• 제목/요약/키워드: Elasticity test

검색결과 606건 처리시간 0.028초

낙엽송 블록접착집성재의 접착 및 휨 강도 성능 (Bending and Bonding Strength Performances of Larix Block-glued Glulam)

  • 이인환;홍순일
    • Journal of the Korean Wood Science and Technology
    • /
    • 제44권3호
    • /
    • pp.315-322
    • /
    • 2016
  • 2개 이상의 보부재 집성재 요소들의 측면접착으로 제작된 "블록접착집성재"는 대단면 목조건축물의 건축부재로 활용 가능한 구조용재다. 블록접착집성재의 측면은 접착제의 종류와 도포량 및 압체압력을 각기 다른 조합으로 접착하여 박리시험과 전단블록시험으로 접착성능을 검토하였다. 실험결과 레조시놀접착제 $500g/m^2$을 도포하고 압체압력 1.5 MPa의 조건으로 제작된 블록접착집성재의 측면접착성능이 가장 양호하였다. 양호한 측면접착조건으로 제작된 블록접착집성재는 동일단면계수의 대조군 집성재와 휨 강도 성능을 비교 검토하였다. 블록접착집성재의 휨 탄성계수는 대조군 집성재와 유사하였으며, 파괴계수는 대조군집성재 보다 27% 향상되었다. 할렬은 대조군집성재 보다 블록접착집성재에서 다량 발생하였으며, 블록접착집성재의 측면접착층에서 계면파괴나 응집파괴는 관찰되지 않았다.

삼축압축시험에 의한 국내 모래의 변형-강도 특성 (A Characteristic of Deformation and Strength of Domestic Sands by Triaxial Compression Tests)

  • 박춘식;김종환;박철수
    • 대한토목학회논문집
    • /
    • 제34권2호
    • /
    • pp.515-527
    • /
    • 2014
  • 본 연구에서는 국내 모래의 공학적 특성을 파악하기 위하여 표준사, 욕지사, 낙동강사를 이용하여 구속압 조건, $K_0$ 조건, 과압밀 조건, 상대밀도 조건을 다르게하여 삼축압축시험을 실시하였다. 삼축압축시험 결과, 변형률 ${\epsilon}_1$에 따른 축차응력 $\acute{q}$의 변화는 구속압 ${\sigma}_3$와 상대밀도 $D_r$이 클수록 크게 변화하였으나, $K_0$ 조건과 과압밀 조건변화와 크게 상관이 없었다. 모래의 최대 내부마찰각(${\phi}_{max}$)은 구속압이 클수록 입자간의 접촉력이 크게 되어 작아지는 경향을 나타내었고, $K_0$ 조건과 과압밀 조건에 따라서는 거의 변화가 없는 것으로 나타났으며, 상대밀도에 따라서는 상대밀도가 감소함에 따라 내부마찰각도 작아지는 경향을 나타내었다. 체적변형률(${\epsilon}_u$)은 구속압이 클수록 입자의 파쇄성과 입자간의 재배열에 의해 체적 팽창이 작게 나타났으며, $K_0$ 조건과 과압밀 조건에서는 조건에 상관없이 거의 같은 거동을 보였고, 상대밀도에 따라서는 상대밀도가 커질수록 초기에는 압축되다가 축변형률(${\epsilon}_1$)이 증가할수록 팽창하는 경향이 뚜렷하게 나타났다. 변형률 변화에 따른 탄성계수 $E_{sec}$는 변형률이 커질수록 차츰 수렴하는 경향을 나타내었고, 축차응력($\acute{q}$)-변형률(${\epsilon}_1$) 관계에서 초기할선 탄성계수($E_{ini}$)>할선 탄성계수($E_{sec}$)>접선 탄성계수($E_{tan}$) 순으로 탄성계수의 크기가 산정되었으며, 구속압 및 상대밀도가 증가함에 따라 탄성계수가 증가하는 경향을 보였고, $K_0$ 및 과압밀에 따라서는 거의 비슷한 탄성계수를 나타내었다. 접선 탄성계수에 의한 정규화에 대해서는 다양한 증가비로 증가하는 경향을 보였다. 한계상태선의 기울기 M은 구속압이 증가함에 따라 감소하는 경향을 나타내었고, $K_0$ 및 구속압, 상대밀도에 따라서는 동일선상에 표현되며, 상대밀도가 증가할수록 한계상태선의 기울기 M도 증가하는 경향을 보였다.

