley to poplar to determine the effect of its expression on the transgenic poplars. The results from northern blot analysis showed that the expression level of gene varied among the transgenic lines. During their culture on tissue culture media, the transgenic poplars formed vigorous growing callus in the presence of 5% PEG. When the transgenic poplars were growing in pots and witheld watering, they stayed much healthier than nontransgenic poplars. The transgenic poplars showed higher rates of photosynthetic rates, stomatal conductance and evaporation rates under the drought stress, although there was no significant difference in soil water content within the treatments. The relative electrical conductivity of the transgenic poplars after 20% PEG treatment was lower than that of nontransgenic poplars. The results provide evidence that the expression of hvDhn5 gene conferred drought tolerance in the transgenic poplars.

• Journal of IKEEE
• /
• v.13 no.2
• /
• pp.216-219
• /
• 2009

$V_2O_5$ nanowire / polyvinyl alcohol (PVA) polymer composite fibers were fabricated by a new simple method. The reaction of PVA and acetone facilitates the formation of the polymer membrane which can be used to make the fiber. Composite fiber is percolative in the conductance because of the low percolation threshold in $V_2O_5$ nanowire networks. The fiber composite can be applied to the electromagnetic shielding originating from the conductive nature.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.3
• /
• pp.262-267
• /
• 2013

The recognition of human emotional state is one of the most important components for efficient human-human and human- computer interaction. In this paper, four emotions such as fear, disgust, joy, and neutral was a main problem of classifying emotion recognition and an approach of visual-stimuli for eliciting emotion based on physiological signals of skin conductance (SC), skin temperature (SKT), and blood volume pulse (BVP) was used to design the experiment. In order to reach the goal of solving this problem, half-against-half (HAH) multi-class support vector machine (SVM) with Gaussian radial basis function (RBF) kernel was proposed showing the effective techniques to improve the accuracy rate of emotion classification. The experimental results proved that the proposed was an efficient method for solving the emotion recognition problems with the accuracy rate of 90% of neutral, 86.67% of joy, 85% of disgust, and 80% of fear.