• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.31-36
• /
• 2000

High temperature and pressure materials in power plant are degraded by creep damage, if they are exposed to constant loads for long times, which occurs in the load bearing structures of pressurized components operating at elevated temperatures. Many conventional measurement techniques such as replica method, electric resistance method, and hardness test method for measuring creep damage have been used. So far, the replica method is mainly used for the Inspection of High temperature and pressure components. This technique is, however, restricted to applications at the surface of the testpieces and cannot be used to material inside. In this paper, ultrasonic evaluation for the detection of creep damage in the form of cavaties on grain boundaries or integranular microcracks are carried out. And the absolute measuring method of quantitative ultrasonic velocity technique for Cr-Mo material degradation is analyzed. As a result of ultrasonic tests for crept specimens, we find that the sound velocity is decreased as the increase of creep life fraction$({\Phi}_c)$ and also, confirmed that hardness is decreased as the increase of creep life fraction$({\Phi}_c)$ but the coefficient of ultrasonic attenuation is increased as the increase of creep life fraction$({\Phi}_c)$. Finally based on the result in this paper, it can be recognized that the ultrasonic techniques using velocities and attenuation coefficient factor are very useful non-destructive methods to evaluate the degree of material degradation in fossile power plants.

• 해양환경안전학회지
• /
• 제21권6호
• /
• pp.770-777
• /
• 2015

본 논문에서는 전동기 구동장치를 선정하여 리액터 용량 및 종류, 부하의 크기에 따라 고조파 왜형률 변화추이를 검토하여 선박 및 해양플랜트에 적용 가능한 최적의 용량선정 근거를 마련하였다. AC라인 리액터와 DC링크 리액터는 가변주파수 구동장치 입력전류의 고조파를 크게 저감시키는 역할을 하며, 동일한 효과를 얻기 위한 DC링크 리액터의 인덕턴스가 AC라인 리액터 인덕턴스의 약 1.7배가 되어야 한다는 것을 시뮬레이션을 통하여 고찰하였다. 소프터웨어 PSIM을 활용하여 각 상황에 따른 전류 고조파 왜형률을 분석하였다.

• Architectural research
• /
• 제21권1호
• /
• pp.21-29
• /
• 2019

Recent years in Korea, some new developed buildings are only using electricity as power for heating, cooling, bathing and even cooking which means except electricity, there is no natural gas or other kinds of energy used in such kind of building. In vehicle industry area, scientists already invented electric vehicle as an environment friendly vehicle; after that, in architecture design and construction field, buildings only using electricity appeared; the curiosity of the environment impact of energy consumption by such kind of building lead me to do this research. In general, electricity is known as a clean energy resource reasoned by it is noncombustible energy resource; however, although there is no environmental pollution by using electricity, electricity generation procedure in power plant may cause huge amount of environment pollution; especially, electricity generation from combusting coal in power plant could emit enormous air pollutants to the air. In this research, the yearly amount of air pollution by energy using under traditional way in research target building that is using natural gas for heating, bathing and cooking and electricity for lighting, equipment and cooling is compared with yearly amount of air pollution by only using electricity as power in the building; result shows that building that only uses electricity emits much more air pollutants than uses electricity and natural gas together in the building. According to the amount of air pollutants comparison result between two different energy application types in the building, residential SOFC (Solid oxide fuel cell) is simulated to apply in this building for decreasing environment pollution of the building; furthermore, high load factor could lead high efficiency of SOFC, in the scenario of simulating applying SOFC in the building, SOFC is shared by two or three households in spring and autumn to increase efficiency of the SOFC. In sum, this research is trying to demonstrate electricity is a conditioned environment friendly energy resource; in the meanwhile, SOFC is simulated efficiently applying in the building only using electricity as power to decrease the large amount of air pollutants by energy using in the building. Energy consumption of the building is analyzed by calibrated commercial software Design Builder; the calibrated mathematical model of SOFC is referred from other researcher's study.

• 한국정보전자통신기술학회논문지
• /
• 제12권1호
• /
• pp.99-105
• /
• 2019

전기 자동차의 배터리 충전용 OBC는 주로 PFC회로와 절연형 DC-DC 컨버터 회로를 포함한 2단으로 구성된다. 일반적으로 PFC 회로로는 구조가 간단한 비절연형 부스트 컨버터가 사용되고, 절연형 DC-DC 컨버터로는 ZVS(Zero Voltage Switching)가 가능한 공진형 컨버터가 이용되고 있다. 전기자동차의 주행거리 증가에 따른 넓은 배터리 출력에 대응하기 위해서는 OBC의 넓은 출력범위가 필요하지만, 이러한 시스템 회로 구성에서는 ZVS를 위한 회로설계의 한계와 제어기 구성이 복잡해지기 때문에 배터리 충전에 요구되는 넓은 범위의 출력에 효과적으로 대응하기에는 어려움이 있다. 본 논문에서는 절연형 전류원 방식의 PFC 회로와 벅 DC-DC 컨버터로 구성된 OBC를 제안하였다. 제안된 OBC는 회로 및 제어기 구성이 용이하고, 넓은 출력범위에 대한 대응이 가능하다. 제안된 회로의 유효성을 검증하기 위해 3.3㎾급 시작품을 제작 하였으며, 동작결과 출력전압 150V~400V에서 동작안정성 및 정격 부하 조건에서 최대 효율 94.4%, 최대 역률 99.2%를 확인하였다.