Measurement of Mechanical and Physical Properties of Pepper for Particle Behavior Analysis

  • Nam, Ju-Seok;Byun, Jun-Hee;Kim, Tae-Hyeong;Kim, Myoung-Ho;Kim, Dae-Cheol
    • Journal of Biosystems Engineering
    • /
    • 제43권3호
    • /
    • pp.173-184
    • /
    • 2018
  • Purpose: This study was conducted to investigate the mechanical and physical properties of a Korean red pepper variety for particle behavior analysis. Methods: Poisson's ratio, modulus of elasticity, shear modulus, density, coefficient of restitution, and coefficient of friction were derived for "AR Legend," which is a domestic pepper variety. The modulus of elasticity and Poisson's ratio were measured through a compression test using a texture analyzer. The shear modulus was calculated from the modulus of elasticity and Poisson's ratio. The density was measured using a water pycnometer method. The coefficient of restitution was measured using a collision test, and the static and dynamic friction coefficients were measured using a inclined plane test. Each test was repeated 3-5 times except for density measurement, and the results were analyzed using mean values. Results: Poisson's ratios for the pepper fruit and pepper stem were 0.295 and 0.291, respectively. Elastic moduli of the pepper fruit and pepper stem were $1.152{\times}10^7Pa$ and $3.295{\times}10^7Pa$, respectively, and the shear moduli of the pepper fruit and pepper stem were $4.624{\times}10^6Pa$ and $1.276{\times}10^7Pa$, respectively. The density of the pepper fruit and the pepper stem were $601.8kg/m^3$ and $980.4kg/m^3$, respectively. The restitution coefficients between pepper fruits, pepper stems, a pepper fruit and a pepper stem, a pepper fruit and plastic, and a pepper stem and plastic were 0.383, 0.218, 0.277, 0.399, and 0.148, respectively. The coefficients of static friction between pepper fruits, pepper stems, a pepper fruit and a pepper stem, a pepper fruit and plastic, and a pepper stem and plastic were 0.455, 0.332, 0.306, 0.364, and 0.404, respectively. The coefficients of dynamic friction between a pepper fruit and plastic and a pepper stem and plastic were 0.043 and 0.034, respectively.

폐목재 칩을 활용한 목질계 보도포장재의 특성에 대한 기초연구 (Basic Study on the Characteristics of Wooden Sidewalk Pavement Material using Wood Waste Chip)

  • 최재진;송진우
    • 대한토목학회논문집
    • /
    • 제31권3D호
    • /
    • pp.413-420
    • /
    • 2011
  • 건설현장에서 나오는 폐목재 또는 활용가치가 낮은 벌목지에서 발생하는 나무뿌리와 가지 등의 임목폐기물을 분쇄한 목재 칩을 우레탄 수지로 결합시킨 보도용 포장재를 제안하기 위한 실험을 실시하였다. 시험체는 재료혼합비율로서 건설폐목재 칩 및 임목폐기물 칩에 대한 우레탄 수지의 질량비를 0.5, 0.75, 1.0의 3수준으로 정하고 재료 계량 후 믹서로 혼합, 성형한 다음 7일이 경과하였을 때 인장강도 시험, 골프공과 스틸볼을 이용한 탄력성 시험, 투수계수 측정 및 가연성 시험을 실시하였다. 실험결과 공기중 건조상태에서 시험체의 인장강도는 0.2~1.1MPa의 범위를 나타냈으며 재령 7일 이후의 강도 변화는 나타나지 않았다. 그러나 침수시켰을 때 강도가 저하되었으며 그 강도의 저하비율은 우레탄 수지의 사용량이 적을수록 크게 되므로 강우 등에 의한 수분 침투를 고려하여 폐목재 칩에 대한 수지의 질량비는 0.75 이상으로 하는 것이 바람직하다고 판단된다. 탄력성 시험결과로서 폐목재 칩과 우레탄 수지를 사용한 시험체의 GB계수와 SB계수는 20% 이하의 낮은 값으로 측정되어 보도용 포장재로서 우수한 특성을 나타냈다. 또한 투수계수는 모든 배합의 시험체에서 0.5mm/sec 이상으로, 투수성 포장재에 있어서 시공 후 요구되는 일반적인 투수계수의 기준값을 상회하였으며, 목질계 포장재의 가연성은 실용상 특별히 문제가 되지는 않을 것으로 판단되었다.

