• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.1
• /
• pp.92-97
• /
• 2007

This study was carried out to minimize the lifting force and to design the slim sized frame of a height adjustment mechanism. This unit is designed for the display devices in order to enhance the ergonomics for effective height adjustment as well as to achieve much slimmer frame for the pedestal. A tolerance analysis of 6 sigma was applied to achieve smooth lift at design stage not to change the tolerance specification of gap several times in a roller type of lifting mechanism at mass production stage. The specification of minimum gap and the target of production yield ratio were agreed with a quality team before tooling. A DFSS simulation on drawings had been done with reasonable tolerance and achievable standard deviation(${\sigma}$) several times until the target specification of gap and yield ratio was met. Once tolerance and deviation(${\sigma}$) were fixed tooling start was done successfully. A CAE method was applied to achieve a slim design. Design parameters were frozen when those parameters matched the reference strength data of standard model. Through those tolerance analysis and CAE simulation the number of tool modification was reduced and production yield ratio was raised up without arguing quality specification at production stage in the end.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.4
• /
• pp.9-20
• /
• 1999

A higher order panel method based on B-spline representation for both the geometry and the velocity potential is developed for the solution of the flow around two-dimensional lifting bodies. The self-influence functions due to the normal dipole and the source are separated into the singular and nonsingular parts, and then the former is integrated analytically whereas the latter is integrated using Gaussian quadrature. A null pressure jump Kutta condition at the trailing edge is found to be effective in stabilizing the solution process and in predicting the correct solution. Numerical experiments indicate that the present method is robust and predicts the pressure distribution around lifting foils with much fewer panels than existing low order panel methods.

• Earthquakes and Structures
• /
• v.25 no.4
• /
• pp.269-282
• /
• 2023

This study investigates a rocking seismic isolation (RSI) system as a seismic protection measure against narrow-band ground-motions generated by earthquakes. Structures supported over RSIs are considered capable of reducing the lateral demands and damage of the main structural system through lifting and rocking. This lifting and rocking during earthquake activity is provided by free-standing columns. A single-degree-of-freedom (SDOF) system supported on a RSI system is subjected to narrow-band seismic motions and its response is compared to an analog system without RSI. The comparison is then extended to reinforced concrete linear frames with and without RSI; three-bay frames with 11 and 17 storeys are considered. It is found that the RSI systems significantly reduce acceleration and displacement demands in the main structural frames, more noticeably if the first structural mode dominates the response and for ratios of the predominant frequency of the ground motion to the predominant frequency of the main frame near one. It is also found that the RSI system is more effective in reducing lateral accelerations and displacements of the main structure when the aspect ratio, b/h, and size, R, of the free-standing columns decrease, although the rocking stability of the RSI system is also reduced.

• International journal of advanced smart convergence
• /
• v.12 no.4
• /
• pp.353-360
• /
• 2023

This paper explores notable shifts in the restaurant startup market following the lifting of social distancing measures. Key trends identified include an escalated interest in startups, a heightened focus on the quality and diversity of food, a relative decline in the importance of delivery services, and a growing interest in specific industry sectors. The study's data collection spanned three years, from April 2021 to May 2023, encompassing the period before and after social distancing. Data were sourced from a range of online platforms, including blogs, news sites, cafes, web documents, and intellectual forums, provided by Naver, Daum, and Google. From this collected data, the top 50 words were identified through a refinement process. The analysis was structured around the social distancing application period, comparing data from April 2021 to April 2022 with data from May 2022 to May 2023. These observed trend changes provide founders with valuable insights to seize new market opportunities and formulate effective startup strategies. In summary, We offer crucial insights for founders, enabling them to comprehend the evolving dynamics in food service startups and to adapt their strategies to the current market environment.

• Journal of Pharmacopuncture
• /
• v.7 no.2
• /
• pp.109-119
• /
• 2004

Objective : To broaden our understanding on occupational disease of market workers and to evaluate the effect of TKM treatment focusing on acupuncture and herb medicine and to promote base studies and clinical trials on occupational disease. Materials and Methods : Analysis was done on 33 Ga-Rak market workers' chart which had been selected through investigation of 1508 outpatient's chart of Kyung Won University Hospital from Jun. 1st, 2002 to May. 31th, 2003. Results : 1. Out of 33 patients, Men had more occupational diseases than women had and Most people were in their forties. 2. Major cause of the disease include repetitve bending, heavy weight lifting and overwork. 3. Past History of patients mostly include frequent lumbar sprain, periarthritis of shoulder, lumbar HNP 4. The patients with occupational disease were diagnosed as lumbar sprain, periarthritis of shoulder, lumbar HNP, degenerative spondylosis, spinal stenosis and their chief complaints were low back pain, omalgia, back pain with radicular pain. 5. The duration of treatment was mostly within a week. 6. Acupuncture, Bee Venom Acupuncture, moxibustion, Herb-medicine, extract, taping therapy, physical therapy were used as treatment methods. 7. Applied herb medicine were composed of 8 kinds of prescriptions and extract were made up of 6 prescriptions 8. Applied acupoints belonged mainly to 14 meridians 9. The treatment of herb medicine combined with acupuncture proved effective in treating the ocupational disease. Conclusion : The occupational disease of patients working in Ga-Rak market were closely related with overwork, especially with repetitive bending and heavy weight lifting and TKM treatment focusing on acupuncture combined with herb medicine was effective in treating occupational disease.

