• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.3
• /
• pp.142-149
• /
• 2002

As is well-known, the maximum power point (MPP) of PV power generation system depends on array temperature and solar insolation, it is necessary to track MPP of solar array all the time. Among various MPP control algorithms, the constant voltage control method, the perturbation and observation (P&O) method and the incremental conductance method (IncCond) have drawn many attractions due to the usefulness of each system. In this parer, the effectiveness of above mentioned three different control algorithms are thoroughly investigated via simulations and preposed efficiency evaluation method on experiment. Both the steady-state and transient characteristics of each control algorithms along with measured efficiency are analyzed, respectively. Finally, a novel MPPT control algorithm combining the constant voltage control and IncCond method for low insolation condition is proposed to improve efficiency of the 3KW PV power generation system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.474-474
• /
• 2011

Graphene is considered as a potential candidate for the key material in the ideal 2D nanoelectronics. Recently, it is reported that graphene has an interesting sensitivity to molecular adsorption on it. Such properties are believed to be enhanced by the existence of disorders and ripples inside graphene as well as by the interaction with the substrate underneath. Here, we report the effect of introducing structural disorders to the graphene on its electrical properties such as conductance, transconductance, low frequency noise, which can be successfully described by a simple model of the continuum percolation. In addition, the response of the graphene device to gaseous molecular adsorption was systematically investigated and the results were discussed along with the change in Raman spectra.

• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.374-387
• /
• 2016

This paper derives an improved analytical model to estimate switching loss and analyze the effects of parasitic elements on the switching performance of SiC MOSFETs. The proposed analytical model considers the parasitic inductances, the nonlinearity of the junction capacitances and the nonlinearity of the trans-conductance. The turn-on process and the turn-off process are illustrated in detail, and equivalent circuits are derived and solved for each switching transition. The proposed analytical model is more accurate and matches better with experimental results than other analytical models. Note that switching losses calculated based on experiments are imprecise, because the energy of the junction capacitances is not properly disposed. Finally, the proposed analytical model is utilized to account for the effects of parasitic elements on the switching performance of a SiC MOSFET, and the circuit design rules for high frequency circuits are given.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.9
• /
• pp.783-788
• /
• 2008

We suggest a CNT-based gas sensor for breath alcohol measurement. The sensor was composed of single-walled carbon nanotubes (SWCNTs) thin film on flexible PES (polyethersulfone) substrate, and the SWCNTs thin film was formed by multiple spray-coating with SWCNTs solution which was well-dispersed, highly controlled and functionalized in ethanol solvent. In this work, three types of SWCNTs thin films were deposited with changes in the number of spray-coatings to 20, 40 and 60 times in order to compare electrical response properties of the SWCNTs thin films. from the fabricated sensors, conductance and capacitance responses were measured and discussed. Alcohol gas sensors have been commercialized widely as gauge for breath alcohol measurement which is applicable to checking whether car drivers are drinking-driving or not. Our alcohol gas sensors showed good sensitivity and linearity even at room temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.498-499
• /
• 2007

금속 비저항의 측정방법은 4단자 방법을 비롯한 van der Pauw 방법, Four-Point Probe(FPP) 방법, eddy current 방법 등이 사용되고 있으며, 시료의 혈상과 크기에 따라서 그 측정방법은 각각 다르다. 본 연구에서는 그 중 4단자 방법에 의한 정밀측정방법과 측정불확도 평가에 관하여 고찰하였다. 4단자 방법은 시료가 바(bar)나 봉(rod) 형상이면 측정이 가능하며, 시료의 정밀가공과 측정기술을 통하여 측정 불확도를 줄일 수 있다.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.2
• /
• pp.117-121
• /
• 2010

The composite films were fabricated by air-spray method under the 2 kgf/$cm^2$ pressure using the multi-walled CNTs solution and the nitrocellulose on a 10 ${\mu}m$ polyimide film substrates. We obtained the composite films which were sprayed with the MWCNT dispersion by varying the spray time from 20, 40 and 60sec. The electrical and the optical properties of the sandwiched-structure-composite thin films were investigated by an UV/VIS spectrometer and a Hall Effect equipment. As a result, the optical transmittance of all thin films in the visible range, as well as the electrical conductance shows an available value for the transparent electrode. The carrier concentration and the light transmittance rate for the fabricated sample are between $3.733{\times}10^{10}$ and $6.551{\times}10^{14}cm^{-3}$, around 35 to 95%, respectively.

