• 한국재료학회지
• /
• 제15권3호
• /
• pp.202-208
• /
• 2005

The surface states of gate dielectrics affect device performance severely in Pentacene OTFTs. We have fabricated organic thin-film transistors (OTFTs) using pentacene as an active layer with chemically modified $SiO_2$ gate dielectrics. The effects of the surface treatment of $SiO_2$ on the electric characteristics of OTFTS were investigated. The surface of $SiO_2$ gate dielectric was treated by normal wet cleaning process, $O_2-plasma$ treatment, hexamethyldisilazane (HMDS), and octadecyltrichlorosilane (OTS) treatment. After the surface treatments, the contact angles and surface free energies were measured in order to analyze the surface state changes. In the electrical measurements, typical I-V characteristics of TFTs were observed. The field effect mobility, $\mu$, was calculated to be $0.29\;cm^2V^{-1}s^{-1}$ for OTS treated sample while those for the HMDS, $O_2$ plasma treated, and wet-cleaned samples were 0.16, 0.1, and $0.04\;cm^2V^{-1}s^{-1}$, respectively.

• 한국인터넷방송통신학회논문지
• /
• 제20권3호
• /
• pp.37-41
• /
• 2020

본 논문에서는 도시 내부의 통신 인프라가 파괴된 환경에서 DTN(Delay-Tolerant Network) 노드 간 메시지 전송 효율을 향상시키기 위한 라우팅 방법을 제안하였다. 또한 일정 규모의 통신 인프라가 기능을 할 수 없는 상황에서 향상된 노드 간 메시지 전송 과정을 설명하였다. 노드 간 신뢰성 향상을 위한 효과적인 라우팅 방법을 제안하고 DTN 시뮬레이터를 이용하여 평가하였다. 통신 인프라의 파괴로 인한 불확실한 경로 상에서 노드 간 메시지 전송 관계를 고려하여 도시 지역에서 신뢰성이 개선된 라우팅 알고리즘을 시뮬레이션으로 확인하였다. 노드가 과거에 경험한 모든 접촉 정보를 포함하는 라우팅 알고리즘을 사용하여 통신 인프라가 파괴된 상황의 메시지를 전달 시뮬레이션에서 기존 라우팅 알고리즘 보다 비교적 좋은 결과를 얻을 수 있었다.

• 마이크로전자및패키징학회지
• /
• 제22권1호
• /
• pp.35-41
• /
• 2015

In this study, in order to improve the reliability of ACF interconnections, solder ACF joints were investigated interms of solder joint morphology and solder wetting areas, and evaluated the electrical properties of Flex-on-Board (FOB) interconncections. Solder ACF joints with the ultrasonic bonding method showed excellent solder wetting by broken solder oxide layers on solder surfaces compared with solder joints with remaining solder oxide layer bonded by the conventional thermo-compression (TC) bonding method. When higher target temperature was used, Sn58Bi solder joints showed concave shape due to lower degree of cure of resin at solder MP by higher heating rate. ACFs with epoxy resins and SAC305 solders showed lower degree of resin cure at solder MP due to the slow curing rate resulting in concave shaped solder joints. In terms of solder wetting area, solder ACFs with $25-32{\mu}m$ diameters and 30-40 wt% showed highest wetted solder areas. Solder ACF joints with the concave shape and the highest wetting area showed lower contact resistances and higher reliability in PCT results than conventional ACF joints. These results indicate that solder morphologies and wetting areas of solder ACF joints can be controlled by adjustment of bonding conditions and material properties of solder and polymer resin to improve reliability of ACF joints.

