• 한국기계가공학회지
• /
• 제20권12호
• /
• pp.54-64
• /
• 2021

Electric vehicles use lithium-ion battery packs as the power supply, where the batteries are connected in series or parallel. The temperature control of each battery is essential to ensure a consistent overall temperature. This study focused on reducing ohmic heating caused by batteries to realize a uniform battery temperature. The battery spacing was optimized to improve air cooling, and the tilt angle between the batteries was varied to optimize the internal structure of the batterypack. Simulations were performed to evaluate the effects of these parameters, and the results showed that the optimal scheme effectively achieved a uniform battery temperature under a constant power discharge. These findings can contribute to future research on cooling methods for battery packs.

• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1740-1749
• /
• 2009

디지털 컨버전스로 대표되는 모바일 기기의 진화에 따라 카메라, MP3, TV, 게임기 등의 기능이 휴대폰에 탑재되었으며, 이에 따른 모바일 기기의 소비전력 증가는 차세대 초고용량 리튬이온전지의 개발을 촉진시키고 있다. 또한 환경 규제 및 유가 상승으로 인하여 하이브리드 자동차에 대한 수요가 증가하고 있고, 이에 따라 중대형 전지에 대한 관심이 집중되면서 전지의 저가격화, 고출력화, 고안전화를 이루기 위한 노력이 계속되고 있다. 본 연구에서는 리튬이온전지 패킹에 관한 기술로서 공정축소 및 생산성을 향상시킬수 있고 전지본체 CELL을 제외한 나머지 부품을 재활용 할 수 있는 특허기술을 제시하였다. 보호회로가 탄성적으로 부착된 리튬이온전지 팩은 보호회로와 전지본체의 순간적인 단락을 방지하고, 보호회로와 전지본체의 전기적인 연결을 용이하게 수행할 수 있도록 탄성적으로 부착된 전지 팩을 제공한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.868-869
• /
• 2011

Domestic Foreign automaker's are focused on the high-efficiency, low emission cars development. On the way, the hybrid car is the first priority. Hybrid electric vehicle battery pack configurations, EV Relay one of the key components of the engine driving, to assist in the drive motor to supply electrical energy to the battery is a device for opening and closing of the output device. EV Relay determine the longevity and the replacement cycle, The EV Relay environmental conditions and duty cycle considering the reliability tests are essential requirements of many automotive companies to respond to RFQ, this test is essential. This paper using Maxwell Software for Prediction of the Ev Relay impulse, the theoretical data to obtain the impulse to develop methods for mechanical testing after to take advantage of it.

• 한국항공우주학회지
• /
• 제50권12호
• /
• pp.819-828
• /
• 2022

본 연구는 일반적인 쿼드 틸트 로터 타입의 전기 추진 수직이착륙 항공기에 대하여 배터리의 성능에 따른 기체 사이징의 민감도를 분석하였다. Uber Elevate와 NASA가 제시한 임무 요구도를 기반으로 초기 기체 사이징을 수행하였으며, 200Wh/kg~400Wh/kg의 배터리 팩 기준 비에너지와 4C~5C의 연속 방전율 범위에 대하여 항공기의 총 중량은 5,000lb~11,000lb으로 예측되었다. 기체 총 중량을 7,000lb를 가정 시 가용 출력과 가용 에너지 측면에서 각각 요구되는 배터리 사양을 도출하였으며, 배터리 비에너지와 방전율의 영향을 분석하였다. 배터리 팩 고장 및 프롭 로터 고장과 같은 조건을 고려하여 배터리 최대 방전율 또한 제시하였다.

• Journal of Power Electronics
• /
• 제11권4호
• /
• pp.408-417
• /
• 2011

The plug-in hybrid electric vehicles (PHEVs) are specialized hybrid electric vehicles that have the potential to obtain enough energy for average daily commuting from batteries. The PHEV battery would be recharged from the power grid at home or at work and would thus allow for a reduction in the overall fuel consumption. This paper proposes an integrated power electronics interface for PHEVs, which consists of a novel Eight-Switch Inverter (ESI) and an interleaved DC/DC converter, in order to reduce the cost, the mass and the size of the power electronics unit (PEU) with high performance at any operating mode. In the proposed configuration, a novel Eight-Switch Inverter (ESI) is able to function as a bidirectional single-phase AC/DC battery charger/ vehicle to grid (V2G) and to transfer electrical energy between the DC-link (connected to the battery) and the electric traction system as DC/AC inverter. In addition, a bidirectional-interleaved DC/DC converter with dual-loop controller is proposed for interfacing the ESI to a low-voltage battery pack in order to minimize the ripple of the battery current and to improve the efficiency of the DC system with lower inductor size. To validate the performance of the proposed configuration, the indirect field-oriented control (IFOC) based on particle swarm optimization (PSO) is proposed to optimize the efficiency of the AC drive system in PHEVs. The maximum efficiency of the motor is obtained by the evaluation of optimal rotor flux at any operating point, where the PSO is applied to evaluate the optimal flux. Moreover, an improved AC/DC controller based Proportional-Resonant Control (PRC) is proposed in order to reduce the THD of the input current in charger/V2G modes. The proposed configuration is analyzed and its performance is validated using simulated results obtained in MATLAB/ SIMULINK. Furthermore, it is experimentally validated with results obtained from the prototypes that have been developed and built in the laboratory based on TMS320F2808 DSP.