• Journal of Biomedical Engineering Research
• /
• v.40 no.3
• /
• pp.75-80
• /
• 2019

Listening effort represents the listener's attention, stress, required cognition resource, and mental exertion to understand a speech in various situations. Recently, it has been focused to evaluate an effectiveness of hearing aids and cochlear implant. The physiologic measures, such as heart rate, skin conductance, electroencephalography, and pupil dilation, have been used to objectively measure listening effort. In this study, we investigated the feasibility of temporal and spectral heart rate variabilities to measure listening effort to understand speech in the presence of background noise. The results showed that several heart rate variabilities significantly increased as increasing background noise level. Finally, the heart rate variability can be used as an objective tool to measure listening efforts.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.3
• /
• pp.159-166
• /
• 2021

This study compares the maximum power point tracking (MPPT) control methods of a thermoelectric generator on vehicles. The researchers conduct comparisons on five different MPPT methods, including a fractional open circuit voltage method, a perturbation and observation (P&O) method, an incremental conductance method, a linear extrapolation-based MPPT (LEMPPT) method, and a LEMPPT/P&O hybrid method. These five MPPT methods are theoretically analyzed in detail, and the comparisons are conducted through MATLAB/Simulink simulation results. The comparison outcomes reveal that linear MPPT methods, including LEMPPT and LEMPPT/P&O hybrid methods, are more suitable for a thermoelectric generator on vehicles than the other MPPT methods examined in this work.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.2
• /
• pp.152-155
• /
• 2011

Even though nano-scale materials were very advantageous for various applications, there are still problems to be solved such as the stabilization of surface state and realization of low contact resistances between a semiconducting nanowire and electrodes in nano-electronics. It is well known that the effects of contacts barrier between nano-channel and metal electrodes were dominant in carrier transportation in individual nano-electronics. In this report, it was investigated the electrical properties of GaN nanorod devices after chemical etching and rapid thermal annealing for making good contacts. After KOH wet-etching of the contact area the devices showed better electrical performance compared with non-treated GaN individual devices but still didn't have linear voltage-current characteristics. The shape of voltage-current properties of GaN devices were improved remarkably after rapid thermal annealing as showing Ohmic behaviors with further bigger conductivities. Even though chemical etching of the nanorod surfaces could cause scattering of carriers, in here it was shown that the most important and dominant factor in carrier transport of nano-electronics was realization of low contact barrier between nano-channel and metal electrodes surely.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.147-150
• /
• 2004

Back gate가 있는 $SiO_2$ 기판에 SWCNT(Single Walled Carbon Nanotube) 분산액을 도포하여 SWCNT 네트워크를 형성하였다. 금선을 shadow mask로 사용하여 $10{\mu}m$ 간격의 2단자 금 전극을 열 증착을 통해 형성하였다. 현미경 포토리소그래피를 통하여 시료의 가장자리를 Photoresist로 남겨두어 시료 가장자리의 나노튜브를 통한 단락을 방지하였다. 전류-전압 특성, 게이트 특성과 온도 의존성은 DAQ(Data Aquisition) 보드와 Keithley 2400을 사용하여 측정하였고, Labview 기반 프로그램을 통해 제어하였다. 음의 게이트 전압에서의 저항 감소를 관측함으로써 네트워크 상태에서의 게이트 의존성이 P 형 반도체 성질을 보여줌을 알 수 있었으며, 온도가 올라감에 따라 저항이 지수 함수적으로 증가하는 것으로부터 네트워크의 온도 의존성이 금속성 온도 의존성을 가지는 것을 확인하였다.