• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.358-361
• /
• 1999

This paper describes on the fabrication and characteristics of hot-film type micro-flowsensors integrated with Pt-RTD\`s and micro-heater on the Si substrate, in which MgO thin-films were used as medium layer in order to improve adhesion of Pt thin-films to SiO$_2$ layer The MgO layer improved adhesion of Pt thin-films to SiO$_2$` layer without any chemical reactions to Pt thin-films under high as gas flow rate and its conductivity increased due to increase of heat-loss from sensor to external. Output voltage was 82 mV at N2 flow rate of 2000 sccm/min, heating power of 1.2W. The respons time was about 100 msec when input flow was step-input

• 감성과학
• /
• 제24권2호
• /
• pp.65-74
• /
• 2021

최근 ICT 산업의 기술혁신이 일어남에 따라 생체신호을 인식하고 이에 대해 대응을 하기 위한 웨어러블 센싱 장치에 대한 수요가 증가하고 있다. 이에 따라 본 연구에서는 단순한 함침과정을 통해 3차원 스페이서(3D spacer)직물을 단일벽 탄소나노튜브(SWCNT)분산용액에 함침공정을 진행해 단일층(monolayer) 압전 저항형 압력 센서(piezoresistive pressure sensor)를 개발하였다. 3D 스페이서 원단에 전기전도성을 부여하기 위해 시료를 SWCNT 분산용액에 함침공정을 진행한 후 건조하는 과정을 거쳤다. 함침된 시료의 전기적 특성을 파악하기 위해 UTM (Universal Testing Machine)과 멀티미터를 이용해서 압력의 변화에 따른 저항의 변화를 측정하였다. 또한 센서의 전기적 특성의 변화를 관찰하기 위해 분산용액의 농도, 함침횟수, 시료의 두께를 다르게 해서 시료의 센서로서의 성능을 평가했다. 그 결과 wt0.1%의 SWCNT 분산용액에 함침공정을 2번 진행한 시료가 센서로서 가장 뛰어난 성능을 나타냄을 알 수 있었다. 두께별로는 7mm 두께의 센서가 가장 높은 GF를 보이고 13mm 두께의 센서가 작동범위가 가장 넓음을 확인했다. 본 연구를 통해 3D spacer 원단으로 제작한 스마트 텍스타일 센서는 공정과정이 단순하면서도 센서로서 성능이 뛰어나다는 장점을 확인할 수 있었다.

• 전기학회논문지
• /
• 제67권3호
• /
• pp.406-412
• /
• 2018

This paper describes the fabrication process of laser induced graphene (LIG) and its transfer method on to a flexible and stretchable PDMS substrate. By irradiating CO2 laser on a polyimide(PI) film surface, a localized high temperature is created, resulting in a three-dimensional porous graphene network structure with good conductivity. This LIG electrode is relatively easy to fabricate and since it is very weak the LIG electrode was transferred to a flexible PDMS substrate to increase the sturdiness as well as possible use in flexible applications. Sheet resistance, thickness, and electrochemical activity of the fabricated in-situ LIG electrodes have been examined and compared with the LIG electrodes after transferring to PDMS elastomer. The properties of the LIG electrodes were also examined depending on the $CO_2$ laser power. As the irradiated laser power increased, the LIG electrode resistance decreases and the LIG electrode thickness increased. At 4.8 W of laser power, the average sheet resistance and thickness of the fabricated LIG electrodes were approximately $31.7{\Omega}/{\Box}$ and $62.67{\mu}m$, respectively. Moreover, the electrochemical activity of the fabricated LIG electrode at 4.8 W of laser power showed a high oxidation current of $28.2{\mu}A$ after transferring to PDMS.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.1-10
• /
• 2018

Wide-area monitoring of tree-related high impedance fault (THIF) efficiently contributes to increase reliability of large-scaled network, since the failure to early location of them may results in critical lines tripping and consequently large blackouts. In the first place, this wide-area monitoring of THIF requires managing the placement of sensors across large power grid network according to THIF detection objective. For this purpose, current paper presents a framework in which sensors are distributed according to a predetermined risk map. The proposed risk map determines the possibility of THIF occurrence on every branch in a power network, based on electrical conductivity of trees and their positions to power lines which extracted from spectral data. The obtained possibility value can be considered as a weight coefficient assigned to each branch in sensor placement problem. The next step after sensors deployment is to on-line monitor based on moving data window. In this on-line process, the received data window is evaluated for obtaining a correlation between low frequency and high frequency components of signal. If obtained correlation follows a specified pattern, received signal is considered as a THIF. Thereafter, if several faulted section candidates are found by deployed sensors, the most likely location is chosen from the list of candidates based on predetermined THIF risk map.

• 한국재료학회지
• /
• 제21권3호
• /
• pp.133-137
• /
• 2011

Gold have been used as an electrode materials having a good mechanical flexibility as well as electrical conductivity, however the stretchability of the gold on a flexible substrate is poor because of its small elastic modulus. To overcome this mechanical inferiority, the reinforcing gold is necessary for the stretchable electronics. Among the reinforcing materials having a large elastic modulus, carbon nanotube (CNT) is the best candidate due to its good electrical conductivity and nanoscale diameter. Therefore, similarly to ferroconcrete technology, here we demonstrated gold electrodes mechanically reinforced by inserting fabrics of CNTs into their bodies. Flexibility and stretchability of the electrodes were determined for various densities of CNT fabrics. The roles of CNTs in resisting electrical disconnection of gold electrodes from the mechanical stress were confirmed using field emission scanning electron microscope and optical microscope. The best mechanical stability was achieved at a density of CNT fabrics manufactured by 1.5 ml spraying. The concept of the mechanical reinforced metal electrode by CNT is the first trial for the high stretchable conductive materials, and can be applied as electrodes materials in various flexible and stretchable electronic devices such as transistor, diode, sensor and solar cell and so on.