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2396-2400
• /
• 2007

Transparent In-doped (1 at.%) zinc oxide (IZO) thin films are deposited by pulsed DC magnetron sputtering with H2 mixed Ar atmosphere on glass substrate without any heating process. Even at room temperature, highly c-axis oriented IZO thin films were grown in perpendicular to the substrate. The hydrogenated IZO (IZO:H) film isolated in H2 atmosphere for 30 min exhibited an average optical transmittance higher than 85% and low electrical resistivity of less than 2.7 × 10?3 Ω·cm. These values are comparable with those of commercially available ITO. Each of the IZO films was used as an anode contact to fabricate organic light-emitting diodes (OLEDs) and the device performances studied. At the current density of 1 × 103 A/m2, the OLEDs with IZO:H (H2) anode show excellent efficiency (11 V drive voltage) and a good brightness (8000 cd/m2) of the light emitted from the devices, which are as good as the control device built on a commercial ITO anode.

• 한국결정성장학회지
• /
• 제6권2호
• /
• pp.263-274
• /
• 1996

타이타늄 옥사이드층을 태양전지의 표면 보호막으로 사용시, 그 적합성에 대해 조사하였다. 스프레이법으로 형성된 타이타늄 옥사이드의 박막층은 태양전지 제조 과정중 사용되는 화학약품에 잘 견디며, 이 층을 사용함으로서 고온산화공정을 줄일 수 있다.

• 대한전자공학회논문지SD
• /
• 제45권7호
• /
• pp.1-8
• /
• 2008

본 논문에서는 플라스틱 기판에 OTFT를 스위칭 소자로 사용하여 유연한 EPD 패널을 제작하였다. OTFT의 채널 폭과 길이의 비(W/L)는 EPD의 응답속도를 고려하여 15이상으로 설계를 하였다. 게이트전극은 Al, 절연층은 cross-linked PVP, 반도체층은 펜타센, 중간층은 PVA/Acryl를 사용하였다. 플라스틱 기판은 보호층 처리를 통하여 열처리 공정 시 발생하는 입자를 제거하였고, 거친 표면을 평탄화하였다. 반도체층의 크기는 게이트 전극 보다 작도록 제한하여 누설전류를 줄일 수 있었다. EPD-상판과 OTFT-하판 사이에 픽셀전극을 삽입하고 또한 OTFT-하판을 보호하기 위하여 PVA/Acryl로 구성된 중간층을 상빙하였다. 완성된 OTFT-하판에서 OTFT의 이동도는 $0.21cm^2/V.s$, 전류점멸비(Ion/Ioff)는 $10^5$ 이상의 성능을 보였다.

• 대한전자공학회논문지
• /
• 제26권6호
• /
• pp.48-56
• /
• 1989

밀착형 1차원 영상감지소자로서 팩시밀리에 사용될 광도전막을 사일랜듸 글로방전 분해법으로 제작하였다. 우선 rf전력, 사일랜유량, 분위기 가스압, $H_2/SiH_4$비 및 기판온도의 증착조건에 따른 단층광전도막의 전기적 및 광학적특성을 조사하였다. 이 단층구조 영상감지막은 광전감도 0.85와 100lux 조도하에서 $I_{ph}/I_d=100$을 나타내었다. 그러나 이러한 단층박막은 양 전극으로 부터의 캐리어주입으로 인해 큰 암전류도 0.2nA 이하를 나타내었다. 또한 다층막은 단층막에 비해 단파장 가시광영역이 보상되어 팩시밀리용 1차원 영상감지소자에 사용될 만한 결과를 나타내었다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권1호
• /
• pp.39-46
• /
• 2008