건조조건에 따른 오디분말을 첨가한 마들렌의 품질특성 (Quality Characteristics of Madeleine Added with Mulberry Powder According to Drying Conditions)

  • 이민애;박미란;변광인
    • 한국조리학회지
    • /
    • 제19권4호
    • /
    • pp.13-24
    • /
    • 2013
  • 본 연구는 냉동오디를 냉동건조와 열풍건조 방법으로 건조 후 분말화하여 마들렌에 첨가하여 제품의 품질 특성을 알아보고자 하였다. 냉동건조와 열풍건조로 냉동오디를 건조 후 분말화하여 각각의 시료의 일반성분과 이화학적 특성을 측정하여 비교 분석하였다. 마들렌은 제과기능사 실기시험에 출제되는 레시피를 토대로 각각의 시료를 밀가루 양에 대비하여 0%(control), 1%, 3%, 5%, 7%를 첨가하여 만들어 pH, 색도, 텍스쳐를 측정하고 관능검사를 통하여 소비자의 기호도를 파악하였다. 먼저 pH는 열풍건조오디분말 첨가군이 낮게 나타났으며, 색도에서 명도(L값)는 냉동건조오디분말과 열풍건조오디분말의 첨가율이 증가할수록 대조구와 비교해 감소하는 경향이 나타났다. 적색도(a값)는 열풍건조오디분말을 첨가했을 때가 냉동건조오디분말을 첨가했을 때보다 적색도가 증가하는 것으로 나타났다. 황색도(b값)는 오디분말의 첨가량이 증가할수록 감소하는 경향을 나타내었다. 냉동오디분말 첨가군은 경도(Hardness)와 탄력성(Elasticity)은 오디분말의 첨가량의 증가에 따라 유의적인 차이가 나타났다. 응집성(Cohesiveness)과 검성(Gumminess)은 첨가량이 증가함에 따라 감소하는 경향이 나타나고 있다. 열풍건조오디분말을 첨가한 마들렌의 경도(Hardness)는 오디분말 첨가량에 따라 유의적인 차이를 나타내었다. 탄력성(Elasticity)은 오디분말 첨가량에 따라 증가하며, 응집성(Cohesiveness)은 첨가량이 줄어들수록 감소하는 경향을 보였다. 검성(Gummines)은 첨가량이 증가할수록 증가하는 경향을 나타내었다. 관능검사의 기호도 결과는 냉동건조오디분말 5% 첨가군과 열풍건조오디분말 7% 첨가군의 기호도가 가장 높게 나타났다.

  • PDF

초유동 콘크리트의 재료특성에 관한 실험적 연구 (An Experimental Research on the Material Properties of Super Flowing Concrete)

  • 김진근;한상훈;박연동;노재호
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1995년도 가을 학술발표회 논문집
    • /
    • pp.56-62
    • /
    • 1995
  • In this study, the properties of super flowing cocrete containing gly ash were experimentally investigated and compared with those of ordinary concrete. Tests were carried out on five types of super flowing concrete mixes containing fly ash and three types of ordinary concrete mixes without fly ash. Flow test, O-funnel test, box test, Ltype thest and slump test were carried out to obtain the properties for the workability of fresh concrete. Compressime strength, splitting tensile strength, modulus of elasticity. creep and shrinkage test were also obtained as the mechanical properties of hardened concrete. In fresh concrete, it was found that super flowing concrete had excellent workability and flowability compared with ordinary concrete, and the volume ratio of coarse aggregate to concrete volume greatly influenced flowability. Super flowing concrete also had good mechanical properties at both early and late ages with compressive strengths reaching as high as 40 MPa at 28 days. The creep deformation of super flowing concrete investigated were relatively lower than that of ordinary concrete.

