• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.4
• /
• pp.215-221
• /
• 2022

This study was carried out to investigate the growth characteristics, yield and chemical compositions of rye according to mixing ratio of chemical fertilize r(CF) and liquid swine manure (LSM) in paddy field cultivation. The experimental design was arranged in a randomized block design with three replications. The manure fertilizer ratio of five treatments were CF 100% + LSM 0% (C), CF 70% + LSM 30% (T1), CF 50% + LSM 50% (T2), CF 30% + LSM 70% (T3), and CF 0% + LSM 100% (T4) of rye. At this time, the application of liquid swine manure was based solely on nitrogen. Plant length did not show significant differences among treatments. Ear length, leaf length and leaf width were the longest in C, T3, and T2, respectively (p<0.05). The stem diameter showed in the order of T4 > T3 > T2 > T1 > C, which was thicker as the LSM application rate increased (p<0.05). Fresh, dry matter and total digestible nutrient (TDN) yield were the highest in T4 (p<0.05), whereas the lowest in C treatment. Crude protein, neutral detergent fiber (NDF), acid detergent fiber (ADF) and crude fiber content were did not show significant difference among treatments. However, compared to C, crude fat and crude ash were significantly higher in T2 and T3, respectively (p<0.05). Total mineral content decreased significantly as the LSM application rate increased (p<0.05). Total free sugar showed high in T3 and T4 with a high LSM ratio, but showed significantly lower in chemical fertilizer treatment (C) and low LSM treatment (T1) (p<0.05). The analysis of all the above results suggests that the application of LSM is very effective, considering the dry matter yield and the contents of free sugar. In addition, LSM may be possible to grow rye without chemical fertilizer.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5A
• /
• pp.407-415
• /
• 2010

In Korea, more than 90% of the total number of steel bridges built for 40~70 m span length is a steel box-girder bridge type. A steel box-girder bridge is suitable for long span or curved bridges with outstanding flexural and torsional rigidity as well as good constructability and safety. However, a steel box-girder bridge is uneconomical, requiring many secondary members and workmanship such as stiffeners and ribs requiring welding attachments to flanges or webs. Therefore, in US and Japan, a plate girder bridge, which is relatively cheap and easy to construct is generally used. One type of the plate girder bridge is the two- or three-main girder plate bridge, which is a composite plate girder bridge that minimizes the number of required main girders by increasing the distance between the adjacent girders. Also, for the simplification of girder section, the stiffener which requires attachment to the web is not required. The two-main steel girder plate bridge is a representative type of plate girder bridges, which is suitable for bridges with 10 m effective width and has been developed in the early 1960s in France. To ensure greater safety of two- or three-main girder plate bridges, a larger steel section is used in the bridge domestically than in Europe or Japan. Also, the total number of two- or three-main girder plate bridge constructed in Korea is significantly less than the steel box girder bridge due to a lack of designers' familiarity with more complex design detailing of the bridge compare to that of a steel box girder bridge design. In this study, a new construction method called Turn Over method is proposed to minimize the steel section size used in a two- or three-main girder plate bridge by applying prestressing force to the member using confining concrete section's weight to reduce construction cost. Also, a full scale 20 m Turn Over girder specimen and a Turn Over girder bridge specimen were tested to evaluate constructability and structural safety of the members constructed using Turn Over process.