• 전력전자학회논문지
• /
• 제9권2호
• /
• pp.187-193
• /
• 2004

PDA, 스마트폰, USP 및 전기자동차와 같은 전기적 장치의 전력공급을 위하여 배터리가 직렬로 연결된 다중 셀을 만들어 일반적으로 사용한다. 이 경우 개별 셀 전압의 편차가 발생되면 배터리의 수명과 용량은 낮아지게 된다. 셀에서 전압의 안정화상태를 유지하기 위한 셀 전압을 안정화시키는 효율적인 방범은 없어서는 안 될 중요한 사항이다. 본 논문에서는 휴대형 가전기기에 적용하기 위해 마이크로컨트롤러를 사용한 다중 셀용 밸런싱 회로의 설계에 대하여 제안한다. 밸런싱 시스템은 충전되는 주기 동안 밸런싱 동작을 이행하며 마이크로컨트롤러로서 제어된다. 제안된 방법은 충전기와 레코드를 사용하여 실험을 통해 증명하였다. 실험결과에서 개별 배터리의 용량, 수령, 성능이 향상됨을 보여준다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.3-7
• /
• 2004

An electric power efficiency of electrodeless fluorescent lamp has big relativie property of gas in lamp, gas pressure, lamp formation, ingredients of magnetic substance and shape and action frequency etc. We used magnetic substance that open self-examination material of electrodeless fluorescent lamp antenna. Ferrite that is used in this experiment was Mn-Zn type. We have examined resistance kind, impedance, Q-factor's frequency characteristic by ferrite. Impedance, resistance and capacitance did not show difference in start frequency 2.65 [MHz] but there was difference quantity. We could know Q-factor's difference according to material, and Q-factor's is important part of antenna design.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 추계학술대회
• /
• pp.155-156
• /
• 2017

본 논문에서는 단일 셀과 배터리 팩의 전기적 특성 실험 기반 내부 파라미터를 추출하고 등가회로 모델에 적용하여 시뮬레이션 및 검증을 진행하였다. 본 논문에서는 임의로 선정한 단일 셀에 대한 파라미터를 추출하여 스크리닝이 이상적으로 되었다는 가정 하에 팩 단위로 확장한다. 단일 셀에서 확장된 파라미터와 배터리 팩 자체의 파라미터를 구하여 시뮬레이션 결과를 실제 전압과 비교하여 검증한다.

• 한국전기전자재료학회논문지
• /
• 제19권2호
• /
• pp.200-206
• /
• 2006

An electric power efficiency of electrodeless fluorescent lamp depens on a big relative property of gas, gas pressure, lamp formation, ingredients of magnetic substance and shape and action frequency etc. in lamp. We used magnetic substance that opens self-examination material of electrodeless fluorescent lamp antenna. We used Mn-Zn type as the Ferrite. We have examined resistance, impedance and Q-factor's frequency characteristic by ferrite. Coil turns were changed from 13 to 15 turns to recognize brightness change of lamp by winding number. Optical equipment (LS-100) was used to measure brightness. We could know Q-factor's difference according to material is important part of antenna design. When an electrodeless fluorescent lamp was made using T company's PE22, it showed the highest brightness. As number of winding is increased the brightness increased, and starting characteristic became good.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.607-610
• /
• 2004

An electric power efficiency of electrodeless fluorescent lamp has big relativie propertye of gas in lamp, gas pressure, lamp formation, ingredients of magnetic substance and shape and action frequency etc. We used magnetic substance that open self-examination material of electrodeless fluorescent lamp antenna. Ferrite that is used in this experiment was Mn-Zn type. Coill turn was changed from 13th to 13th turn to recognize brightness change of lamp by winding number. Optical equipment that used in an experiment was used to measure brightness (LS-100). When an electrodeless fluorescent ]amp was made using and T company's PE22, was it showed the highest brightness. As number of winding is increased the brightness increased, and starting characteristic became good.