• Archives of Plastic Surgery
• /
• v.33 no.1
• /
• pp.75-79
• /
• 2006

The upper and lower lateral cartilages provide the key to the lower cartilaginous portion of the nose. Lifting the cartilages is essential procedure for correction of unilateral cleft lip nose deformity. After correction of cleft lip nose deformity, authors used acoustic rhinometry (AR) to compare the lower nasal cavity of cleft side with non-cleft side. AR is a well known new, non-invasive diagnostic technique in which nasal geometry is assessed by means of acoustic reflection. From June 1996 to January 2004, we performed acoustic rhinometric analysis after correction of unilateral cleft lip nose deformity. This study involved 40 children of age ranged from 3 months to 8 years. Subjects were divided into the group of incomplete unilateral cleft lip nose deformity(20 subjects), and the group of complete unilateral cleft lip nose deformity(20 subjects). Results show that lower nasal cavity volume between non-cleft side and cleft side has no difference, and better results were obtained when nasal molding prong was applied at cleft side nostril. The results between incomplete type and complete type have no significant difference. In conclusion, AR is an effective method to calibrate cross sectional area and nasal cavity volume of unilateral cleft lip nose deformity, and furthermore effective in comparing the volume of cleft side with non-cleft side after unilateral cleft lip nose deformity correction with lifting the lower lateral cartilages to the upper lateral cartilages.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.10a
• /
• pp.69-78
• /
• 1999

The stiffness of slab concrete section is not considered as effective in the existing method of construction for continued steel box girder bridge. Using lifting system and filled concrete, it is possible to make stiffness of slab concrete section effective and improve stiffness of negative moment section. It was proved that the stress of upper flange in positive moment is significantly lower than case of existing method through the stress comparison. This stress difference made possible to rearrange flange thickness and as the result of this rearrangement, the amount of steel and height of girder can be reduced up to 13.23% and 11.5%.

• Korean Journal of Occupational Health Nursing
• /
• v.9 no.1
• /
• pp.49-55
• /
• 2000

When standing, walking, or running for extended periods of time, fatigue occurs in the legs. Although there are many ways, to release tense or fatigued leg muscles, in the case that there is insufficient time to relax, an easy way to release leg fatigue is using an inclined step (about 3 minutes). This method was more effective than performing stretching exercises as studied. An experiment was conducted on a golf course in the Kangwon province in Korea. Subjects were chosen randomly and consisted of 5 females and 4 males golf caddies. Their main tasks consisted of pulling golf carts to the bottom of a hill for 8 to 10 hours and sometimes lifting and lowering golf clubs during the duration of one day. EMG was measured after work and after using the previously mentioned inclined Steps for the lower legs using ME3000P. This study investigated the types of inclined Steps which would be most effective and appropriate for golf caddies, whether sex difference had any influence existed between male and female workers. The results showed that a step with a $20^{\circ}$ angle was most effective for males and a step with a $25^{\circ}$ angle was most effective for females. Females showed faster recovery from fatigue than males. However, there were no statistical significance between males and females.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.6
• /
• pp.681-693
• /
• 2007

Construction techniques for continuous steel bridges were applied to steel-concrete double composite box girder bridges. Concrete depth and length at the bottom of the steel box in the negative moment region were determined by plastic moment region and negative moment region of the double composite section, respectively. Construction methods, such as crane lifting method, free cantilever method, and incremental launching method were used for the analysis of the construction stage. Two cases of the construction phase were considered and analyzed for the stress resultant of double composite girders. The behavior of the nose-deck elastic system was examined by three-dimensionless parameters, such as the nose length, the unit weight of the launching nose, and the flexural stiffness of the nose. The adoption of the launching nose has become an effective solution in the incremental launching of steel-concrete double composite box girder bridges.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.6
• /
• pp.43-49
• /
• 2018

In this paper, we propose a taping therapy as effective intervention for patients with the back pain. The purpose of this study is to investigate the effects of taping intervention on the VAS evaluated score and he muscular activation degree among 119 paramedics with musculoskeletal injury. In order to achieve the purpose of the study, data was collected from 15 paramediecs in the paramedics department of 3 fire stations under J city's fire defense headquarters. The following results can be obtained by measuring the subjective, the back muscle strength and the buckling-anteflexion before and after the taping for 15 119 paramedics. Through the verification experiment of taping effect to paramedics during the stretcher lifting in this study the VAS evaluated score for the backache are $1.67{\pm}0.62$ before and $0.80{\pm}0.68$ after the application of taping which show statistically significant decrease(p<0.05). In the experimentof joint operation range the measured buckling anteflexion length are $14.62cm{\pm}4.89$ before and $16.41cm{\pm}4.11cm$ after the application of taping which show statistically meaningful difference(p<0.05). In the comparison of muscle activity about paramedics erector spinae(ES) shows the meaningful decrease and external obliques(EO) displays the significant increase. Erector spinae(ES) and internal obliques(IO) show the increasing trend in the muscle activity although they are not significant. the muscle activity for the erector spinae is lowered so that the contribution to the force required for the extensor during the stretcher lifting is resultingly reduced to have the effects of enhancing the activity of abdominal muscles.