• Journal of Bio-Environment Control
• /
• v.33 no.1
• /
• pp.12-21
• /
• 2024

The aim of this research was to investigate the effect of gibberellin on improving seedling growth characteristics and enhancing strawberry quality in cutting propagation. Cuttings of the cultivar 'Seolhyang' were treated with GA₃ for 30 and 60 minutes at concentrations of 50, 100, and 150 mg·L^-1, with distilled water used for dipping as the control. Evaluation of seedling growth showed a positive correlation between the duration of gibberellin dipping and growth characteristics such as leaf number and SPAD value. Plant height, petiole length, leaf length and width, and leaf area varied significantly based on the interaction between dipping time and concentration. Crown diameter exhibited differences depending on the dipping time, with cuttings producing superior seedlings having a diameter of 8.0 mm or more for all treatments except the 30-minute, 100 mg·L^-1 treatment. The T/R ratio was significantly lower in the 30-minute, 50 mg·L^-1 treatment, indicating the highest plant vigor. Quantum yield was lower at a concentration of 150 mg·L^-1, showing a decreasing trend with increasing gibberellin concentration. Nonphotochemical quenching was significantly smaller in the 30-minute, 150 mg·L^-1 treatment, indicating an effective reduction of stress in the cuttings. Antioxidant content was highest in the 30-minute, 50 mg·L^-1 treatment and the 60-minute, 150 mg·L^-1 treatment. Moreover, the results of post-transplanting growth assessment showed no negative effect of gibberellin on flowering induction. Therefore, it was confirmed that gibberellin treatment during the cutting propagation of 'Seolhyang' strawberries had a positive effect on the production of high-quality seedlings. Dipping the cuttings in 50 mg·L^-1 gibberellin for 30 minutes is considered to be the most suitable method for improving growth and quality compared to the control.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.3
• /
• pp.197-210
• /
• 2003

The non-float midwater pair trawl was effective in the mouth opening and control of the working depth in midwater and bottom. In contrast, we confirmed that it was difficult to keep the net at surface above 30 m of the depth by means of the full scale experiment in the field and the model test in the circulation water channel. To solve this problem, the kites were attached to the head rope of the non-float midwater pair trawl. In this study, four kinds of the model experiments were carried out with the purpose of applying the kite to the korean midwater pair trawl. The results obtained can be summarized as follows: 1. The working depth of the non-float midwater pair trawl with the kite was shallower than that of the proto type and non-float type. The working depth of the kite type was approximately 20m with 2 kites and about 5m with 4 kites under 4.0 knot. The working depth was almost constant but the depth of the head rope sank approximately 15m and 10m according to the increase in the front weight and the wing-end weight, respectively. The changing aspect of the working depth was constant, but the depth of the head rope sank approximately 22m according to the increase in the lower warp length (dL). 2. The hydrodynamic resistance of the kite type was almost increased in a linear form in accordance with the flow speed increase from 2.0 to 5.0 knot. The increasing grate of the hydrodynamic resistance tended to increase in accordance with the increase in flow speed. The hydrodynamic resistance of the kite type was larger approximately 5～10 ton larger than that of the non-float type and the proto type. The hydrodynamic resistance of the kite type increased approximately 3ton with the changing of the front weight from 1.40 to 3.50 ton and approximately 4 ton with the changing of the wing-end weight from 0 to 1.11 ton and approximately 5.5 ton with the changing lower warp length (dL) from 0 to 40 m, respectively. 3. The net height of the kite type was increased approximately 10 m with the change in the kite area from $2,270mm^2$ to 4,540 $\textrm{mm}^2$. The net height of the kite type was aproximately 50 m and 30 m larger than that of the proto type and the non-float type, respectively. The changed aspect of the net width was approximately 5m with the variation of the flow speed from 2.0 to 5.0 knot. 4. The filtering volume of the kite type was larger than that of the proto type and the non-float type by 28%, 34% at 2.0 knot of the flow speed and 42%, 41% at 3.0 knot, and 62%, 45% at 4.0 knot, and 74%, 54% at 5.0knot, respectively. The optimal towing speed was approximately 3.0 knot for the proto type and was over 4.0 knot for the non-float type, and the optimal towing speed reached 5.0 knot for the kite type. 5. The opening efficiency of the kite type was approximately 50% and 25% larger than that of the proto type and the non-float type, respectively.

• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.1
• /
• pp.61-71
• /
• 2015

Purpose : 3D Printers are used to create three-dimensional models based on blueprints. Based on this characteristic, it is feasible to develop a bolus that can minimize the air gap between skin and bolus in radiotherapy. This study aims to compare and analyze air gap and target dose at the branded 1 cm bolus with the developed customized bolus using 3D printers. Materials and Methods : RANDO phantom with a protruded tumor was used to procure images using CT simulator. CT DICOM file was transferred into the STL file, equivalent to 3D printers. Using this, customized bolus molding box (maintaining the 1 cm width) was created by processing 3D printers, and paraffin was melted to develop the customized bolus. The air gap of customized bolus and the branded 1 cm bolus was checked, and the differences in air gap was used to compare $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$ and $V_{95%}$ in treatment plan through Eclipse. Results : Customized bolus production period took about 3 days. The total volume of air gap was average $3.9cm^3$ at the customized bolus. And it was average $29.6cm^3$ at the branded 1 cm bolus. The customized bolus developed by the 3D printer was more useful in minimizing the air gap than the branded 1 cm bolus. In the 6 MV photon, at the customized bolus, $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of GTV were 102.8%, 88.1%, 99.1%, 95.0%, 94.4% and the $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of branded 1cm bolus were 101.4%, 92.0%, 98.2%, 95.2%, 95.7%, respectively. In the proton, at the customized bolus, $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of GTV were 104.1%, 84.0%, 101.2%, 95.1%, 99.8% and the $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of branded 1cm bolus were 104.8%, 87.9%, 101.5%, 94.9%, 99.9%, respectively. Thus, in treatment plan, there was no significant difference between the customized bolus and 1 cm bolus. However, the normal tissue nearby the GTV showed relatively lower radiation dose. Conclusion : The customized bolus developed by 3D printers was effective in minimizing the air gap, especially when it is used against the treatment area with irregular surface. However, the air gap between branded bolus and skin was not enough to cause a change in target dose. On the other hand, in the chest wall could confirm that dose decrease for small the air gap. Customized bolus production period took about 3 days and the development cost was quite expensive. Therefore, the commercialization of customized bolus developed by 3D printers requires low-cost 3D printer materials, adequate for the use of bolus.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.3
• /
• pp.265-275
• /
• 1985

Present studies were carried out to investigate the distribution and formation of organic tiers contained paddy soils in Honam area characteristics to give basic informations on the effective utilization, management and improvement of the soils. The results obtained were summarized as follows; 1. The extent of organic tiers contained paddy soils in Honam area were 6.538㏊ and the amount of peat deposits were presumed about 2.41 million M/T. 2. Out of the total extent of the organic tiers contained paddy soils, about 97.6% was distributed in Honam plains (water-sheds of Mangyeong-Dongjin river), while about 1.5% in the Naju plains (water-sheds of Yeongsan river), and 0.9% in the Wando and Yeocheon areas. 3. The period of peat formation was presumed to be about the early of Seung Moon period (B.C. 4,250), and the Gongdeog series and the Bongnam series were formed in the bog conditions close to the valley mouth of near rolling and hill with small steram channels, and the Gimje series was formed in the out-skirts plains of the Gongdeog and Bongnam soils. 4. In the casue of peat formation, it was presumed to be the Gimje series that accumulated the fibrous peat out of the autochthonous peat such as reeds and grasses etc, to be the Gongdeog and Bongnam series that accumulated the autochtonous peat and the xylem and fibrous peat out of first allochthonous peat. 5. In the Organic horizons of these soils, the range of muck and peat horizons were in 62-68cm and 68-137cm of soil profile in the Gongdeog series, 52-84cm and 84-113cm in the Bongnam series respectively, one of muck horizon was in 46-71cm in the Gimje series. 6. The marks of soil horizons of the soils were expressed that the lower soils than the horizon of muck and peat were formed Cg, Aag for the muck horizon, 0 for the peat horizon, 0 of peat horizon were distingushed with Oag and Oig according to Organic forms. 7. The depthe occurred the muck and peat horizons were positively correlated with the width of local in the Gongdeog series ($r=0.881^{**}$, $r=0.827^{**}$), but not in the Bongnam series and Gimje series.