• 대한정형도수물리치료학회지
• /
• 제9권1호
• /
• pp.19-28
• /
• 2003

Objectives : This study was to investigate the relationship analysis in VDT(visual display terminal) of work hours. Methods : Questionnaires were completed by 41 women in VDT operations. The information was used to estimate multiple regression for the VDT of work hours related factors association. Results : The prevalence of the VDT of work hours was significantly higher in the shoulder which followed by the neck, the hand and fingers, the arms, the lowback, the back. The VDT of work hours decreased with aging. The VDT of work hours increased with work duration, single, lower among habitual exercise. The desk height, the seat pan height, the posture on the sitting, the elbow angle all did not meet the recommended criteria. Conclusions : Data from this study support a statistically significant association with satisfaction for occupation.

• 한국운동역학회지
• /
• 제16권4호
• /
• pp.61-71
• /
• 2006

The purpose of this study was to compare kinematic characteristics on the limbs at 3 different walking speed during the energy and the normal walking. Eight subjects performed energy walking and normal walking at the slow speed(65 beats/min), the normal speed(115beats/min), the fast speed(160 beats/min). The 3-d angle was calculated by vector projected with least squares solution with three-dimensional cinematography(Motion Analysis corporation). The range of motion was calculated on the trunk, shoulder, elbow, hip, knee joint. The results showed that stride length was no difference of the two walking pattern. The duration of support phase was also no difference of the two walking pattern. The range of motion of shoulder joint significantly increased in the sagittal and frontal planes, and the range of motion of elbow joint significantly increased as the energy walking. The range of motion of hip joint had no significant difference in the any planes in changing of walking speed. But the most remarkable difference of the two walking patterns revealed at the trunk. The range of flexion/extension angle had significant increasing $2.36^{\circ}$ at normal speed, and the range of the right/left flexion angle had significant increasing below $4^{\circ}$ at the 3 walking speed, and The range of rotation angle had significant increasing $7.35^{\circ}$, $9.22^{\circ}$, respectively at the normal and slow speed. But there was no significant difference of range of motion at the hip and knee joints between energy walking and normal walking.

• Clinics in Shoulder and Elbow
• /
• 제18권2호
• /
• pp.86-90
• /
• 2015

Background: Although there are several methods for evaluating bone quality, Hounsfield units (HU), a standardized computed tomography (CT) attenuation coefficient, provide a useful tool for estimating focal bone mineral density (BMD). The aim of this study is to investigate the HU for evaluating the degree of osteoporosis in greater tuberosity with regard to anchor positioning. Methods: Forty patients diagnosed as normal on shoulder CT were included and categorized according to age and gender. Axially sectioned CT images were processed to 3-dimensional models containing information about bone quality using Mimics (14.11 platform v14.1.1.1 Materialise). Three-dimensional anchors were simulated and positioned according to 6 regions of interest (ROI) in the greater tuberosity classified using Tingart's system. Mean HU of intra-anchor volumes in the 6 regions was measured. Results: A significant decrease in HU was observed with increasing age (p=0.0001) and menopause (p<0.001). A significant difference in HU was found between male and female groups with males showing the higher values (p=0.0001). HU of proximal areas of ROI was higher than those of distal areas (p<0.005). However, although mean HU of distal posterior ROI showed the lowest values, no statistically significant difference was found between anterior, middle, and posterior regions (p=0.087). Conclusions: Mean HU of ROIs provides a tool for preoperative assessment of focal BMD, which is a factor of suture anchor stability and can be used to aid decision-making regarding secure anchor positioning for rotator cuff repair. Our data support that the most secure point is the proximal regions of ROI.

• Clinics in Shoulder and Elbow
• /
• 제26권2호
• /
• pp.140-147
• /
• 2023

Background: The management of acromioclavicular (AC) joint dislocation remains controversial. Recently, anatomic coracoclavicular (CC) fixation with a double clavicular tunnel and three flip-buttons has shown promising results. This study aimed to evaluate functional and radiological outcomes in patients with high-grade AC joint dislocation treated with anatomic CC fixation using double clavicular tunnels and three flip-buttons. Methods: A retrospective, unicentric study was performed. The study included patients with high-grade AC joint dislocation who underwent surgery with anatomic CC fixation using double clavicular tunnels and three flip-buttons. Demographic data were obtained from medical records. A functional evaluation using subjective shoulder value (SSV), visual analog scale (VAS), and disabilities of the arm, shoulder, and hand (DASH) questionnaires was performed, and an evaluation of preoperative and postoperative comparative Zanca view images was performed. Factors associated with functional outcomes and radiological AC reduction were analyzed. Results: A total of 83 patients completed follow-up and were included in the analysis. The mean SSV, VAS, and DASH scores were 92.8, 0.8, and 6.4, respectively. Patients who had complications experienced significantly worse functional outcomes (DASH: P=0.037). Suboptimal final AC reduction was observed in nine patients (11.1%), and significantly more frequently in patients older than 40 years (P=0.031) and in surgeries performed more than 7 days after injury (P=0.034). There were two reoperations (2.4%). Conclusions: Anatomic CC fixation with a double clavicular tunnel and three flip-buttons leads to good functional outcomes, low complication rates, and high rates of optimal AC reduction.

