• 대한전자공학회논문지SD
• /
• 제45권11호
• /
• pp.21-28
• /
• 2008

본 논문에서는 단 채널 GaAs MESFET의 포화영역에서의 I-V 특성을 도출하기 위한 해석적 모델을 제안하였다. 기존의 단 채널 GaAs MESFET에 대한 해석이 채널 pinch-off의 개념이 도입되는 모델이었던 반면, 본 논문에서는 저자의 소도 포화 영역이 유한한 채널 폭을 갖으면서 전류 연속 조건을 만족하도록 공핍영역의 2차원 전위 분포 식을 도출하였다. 또한 소도 포화영역의 길이를 채널 전체 길이, 채널 도핑 농도, 게이트 전압 및 드레인 전압의 함수로 도출하여 포화영역에서의 Early 효과를 보다 합리적으로 설명할 수 있음을 보이고 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제48권6호
• /
• pp.869-877
• /
• 2020

The power consumption in the low consistency (LC) refining is an important indicator for the optimal control of the process and it is composed of the net power and the no-load power. The refining efficiency and process characterization of LC refining are directly affected by power consumption. In this paper, the effect of pulp consistency and average fiber length on the power consumption and refining efficiency were studied through the LC refining trials conducted by an experimental disc refiner. It is found that the curve of power-gap clearance can be divided into constant power section, power reduction section, and power increase section. And the no-load power and the adjustable domain of loading applied by the refining plates will increase as the increase of pulp consistency, while the increase of net power is larger than that of no-load power which makes the increasing of refining efficiency. Meanwhile, the adjustable domain of loading applied by the refining plates can be slightly improved by increasing the average fiber length, but its effect on the no-load power in the LC refining process can be neglected. The study of power consumption in LC refining is of positive significance for the proper selection of pulp properties in LC refining, in-depth exploration of refining mechanism, and energy consumption reduction in refining.

• 전기전자학회논문지
• /
• 제19권2호
• /
• pp.265-270
• /
• 2015

본 논문에서는 높은 홀딩 전압을 갖는 SCR(silicon-controlled rectifier)기반 양 방향성 ESD 보호회로를 제안하였다. 일반적인 ESD 보호회로와 달리 양방향의 ESD Stress mode의 방전경로를 제공하며 높은 홀딩전압으로 latch-up면역 특성을 갖어 효과적인 ESD보호를 제공한다. 또한, 높은 홀딩전압을 위한 설계변수인 Gate Length와 N+bridge Length의 길이 변화에 따른 시뮬레이션을 Synopsys사의 TCAD 시뮬레이터를 사용하여 확인 하였다. 시뮬레이션 결과 2.1V에서 6.5V까지 홀딩 전압의 증가로 latch-up 면역 특성을 개선 하였으며, 기존 SCR보다 6.5V의 낮은 트리거 전압특성을 갖고 있어 제안된 ESD 보호 회로는 5V 이상의 공급전압을 갖는 application에 적용 가능하다.

• ETRI Journal
• /
• 제30권1호
• /
• pp.167-169
• /
• 2008

In this paper, we propose hardware architecture for a high-speed context-adaptive variable length coding (CAVLC) decoder in H.264. In the CAVLC decoder, the codeword length of the current decoding block is used to determine the next input bitstreams (valid bits). Since the computation of valid bits increases the total processing time of CAVLC, we propose two techniques to reduce processing time: one is to reduce the number of decoding steps by introducing a lookup table, and the other is to reduce cycles for calculating the valid bits. The proposed CAVLC decoder can decode $1920{\times}1088$ 30 fps video in real time at a 30.8 MHz clock.

• 전기학회논문지
• /
• 제64권2호
• /
• pp.240-246
• /
• 2015

Length of most underground power cable in home is not so long. Therefore it is operated without transposition due to low unbalanced ratio. However, if cable length is long, line constant of each cable will be different. Different line constant can induce unbalanced voltage and current of sheath. Also it can induce several induced interference. This paper describes the effectiveness of transposition through sheath component analysis on transposition and untransposition of cable conductor. Especially sheath current and induced voltage are analyzed and compared in case of transposition and untransposition. EMTP is used for modeling and analysis.

• Journal of Magnetics
• /
• 제20권3호
• /
• pp.322-329
• /
• 2015

This paper presents a new overlapped coilgun configuration to launch medium weight projectiles. The proposed configuration consists of a two-stage coilgun with overlapped coil covers with spacing between them. The theoretical operation of a multi-stage coilgun is introduced, and a transient simulation was conducted for projectile motion through the launcher by using a commercial transient finite element software, ANSOFT MAXWELL. The excitation circuit design for each coilgun is reported, and the results indicate that the overlapped configuration increased the exit velocity relative to a non-overlapped configuration. Different configurations in terms of the optimum length and switching time were attempted for the proposed structure, and all of these cases exhibited an increase in the exit velocity. The exit velocity tends to increase by 27.2% relative to that of a non-overlapped coilgun of the same length.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.597-600
• /
• 2001

In order to investigate the electrical properties of X-ray tube oils for insulating and cooling, the breakdown characteristics in temperature range of $20\sim100[^{\circ}C]$, that of AC breakdown in 0.5~2.5[mm] of gap length, we are made researches. The classification for the physical properties of oil for X-ray tube by FTIR and H-NMR experiments was confirmed to type of mineral oils. As for the dependance of breakdown characteristics due to electrode gap length, breakdown voltage was found nearly uniform by impurity effect according to the increase of gap. As a result the characteristics for AC breakdown, the dielectric strength was increased to $90[^{\circ}C]$ but decreased over $90[^{\circ}C]$ in the temperature range.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권3호
• /
• pp.187-194
• /
• 2005

An analysis of the 1/f or flicker noise in FD n-channel Double Gate SOI MOSFET is proposed. In this paper, the variation of power spectral density (PSD) of the equivalent noise voltage and noise current with respect to frequency, channel length and gate-to-source voltage at various temperatures and exponent $C(i.e\;1/f^c$ is reported. The temperature is varied 125 K from to room temperature. The variation of PSD with respect to channel length down to $0.1{\mu}m$ technology is considered. It is analyzed that l/f noise in FD n-channel Double Gate SOI MOSFET is due to both carrierdensity fluctuations and mobility-fluctuations. But controversy still exits to its origin.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.235-237
• /
• 1999

This paper has proposed a method to estimate effective length of a 30 KVA super-conducting generator using 3-dimensional FEM program. Flux linkage of the stator coil is calculated by the FEM program and the induced voltage is computed using the simple Faraday's law.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.238-240
• /
• 1998

This paper deals with the design of a disk-type motor excited by permanent magnets. The main flux is oriented in the axial direction, yielding a pan cake type arrangement. the outer diameter is about 65mm, inner diameter is about 30mm, the axial length about 15mm. For reduce axial length and high efficiency, motor winding have been etched copper plate. After the introduction, the motor design is explained and characteristic of axial flux permanent magnet motor have been investigated. A prototype AFPM motor have been assembled and driving power supply are made. A characteristic of magnetical and electrical and characteristic are investigated.