• 한국인터넷방송통신학회논문지
• /
• 제12권1호
• /
• pp.173-179
• /
• 2012

본 연구에서는 국내 T-DMB 시스템에서 대역통과필터 기능을 수행 하는 cavity 필터를 설계하고자 HFSS 툴을 사용하여 그 특성을 시뮬레이션 하였으며, 이를 활용하여 필터를 제작하여 측정한 특성을 시뮬레이션 결과와 비교하였다. 전자계 3D 시뮬레이션 Tool인 HFSS를 사용하여 cavity 필터를 시뮬레이션 하는 것은, 실제로 필터를 제작하기 전에 성능을 미리 점검함으로서 최적화된 모델을 구축하여 시간과 비용을 최대한 절약할 수 있도록 하는 것이다. 원통형 도파관의 특성을 파악하여 필터의 최적의 조건들을 얻도록 연구하였으며, 이를 바탕으로 HFSS 시뮬레이션 및 제작을 하여 특성을 측정하여 설계값과 비교하였다.

• 한국세라믹학회지
• /
• 제49권4호
• /
• pp.385-396
• /
• 2012

Thermal shock test methods and thermal shock parameters for ceramics were reviewed from the following viewpoints: (1) The test methods should be based on the precise estimation of both temperature and thermal stress distributions in a specimen taking into account the temperature-dependent thermo-mechanical properties; (2) The thermal shock parameters must be defined as a physical property of the materials and described as a function of temperature at the fracture point of the specimen; (3) The relation between the strength and fracture toughness of brittle ceramics under a thermal shock load must be the same as the relation under a mechanical load. In addition, appropriate thermal shock parameters should be defined by the thermal shock strength and thermal shock fracture toughness based on stress and energy criteria, respectively. A constant heat flux method is introduced as a testing technique suitable for estimating these thermal shock parameters directly from the electric power charged.

• 한국공작기계학회논문집
• /
• 제15권1호
• /
• pp.56-62
• /
• 2006

An experimental investigation was performed to study the characteristics of ER(Electro-Rheological) fluid flow in a horizontal rectangular tube with or without D.C voltage. To determine some characteristics of the ER flow, 2D PIV(Particle Image Velocimetry) technique is employed for velocity measurement. This research found the mean velocity distribution with 0kV/mm, 1.0kV/mm and 1.5kV/mm for Re = 0, 0.62, 1.29 and 2.26. When the strength of the electric field increased, the cluster of ERF are clearly strong along the test tube and the flow rate decreased. In this study, the rheology of ER fluid stagnating or flowing through a dispersion meter will be investigated by PIV method. And then the ER effect, which appears at the ER valves and their appliance will be visualized.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.195-200
• /
• 2003

An electric vehicle uses the system to a power source whether it limps a high efficiency, without environmental pollution It coincides the best at the 21th century environmental regulation and energy frugality. The motor control system using DC-DC converter is carried out in this study. The Present control system is structured the better condition than that of the AC-DC converter with DC-AC inverter. Further, a vehicle dynamics analysis is peformed for the case of Mini-Baja it is found that the analysis dynamic system for the Mini-Baja gives a good design parameters.

• 한국공작기계학회논문집
• /
• 제10권4호
• /
• pp.84-90
• /
• 2001

The electro-reheoligical(ER) effect refers to the abrupt change in viscosity in certain suspensions on application of an electric field. This paper presents experimental results on material properties of an ER fluids subjected to electrical fatigues. As a first step, two types of EF fluids are made of arabic gum and methyl cellulose(MC) choosing 25% of parti-cle weight-concentration. Following the construction of test mechanism for electrical durability of ER fluid, the dynamic yield shear stress and current density of the ER fluids are experimentally distilled as a function of electric field. The yield shear stress of operated ER fluids are distilled and compared with those of unused ER fluids.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.41-47
• /
• 2007

The structure of ER valve is simple that its designing and manufacturing are easy. The flow rate and pressure of ER fluids flowing in the ER valve are controlled only by electric field. In this study a three port ER valve is designed and manufactured. Then, the flow rate and pressure dorp of ER fluids flowing in the ER valve are measured. The system proposed controls flow rate and pressure fast. So, this system can be easily substituted for the existing hydaulic and pneumaitc control system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.974-979
• /
• 2007

From '1994 Gwacheon accident of the Electric Multiple Unit(EMU)' till '2004 Seoul subway 2 lines Guui station accident', the accident is increasing at day and the service demand of the citizen is coming to be various. But it does not deal with technical or operation side demands. There is a possibility of saying that the accident of the EMU or deficit operation is caused by the RCM. The EMU where the efficiency is good though does the time passes and it becomes old anger and does not display that efficiency not only the cause of formation accident does becomes. The breakdown about under occurring before getting up an accident, appropriately shifting the parts is to a maintenance very the pending question fact which is important is a possibility of doing. From there is by an EMU, RCM in reliability base grudge is a tool of confirms an improvement point and the place where it judges. From the research which it sees will present about technical development plan of RCM.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1-5
• /
• 2007

An electric motor unit (EMU) is manufactured from a large number of components and parts which are made of extensive raw materials. In emits much environmental load throughout its entire life cycle, having both complicated and elaborated system and long period of life time. Therefore, it is necessary to investigate the methodologies and tools to analyze the environmental performance of EMUs throughout their life cycle. RACE (Rail Assessment for Clean Environment) developed in this study is the software that can analyze the environmental impacts and eco-efficiency of EMUs, which are new concepts proposed for sustainable development. It has database for main components as well as principal materials contained in EMUs. Manufacturers and operators can use it to assess the life-cycle environmental impacts of EMU and support their decision making. RACE can also be used as a tool for environmental communication between manufacturers and operators.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.393-398
• /
• 1999

The temperature dependence of the viscosity was determined for an electrorheological(ER) fluid consisting of 35 weight% zeolite particles in hydraulic oil 46cSt. Thermal activation analysis were performed by changing the ER fluid's temperature from -1$0^{\circ}C$ to 5$0^{\circ}C$ at fixed electric field. According to the analysis, the activation energy for flow was about 79.64kJ/mole at E=0kV/mm. Generally, the hydraulic oil 46cSt will be operated at the temperature of about 4$0^{\circ}C$, the ER fluid's electric field dependence of viscosities were investigated at this temperature. also, the influence of adding the dispersant(Carbopl 940) on electrorheological effect of the ER fluid was discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.472-475
• /
• 2003

In this paper, insulating varnish has been used for field magnet and armature impregnated insulating material of electric locomotive and traction motor. When it was duplicated coating, it could be accuse internal void, and which could change electrical characteristics. We used to boundary elemental method of simulation tool, and improved optimal insulating design of insulating varnish according to measuring electric distribution in void of specimen.