  • PDF

응력완화 검사(stress relaxation test)에 의한 도토리묵의 물리적 특성 (Rheological Properties of Acorn Flour Gels by Stress Relaxation Test)

  • 김영아;이혜수
    • 한국식품조리과학회지
    • /
    • 제1권1호
    • /
    • pp.53-56
    • /
    • 1985
  • 6%, 8%, 10%의 도토리묵에 데여 응력완화검사 (stress relaxation test)를 실시하여 전형적인 응력완화곡선 (stress relaxation curve)을 구하였다. 연속잔차법 (successive residual method)을 사용하여 완화곡선을 분석한 결과, 도토리묵은 spring 하나에 Maxwell 모형이 세개인 7-element, generalized Maxwell model 로 해석할 수 있었다. 또한 도토리묵가루의 농도가 커질수록 도토리묵의 평형탄성율(E$_{e}$) 과 탄성율( $E_1$, $E_2$, $E_3$)이 증가하였다.

  • PDF

강섬유보강콘크리트의 내화성에 관한일실험 (Fire Resistance Test of Steel Fiber Reinforced Concrete)

  • 윤재환
    • 한국화재소방학회논문지
    • /
    • 제1권1호
    • /
    • pp.19-26
    • /
    • 1987
  • In this study, fire resistance of steel fiber reinforced concrete was investigated Cylindrical and prismatic specimens made of Ordinary Portland Cement plain concrete and steel fiber reinforced concrete were exposed to heating in accordance with a standard time-temperature curve as specified in KS·F22 57, method of fire resistance test for structural parts of buildings, the period of heating was 1 hour and 2 hours. After the fire resistance test, mechanical properties of specimens such as compressive and bending strength, stress-strain curve, static and dynamic modulus of elasticity and bending toughness were investigated. Also the cracks and spallings of the specimens were observed. From the test results, it was confirmed that steel fiber reinforced concrete has a excellent fire resistance than plain concrete in the view of higher residual strength of concrete and smaller crackings because of steel fibers in concrete.

  • PDF

산업현장을 고려한 작업복 소재의 역학적 특성 연구 (The Mechanical Properties of Working Clothes Materials Considering Industrial Settings)

  • 배현숙
    • 한국염색가공학회지
    • /
    • 제25권2호
    • /
    • pp.140-151
    • /
    • 2013
  • In order to investigate the mechanical properties of working clothes materials considering industrial settings, the test weaving materials were compared with the existing materials depending on the season. The material design of the test fabrics were changed through fineness, composition, density of materials then subsequently treated with functional finish. As a result of evaluation of the forms according to KES-FB system, Koshi was deduced, and Numeri and Fukurami were increased. Thereby, the test weaving materials became flexible, surface became smoother, elasticity and volume characteristics indicated to have been improved. Consequently, the THV value of working clothes materials for test weaving was increased compared to existing materials which indicated improved result of the total hand value. Specially, the winter cloth material indicated improved drape characteristics and dimensional characteristics, showed improved liveliness as being compressed softly.

Effect of Fiber Hybridization on Durability Related Properties of Ultra-High Performance Concrete

  • Smarzewski, Piotr;Barnat-Hunek, Danuta
    • International Journal of Concrete Structures and Materials
    • /
    • 제11권2호
    • /
    • pp.315-325
    • /
    • 2017
  • The purpose of the paper is to determine the influence of two widely used steel fibers and polypropylene fibers on the sulphate crystallization resistance, freeze-thaw resistance and surface wettability of ultra-high performance concrete (UHPC). Tests were carried out on cubes and cylinders of plain UHPC and fiber reinforced UHPC with varying contents ranging from 0.25 to 1% steel fibers and/or polypropylene fibers. Extensive data from the salt resistance test, frost resistance test, dynamic modulus of elasticity test before and after freezing-thawing, as well as the contact angle test were recorded and analyzed. Fiber hybridization relatively increased the resistance to salt crystallization and freeze-thaw resistance of UHPC in comparison with a single type of fiber in UHPC at the same fiber volume fraction. The experimental results indicate that hybrid fibers can significantly improve the adhesion properties and reduce the wettability of the UHPC surface.