The end plates of fuel cell assemblies are used to fasten the inner stacks, reduce the contact pressure, and provide a seal between Membrane-Electrode Assemblies (MEAs). They therefore require sufficient mechanical strength to withstand the tightening pressure, light weight to obtain high energy densities, and stable chemical/electrochemical properties, as well as provide electrical insulation. The design criteria for end plates can be divided into three parts: the material, connecting method, and shape. In the past, end plates were made from metals such as aluminum, titanium, and stainless steel alloys, but due to corrosion problems, thermal losses, and their excessive weight, alternative materials such as plastics have been considered. Composite materials consisting of combinations of two or more materials have also been proposed for end plates to enhance their mechanical strength. Tie-rods have been traditionally used to connect end plates, but since the number of connecting parts has increased, resulting in assembly difficulties, new types of connectors have been contemplated. Ideas such as adding reinforcement or flat plates, or using bands or boxes to replace tie-rods have been proposed. Typical end plates are rectangular or cylindrical solid plates. To minimize the weight and provide a uniform pressure distribution, new concepts such as ribbed-, bomb-, or bow-shaped plates have been considered. Even though end plates were not an issue in fuel cell system designs in the past, they now provide a great challenge for designers. Changes in the materials, connecting methods, and shapes of an end plate allow us to achieve lighter, stronger end plates, resulting in more efficient fuel cell systems.

• Smart Structures and Systems
• /
• 제22권2호
• /
• pp.133-137
• /
• 2018

Increasing interest in prognostics and health management has heightened the need for wireless sensor networks (WSN) with efficient power sources. Piezoelectric energy harvesters using Pb(Zr,Ti)O3 (PZT) are one of the candidate power sources for WSNs as they efficiently convert mechanical vibration energy into electrical energy. These types of devices are resonated at a specific frequency, which has a significant impact on the amount of energy harvested, by external vibration. Hence, precise prediction of mechanical deformation including modal analysis of piezoelectric devices is crucial for estimating the energy generated under specific conditions. In this study, an experimental vibrational system capable of controlling a wide range of frequencies and accelerations was designed to generate mechanical vibration for piezoelectric energy harvesters. In conjunction with MATLAB, the system automatically finds the resonance frequency of harvesters. A small accelerometer and non-contact laser displacement sensor are employed to investigate the mechanical deformation of harvesters. Mechanical deformation under various frequencies and accelerations were investigated and analyzed based on data from two types of sensors. The results verify that the proposed system can be employed to carry out vibration experiments for piezoelectric harvesters and measurement of their mechanical deformation.

• 대한화학회지
• /
• 제7권1호
• /
• pp.17-24
• /
• 1963

本硏究에서는 韓國産 灰重石($CaWO_4$)에 關하여 固相一液相界面에 있어서의 電氣化學的 性質을 電氣泳動法으로 調査하고 한便 浮遊性에 關하여서는 捕收劑로 Dodecyl ammonium chloride(D.A.C.라 略稱)와 Sodium dodecyl sulfate(S.D.S.라 略稱)를 使用하여 Hallimond tube 試驗, 接觸角測定 及 吸着量測定等의 捕收劑 이온이 鑛物表面에 吸着하는데 있어서 電氣的인 相互作用이 重要한 役割을 하고 있다는 것을 實證하였다. 卽 電氣泳動法으로 鑛粒의 水溶液中에 있어서의 mobility를 測定한 結果 灰重石의 境遇에는 $Ca^{++}$ 或은 $WO_4^{--}$이 界面 電氣特性을 決定하는 potental determining ion이라는 것이 確認되었고 水溶液中에 있는 $Ca^{++}$의 增加는 鑛粒界面의 陰電荷를 減少하며 $WO_4^{--}$의 增加는 그 陰電荷를 增加한다는 것을 알수 있다. 이와같은 表面에 "陰이온系"의 S.D.S. 或은 "陽이온系"의 D.A.C.를 作用시키면 當然히 S.D.S.는 $Ca^{++}$의 增加에 따라 吸着量이 增加되어 浮遊性이 增大되고 한便 D.A.C. 때는 反對로 $WO_4^{--}$이 增加하는데 따라 吸着量이 增加되며 따라서 浮遊性도 增大된다고 불수 있고 實地로 捕收劑吸着量의 測定 및 Hallimond tube 實驗은 이것을 立證하고 있다. 이러한 基礎的인 究明은 灰重石浮選理論의 根幹이 되는 것이고 從來의 浮選法 改良에 對한 指針이 될수 있다고 生覺한다.