• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.1 no.1
• /
• pp.26-39
• /
• 2002

This paper describes design and implementation of home network control protocol for networked home appliances. The proposed network protocol has four-layered protocol structure and device-modem interface structure for the flexibility of modems based on power line communication. The standard message set is specified to guarantee the interoperability between various home appliances The proposed protocol can be easily implemented because it has minimum network overhead.

• Journal of Industrial Technology
• /
• v.24 no.A
• /
• pp.83-90
• /
• 2004

Generally, electronic appliances are used on the basis of normal power source supply. The power source inevitably includes the abnormal condition, such as, sudden voltage sagging, power interrupt, and induced noises. As the electronic appliances which include micro-controller-based circuits are being increased recently, the controller circuit sometimes malfunctions by the abnormal condition of the power source. This situation causes serious problems such as hitch of electric appliance, fire and medical instrument glitch, which produces serious situations. In this paper, development of power interrupt tester which is highly suitable for an endurance test device under abnormal power source to microprocessor-based circuits is proposed 89C2051 microcontroller is performed to make power interrupt signal, and software controls peripheral hardwares and built-in functions. Experimental results of this study will offer a good application to electronic appliance maker as a test device of hardware and software debugging use.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.2
• /
• pp.144-149
• /
• 2016

This paper presents a power control method of high-speed single-phase BLDC motor. Most electric appliances require a power factor corrector (PFC) to mitigate grid current harmonics. However, the reactive components and power semiconductors in the PFC increase system cost and dimension. In this paper, a new motor drive system for a high-speed single-phase BLDC motor is proposed, which can decrease grid current harmonics without PFC by directly manipulating motor power and eliminating bulky electrolytic dc-link capacitor. Given that the proposed motor power control method does not require motor current controller, no current sensor is necessary. Moreover, the proposed algorithms can be easily implemented using a low-cost micro-controller. The effectiveness of the proposed power control method is verified by experiments.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.19-26
• /
• 2001

There passed almost 15 years since our sound quality studies in Japan related to the emitted noise from the industrial products have been started. The sound under consideration are interior and exterior noise from cars, noise from the electric appliances such as electric shavers, electric cleaners and washing machines and the sound emitted from earth moving machines and etc. After a little while since sound quality studies have been started, the products with better sound are gradually on sale on the market.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.228-231
• /
• 2015

Recently, the electric power consumption concentrated in specific seasons and time causes the unstable power supply. To resolve this problem, smart grid has emerged as an alternative to consume the power, efficiently. Smart grid that combines ICT with the existing electrical grid includes demand response as a core technology. Demand response enable the power consumption effectively by offering a variety of informations, such as power consumption, charges expected, etc., for consumers who voluntarily participate in the electricity markets. In this paper, we design the automatic demand response systems based on SEP 2.0 for the efficient power control of home appliances in the smart grid environments.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.4
• /
• pp.300-306
• /
• 2011

In this paper, we suggest a usage profiles for electric home appliances. In Korea, it is published the records for total consumption of electricity in a house but the electric home appliance consumption records in a households are not. To build the data, we must collect the usage of every appliances in a house and the information of the household which live in the house. Unfortunately, it is hard to get the data because of the worry about the breach of privacy. In this paper, we make a scenarios on the electricity consumption pattern of a few households type. Based on the conjecture, we make the power consumption profiles for some home appliances. Comparison to the total electric consumption records for a house, we found our scenarios are quite reasonable.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.5
• /
• pp.638-644
• /
• 2010

This paper presents ideas of service scenarios for home residents using electric power monitoring system per appliance, the implementation of the monitoring system, and analysis of acquired electric power usage pattern. By acquiring and analyzing electric power usage pattern, home residents can get information of power usage pattern of every legacy (non-Demand Response-ready) appliance. Further they can get pieces of recommendation how to reduce energy consumption, intelligent standby power blocking service, and alarming service to abnormality of appliances. In order to check the feasibility of the ideas, a system that can acquire electric power pattern per appliance is implemented, and electric power pattern of some appliances are stored to a database and it was analyzed to show if auto-identification of a type of a device is possible, which is a basic required function for the scenarios presented.

• Journal of Environmental Health Sciences
• /
• v.23 no.1
• /
• pp.55-61
• /
• 1997

This study was executed for the purpose of investigation of the EMFs exposures of personal and electronic environment. This study examines ELF-EMFs of electric appliances, subways and occupational and non-occupational human exposures, using EMDEX II (for 40 - 800Hz, Enertech Consultant, Inc.), from October 1995 to March 1996. Among the electric appliances examined, a massage unit showed the highest mean value of 247.07 $\mu$T, followed by an electric blanket of 5.24 $\mu$T. Indoor levels of EMF in subways exceerlcd 0.2 $\mu$T of the Swedish Guideline. The mean personal exposure levels of occupational group were 0.18 $\mu$T, while the personal EMF level of non-occupational group were 0.07 $\mu$T. Occupational group were exposed more highly while at work. However, the EMF levels during nonwork and sleep exposures between occuptional group and nonoccupational group were about the same. Estimates of time-intergrated exposure indicated that utility-specipic job classifications received about one-half or more of their total exposure on the job. Finally, this study would provide significant data for future research for exposure to magnetic fields, and more detailed study and research are necessary.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.208-213
• /
• 2008

In recent society, the quality of human life has improved due to the use of electric appliances and the high powered electrical equipments. However, lots of electric appliances and equipments generate the electromagnetic field hazard. Many studies have been made about the wrong behavior of machines due to electromagnetic fields, the interferences in communication equipments, the possibility of the electromagnetic field hazard in human body, etc. There exist international standards about the RF equipments (ex. mobile phone, antenna, etc.). But, many researchers involved in power frequency electric and magnetic field only propose the prudential avoidance. In this paper, induced currents in a human body model due to magnetic fields in high speed railway are calculated by two dimensional impedance method. Power frequency(60Hz) magnetic fields are calculated and induced currents are simulated by Faraday's law. Induced currents are simulated with induced voltage, human body model impedances due to Ohm's law, magnetic fields derived from Biot-Savart's law and Transmission Line Method in high speed railway.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1908-1910
• /
• 1997

The electric and magnetic fields (EMFs) near 345/154 kV overhead transmission lines were measured. The average values of maximum electric field and magnetic field for 44 transmission lines were 1.11 kV/m and 24.5 mG, respectively. These values were lower than any standards of advanced countries. The EMFs of distribution lines and substation, and electric appliances were also measured and compared with those of transmission lines.