• Clinics in Shoulder and Elbow
• /
• 제27권2호
• /
• pp.183-195
• /
• 2024

Background: Reverse total shoulder arthroplasty (rTSA) has gained popularity in recent years and is indicated for a wide variety of shoulder pathologies. However, use of rTSA in patients with "weight-bearing" shoulders that support wheelchair use or crutches has higher risk. The aim of this study was to assess the results of rTSA in such patients. Methods: Between 2005 and 2014, 24 patients (30 shoulders) with weight-bearing shoulders were treated with rTSA at our unit. Patients had cuff arthropathy (n=21), rheumatoid arthritis (n=3), osteoarthritis (n=1), acute fracture (n=3), or fracture sequela (n=2). Postoperatively, patients were advised not to push themselves up and out of their wheelchair for 6 weeks. This study was performed in 2016, and 21 patients (27 shoulders) were available for a mean follow-up of 5.6 years (range, 2-10 years). The mean age at surgery was 78 years (range, 54-90 years). Results: Constant-Murley score improved from 9.4 preoperatively to 59.8 at the final follow-up (P=0.001). Pain score improved from 2/15 to 13.8/15 (P=0.001). Patient satisfaction (Subjective Shoulder Value) improved from 0.6/10 to 8.7/10 (P=0.001). Significant improvement in mean range of motion from 46° to 130° of elevation, 14° to 35° of external rotation, and 29° to 78° internal rotation was recorded (P=0.001). Final mean Activities of Daily Living External and Internal Rotation was 32.4/36. Only three patients showed Sirveaux-Nerot grade-1 (10%) glenoid notching and three grade 2 (10%). Conclusions: rTSA can be used for treatment of patients with weight-bearing shoulders. Such patients reported pain free movement, resumed daily activities, and high satisfaction rates.

• 한국안전학회지
• /
• 제28권3호
• /
• pp.44-50
• /
• 2013

Process gas piping is one of the most basic components frequently used in the refinery and petrochemical plants. Many kinds of by-product gas have been used as fuel in the process plants. In some plants, natural gas is additionally introduced and mixed with the byproduct gas for upgrading the fuel. In this case, safety or design margin of the changed piping system of the plant should be re-evaluated based on a proper design code such as ASME or API codes since internal pressure, temperature and gas compositions are different from the original plant design conditions. In this study, series of piping stress analysis were conducted for a process piping used for transporting the mixed gas of the by-product gas and the natural gas from a mixing drum to a knock-out drum in a refinery plant. The analysed piping section had been actually installed in a domestic industry and needed safety audit since the design condition was changed. Pipe locations of the maximum system stress and displacement were determined, which can be candidate inspection and safety monitoring points during the upcoming operation period. For studying the effects of outside air temperature to safety the additional stress analysis were conducted for various temperatures in $0{\sim}30^{\circ}C$. Effects of the friction coefficient between the pipe and support were also investigated showing a proper choice if the friction coefficient is important. The maximum system stresses were occurred mainly at elbow, tee and support locations, which shows the thermal load contributes considerably to the system stress rather than the internal pressure or the gravity loads.