• 한국전산구조공학회논문집
• /
• 제30권3호
• /
• pp.207-214
• /
• 2017

국내의 72.5kV 이상, 주파수 60Hz의 송배전설비인 옥내 및 옥외용 가스절연개폐장치(GIS)는 내진 안전성에 대해 국가에서 정한 한전표준규격(ES-6110-0002)을 만족해야 한다. 이 규격에서 명시되지 않은 사항은 IEC 62271-203, 62271-207 등의 관련 기기 규격에 준한다. 한전표준규격에서 기기는 정상사용상태와 특수사용상태에서 건전성이 유지되어야 한다. 안전성 판단을 위해 ASME BPVC SEC.VIII 내압용기 설계 기준에 의해 A6061-T6 재질의 GIS에 대한 정상사용상태 기준과 국내 한전표준규격과 국외 IEC 62271-207에 의한 특수사용상태 기준(지진)에 대한 총체적 응력상태를 판단하였다. 한전표준규격 기준(0.22g) 적용시, 최종응력이 알루미늄인 Part A는 78.2MPa, Part D2의 경우 102.3MPa로, ASME 허용응력 값 181.5MPa를 만족하고 있다. IEC 62271-207 High 0.5g의 경우에도 최종응력은 Part A는 90.5MPa, Part D2는 103.8MPa이다. 본 연구 결과, 72.5kV GIS는 한전표준규격의 구조안전성과 내진성능을 충분히 만족함을 보이고 있다. 내진해석으로 내진시험을 수행할 수 없는 대형 전력기기의 내진성능 실증에 활용될 수 있을 것으로 기대된다.

• 한국전기전자재료학회논문지
• /
• 제30권5호
• /
• pp.263-269
• /
• 2017

A piezoelectric cantilever energy harvester (PCEH) driven in longitudinal (3-3) vibration mode was fabricated, and its electrical properties were evaluated by varying the resistive load. A commercial PZT piezoelectric ceramic with a high piezoelectric charge constant ($d_{33}$) of 520 pC/N and the interdigitated (IDT) electrode pattern was used to fabricate the PCEH driven in longitudinal vibration. The IDT Ag electrode embedded piezoelectric laminates were co-fired at $850^{\circ}C$ for 2 h. The 3-3 mode PCEH was successfully fabricated by attaching the piezoelectric laminates to a SUS304 elastic substrate. The PCEH exhibited a high output power of 3.8 mW across the resistive load of $100k{\Omega}$ at 100 Hz and 1.5 G. This corresponds to a power density of $10.3mW/cm^3$ and a normalized global power factor of $4.56mW/g^2{\cdot}cm^3$. Given the other PCEH driven in transverse (3-1) vibration mode, the 3-3 mode PCEH could be better for vibration energy harvesting applications.

• 한국환경농학회지
• /
• 제26권1호
• /
• pp.1-6
• /
• 2007

본 연구에서는 바이오가스의 연소엔진을 이용한 에너지 전환시에 발생되는 $NO_x$와 CO의 배출특성을 분석하고 나아가 배출계수를 산정하고자 하였다. 바이오가스의 주성분인 메탄을 70%로 한 합성가스를 이용하여 실험한 결과 연소엔진의 표준상태에서 $NO_x$와 CO가 각각 4 ppm과 100 ppm의 배출농도를 나타내었고, 이는 1.29g/MMBtu와 30.86 g/MMBtu의 배출계수 값을 산정할 수 있었다. 바이오가스의 주성분인 메탄을 60%로 한 약간의 과잉공기의 상태에서는 $NO_x$와 CO가 각각 2 ppm과 200 ppm의 배출농도를 나타내었고, 이는 정격 조건에 비해 투입열량이 적어져 연소온도의 저하로 인하여 열적 반응에 의해 생성되는 $NO_x$는 줄고, CO는 증가함을 알 수 있었다. 미국 EPA의 배출계수를 비교하기 위하여 투입된 연료의 열량을 기준으로 비교해 볼 때 본 연구의 결과가 $NO_x$의 경우 근사한 값을 보여 주었고, 이는 국내 바이오 가스 연소시의 오염배출계수로 잘 적용 가능함을 보여 주었다. 본 연구에서 사용한 가스엔진이 오염배출 측면에서 대기 환경보전법상의 배출 허용기준 내에서 가동됨을 알 수 있었고, 가동조건에 따라 연소온도를 증가시킴으로서 CO의 발생을 저감시킬 수 있으리라 사료된다.

• 한국운동역학회지
• /
• 제21권3호
• /
• pp.369-382
• /
• 2011

The purpose of this study was to verify the validation of exercise effect with loading deviation during rowing exercise. We performed evaluation of based physical fitness and joint torque before the experiment for finding muscle unbalance. So we recruited twenty four subjects who have bigger muscle strength in more 20% than average one. Subjects divided two groups. One is dominant upper limbs(DU) and the other was dominant lower limbs(DL). Subjects performed rowing exercise using electric equipment (Robo.gym.Humonic.korea). Exercise is performed four sets a day including 25 times a set, and three days a week. Measurement consist of evaluation of based physical fitness and joint torque using biodex(biodex system3.USA). Evaluation of exercise effect performed each week in joint torque of shoulder, lumbar and knee joint and each month in based physical fitness. Also we adapted 30% of 1RM for muscular endurance and 70% of 1RM for muscle strength as exercise load. The results showed that the difference of maximal peak torque were getting increase significantly during exercise. Also difference of various factor in based physical fitness were getting increase significantly except flexibility and agility. This interpreted that rowing exercise with loading deviation types could provide muscle strength and muscular endurance exercise in same time. These results could be interpret to two ways. One is effect of improving physical fitness for rowing exercise and the other meaned validation of loading deviation in rowing exercise. Our study is going to verify the validation of loading deviation during rowing and we found out that loading deviation could provide muscle strength and muscular endurance exercise for improving muscle unbalance. Our study can be used development of exercise equipment and program for normal people with muscle unbalance. Also that provide effect of whole body exercise to anybody.