• 전기전자학회논문지
• /
• 제26권2호
• /
• pp.219-225
• /
• 2022

우리나라의 섬유산업 중 염색가공 분야는 에너지 다소비 업종으로, 노동 집약적 특성에 따라 원단위 생산성이 낮고, 대부분 중소·영세기업 특징이 있다. 염색 원단의 불량률이 높아지면 재염색으로 인한 생산단가 상승과 초과 에너지 투입으로 비용이 증가하기 때문에, 불량률을 최소를 통한 생산량 향상이 초점이었다. 또한 고온고압의 환경에서 이루어지는 염색공정은 사고 위험으로 염색기 원단 투입구를 실시간으로 개방할 수 없기 때문에 실시간으로 원단의 염색상태 확인이 어려웠다. 최근에는 염액을 실시간으로 모니터링하는 연구가 활발히 진행중이다. 본 논문에서는 탁도, pH, 전도도 센서를 이용하여 염액의 흡진율을 계측할 수 있는 복합센서 흡진율 모델 및 구성시스템을 제안하였으며, 실험방법소개와 실험결과 분석을 실시하였다.

• 센서학회지
• /
• 제5권3호
• /
• pp.75-85
• /
• 1996

본 논문에서는 실시간으로 수질을 감시하기 위한 온라인 감시시스템을 개발하였다. 개발된 시스템은 중앙 감시 제어부, 데이타 수집기 및 단위 오염 성분 측정기들로 구성되며, 이들을 계층적인 구조로 체계적으로 결합시켜 융통성과 확장성을 가지도록하여 효율적인 데이타 수집 및 관리가 이루어지도록 하였다. 또한 수질측정의 기본이 되는 물의 염도, 전기전도도, 온도, 용존산소량 및 대장균 측정기를 원격 무인 측정이 가능하도록 설계 제작하였다.

• 전기학회논문지
• /
• 제65권8호
• /
• pp.1430-1435
• /
• 2016

Electrical impedance tomography (EIT) has been applied to measure the location of external disturbance using a phantom and conductive yarns. According to the test results, the addition of carbon nanotube particles into the phantom does not show remarkable improvement in location errors. On the other hand combined fabric, conductive yarns with fabric, and non-woven fabric, were added to evaluate its performance as a fabric sensor. The combined fabric resulted in a decrease of 21.5% in the circumferential location error and a decrease of 50% in the radial location error, compared to those of the yarns. Additionally, it was revealed that the measurement error is almost linearly proportional to the conductivity of the phantom liquid and resistance of the conductive yarns. The combined fabric can be a promising material for fabric sensors in sports utilities and medical devices.

• 센서학회지
• /
• 제1권1호
• /
• pp.93-100
• /
• 1992

이트리아 안정화(安定化) 지르코니아(92 mole% $ZrO_{2}$+8 mole% $Y_{2}O_{3}$)에 0.5 mole% $SiO_{2}$와 $0{\sim}2.0{\;}mole%{\;}Al_{2}O_{3}$가 첨가된 소결체의 소결성, 기계적 및 전기적 성질에 대하여 조사하였다. 소결밀도(燒結密度)는 0.5 mole% $Al_{2}O_{3}$가 첨가되었을 때 가장 높게 나타났으며 1.5 mole%이상 $Al_{2}O_{3}$가 첨가됨에 따라 감소하는 경향을 나타내었다. 비커스 경도(硬度)는 소결밀도(燒結密度)에 비례하여 나타났으며, 0.5 mole% $Al_{2}O_{3}$가 첨가되었을 때 가장 높은 전도성을 나타내었다. 일정한 산소분압(酸素分壓)에 따른 기전력 측정에서도 0.5 mole% $Al_{2}O_{3}$가 첨가되었을 매 가장 높았다. 제작된 산소(酸素)센서들의 응답특성(應答特性) 결과에서 $SiO_{2}$와 $Al_{2}O_{3}$가 각각 0.5 mole% 첨가된 센서의 응답특성이 가장 좋았다.

• 한국응용과학기술학회지
• /
• 제13권3호
• /
• pp.105-109
• /
• 1996

It is well known that the metallo- phthalocyanine (MPcs) are sensitive to toxic gaseous molecules such as $NO_2$ and also chemically and thermally stable, Therefore, lots of MPcs have been studied for the potential chemical sensor for $NO_2$ gas using quartz crystal microbalance(QCM) or electrical conductivity. In this study, ultra-thin films of octa(2-ethylhexyloxy)copper-phthalocyanine were prepared by Langmuir-Blodgett method and characterized by using UV-VIS absortion spectroscopy and ellipsometry. Transfer condition, and characterization of LB films were investigated and preliminary results of current-voltage(I-V) characteristics of these films exposed to $NO_2$ gas as a function of film thickness and temperature were discussed.