• Clinics in Shoulder and Elbow
• /
• 제15권1호
• /
• pp.32-36
• /
• 2012

목적: 쇄골 간부 불유합에서 개재 삼면피질 장골 이식술 및 금속판 고정술을 시행하고 그 방사선학적 및 임상적 결과를 알아보고자 하였다. 대상 및 방법: 2007년 9월부터 2011년 5월까지 쇄골 간부 불유합으로 개재 삼면피질 장골 이식술 및 금속판 고정술을 시행한 10예를 대상으로 하였으며, 평균 추시 기간은 30.7 (12~57)개월이었다. 불유합 부위의 경화된 골을 충분히 절제한 후 구조적 지지 및 쇄골 길이를 회복할 수 있도록 삼면피질 장골을 골 결손 부위에 개재한 후 금속판 고정술을 시행하였다. 술 후 방사선적 평가는 단순 방사선 사진을 이용하여 골 유합을 판단하였고, 임상적 평가는 UCLA, ASES, Quick DASH 평가 점수를 이용하였다. 결과: 전 예에서 골 유합을 얻을 수 있었으며, 평균 골 유합 기간은 18.4 (14~24)주였다. UCLA 점수는 술 전 평균 16.7점에서 최종 추시 시 평균 27.4점으로, ASES 점수는 술 전 평균 52.1점에서 최종 추시 시 평균 83.6점으로 호전되었다 (p<0.05). 최종 추시 시 Quick DASH 점수는 평균 40.5점이었다. 합병증으로 2예에서 견관절 강직이 있었으며, 그 중 1예는 술 후 11개월째 금속물 제거술과 함께 견관절 관절경 수술을 시행하였다. 그 외 고정물의 파손 및 감염 등의 합병증은 없었다. 결론: 쇄골 간부 불유합에서 개재 삼면피질 장골 이식술은 구조적 지지대 역할 뿐만 아니라 쇄골의 길이를 회복할 수 있는 좋은 술식으로 사료된다.

• 대한통합의학회지
• /
• 제6권4호
• /
• pp.39-45
• /
• 2018

Purpose : The purpose of this study is to investigate the effect of core motion pattern on abdominal muscle thickness on unstable support surface using sling suspension system and to provide an effective exercise program for therapeutic rehabilitation in clinical practice. Methods : In this study, we used the flank exercise using a sling. It was intended for 21 healthy men and 9 healthy women. Before and after the exercise of the subjects, abdominal muscles (EO, IO, TrA the thickness of the muscle) was determined using a diagnostic ultrasonic apparatus. The period of exercise was 3 times a week for 6 weeks. The exercise for each group started with 3 sets per week and 1 set per week was added. A description of the method and attitude of each exercise is as follows. First, the push-up flank 's exercise position is to put both feet on the sling and hold the floor with both hands. Second, the side flank's exercise postures take the side flanks, while the two legs hang on the sling and one arm supports the body with an articulated bend (about $90^{\circ}$). Third, the elbow flank's exercise position is to put the two legs on the sling, and take a flank posture with the arms bent and joint bending (about $90^{\circ}$). Results : There was a significant difference in the thickness of the muscle in the three flank movements after the exercise (p<.05). The most significant difference was in the change of the muscle thickness in the abdominal muscle, the outer muscle, and the stomach in the elbow flank exercise after exercise. There was a significant difference between the mean thickness of the abdominal muscles according to the flank type after exercise (p<.05). Conclusion : In flank exercise for core stabilization using sling, it is considered effective to strengthen the abdominal muscles by considering the support surface, difficulty level, change of movement pattern.

• 한국주거학회논문집
• /
• 제26권1호
• /
• pp.91-98
• /
• 2015

The purposes of this study are to analyze the problems of the elderly using kitchens by ergonomic work evaluation methods, and to make suggestions for planning and remodeling of the kitchens for the elderly. The work evaluation methods which used in this study were direct-observing methods, which contained the process of 2 or 3 times each visiting to four different houses where elderly people live. For direct-observing methods, analyzing with movement observations and observation methods with photos and videos were used. Characteristics of subject elderly people and problems of their kitchens were analyzed by static measurements, interviews, pictures, and videos. The data, which are recorded movements of the preparing meal of the elderly were analyzed by playing it back repeatedly. As results, physical characteristics of the elderly was the most important consideration; a participant with the arthritical knee was limping at the kitchen entrance due to the difference of the floor level, and a user with a bent back was working on the floor or place an elbow on the worktable to support her body. Those results made a conclusion about the common problems of the kitchens, and suggested the check list which has to be considered when designing the elderly using kitchen.

• 대한인간공학회지
• /
• 제23권4호
• /
• pp.45-56
• /
• 2004

The purpose of this study is to evaluate perceived discomfort of working postures in terms of upper body (back, shoulder, and elbow) flexions when an external load varies. Eighteen subjects participated in an experiment of appraising perceived discomfort of varying upper body postures with three levels of external loads given. The ANOVA results showed that the perceived discomfort of upper body postures was significantly affected by the external load. It was also apparent that the interactions between external load and upper body posture were significant (p< 0.001). The result implies that a new posture classification scheme for workload assessment methods may be in need to reflect such interactions between external load and upper body posture. In order to support the statement, a regression model of perceived discomfort of upper body postures obtained from the experiment was developed and compared to that of perceived discomfort of seven work-related postures found in automobile assembly operations. The correlation coefficient between predicted and actual values of perceived discomfort was about 0.96. It is expected that the result help to properly estimate the body stress resluting from worker's postures and external loads and can be used as a valuable design guideline on preventing work-related musculoskeletal diseases in industry.