• Spatial Information Research
• /
• v.11 no.1
• /
• pp.41-60
• /
• 2003

It is noted that the paper mapping system for University Building Facility has many limitations in terms of data maintenance, real-time GIS data acquisition, and economic efficiency. The aim of this research was to evaluate an operational potential of an on site real-time mobile GIS technique to resolve the problem faced in the university. The idea is based upon the recent trends in the field of 'Telecommunication and Information Technology' that uses a PDA (personal Digital Assistants), wireless network computing, mobile computing, etc. A real time mobile GIS approach has been adopted, in which a PDA is linked to a wireless internet and field workers record data on the computer at the site and analyse data on site. While there should be a considerable number and variety of factors associated with real-time mobile GIS quality, this research focuses on three criteria that are identified as fundamental to customer requirements; (1) data quarry (2) spatial analysis (3) real-time GIS database building. 'Art--empirical study for a case study facility has been conducted to confirm the validity for the system. The system has been checked experimentally, enabled the field users to quarry the data required simply and execute spatial analysis (buffer, overlay etc.,) accommodating versatile alternatives on the site. Detailed visual maps can be generated over large areas quickly and easily. The PDA interface, in particular, were ideally suited for field users to interactively displaying positional information with attribute data. This system has shown to be quite convenient to maintaining a highly reliable database since it could playa crucial role in documenting at real-time basis temporal and spatial changes occurred in the facilities. It is anticipated that this research output will greatly serve to introduce the reliable and cost-effective facility mapping system in the university by overcoming serious constraints suffered from the past non-real time mobile GIS approach.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.4
• /
• pp.138-150
• /
• 2012

The purpose of this study was to examine the regional disparity of ambulatory health care utilization considering spatio-temporal variation in South Korea during 1996-2008(precisely, in 1996, 1999, 2002, 2005, and 2008) using bayesian hierarchial spatio-temporal model. The spatial pattern uses an intrinsic gaussian conditional autoregressive (CAR) error component. Ornstein-Uhlenbeck method was applied to detect the temporal patterns. The results showed that substantial temporal-geographical variation depending on diseases exists in Korea. On the Contrary to the pattern of total outpatient utilizations, for example, the areas that chronic diseases distributed relatively high were most in rural where the proportion of elderly population was higher than in the urban. Chungcheongnam-do, Junlabuk-do, and Kyeongsangbuk-do had higher risks in hypertension, whereas arthritis was higher risk in the Kyeonggi-do, Chungcheongbuk-do, Junlanam-do, and Junlabuk-do. The results of this study suggested that the effective health intervention programmes needed to alleviate the regional variation of health care utilization. These outcomes also provided the foundation for further investigation of risk factors and interventions in these high-risk areas.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.1
• /
• pp.57-67
• /
• 2005

Fast scalar multiplication of points on elliptic curve is important for elliptic curve cryptography applications. In order to vary field sizes depending on security situations, the cryptography coprocessors should support variable length finite field arithmetic units. To determine the effective variable length finite field arithmetic architecture, two well-known curve scalar multiplication algorithms were implemented on FPGA. The affine coordinates algorithm must use a hardware division unit, but the projective coordinates algorithm only uses a fast multiplication unit. The former algorithm needs the division hardware. The latter only requires a multiplication hardware, but it need more space to store intermediate results. To make the division unit versatile, we need to add a feedback signal line at every bit position. We proposed a method to mitigate this problem. For multiplication in projective coordinates implementation, we use a widely used digit serial multiplication hardware, which is simpler to be made versatile. We experimented with our implemented ECC coprocessors using variable length finite field arithmetic unit which has the maximum field size 256. On the clock speed 40 MHz, the scalar multiplication time is 6.0 msec for affine implementation while it is 1.15 msec for projective implementation. As a result of the study, we found that the projective coordinates algorithm which does not use the division hardware was faster than the affine coordinate algorithm. In addition, the memory implementation effectiveness relative to logic implementation will have a large influence on the implementation space requirements of the two algorithms.

• The Journal of the Korea Contents Association
• /
• v.16 no.8
• /
• pp.419-426
• /
• 2016

The research is done to analyze the change of personal dosimeter according to the elapsed times(24 hours, 1 week, 2 weeks, 3 weeks, 4 weeks) and magnetic field and find out the effective exposure treatment for radiation workers. At first, research the heat treatment and radiation of grouped TLD and keep them in different environments-exposed separately to observe the consequences of glow curve and the level of radiation exposure. As a result, we could find that 24 hours passing TLD group showed the difference in glow curve and the level of radiation. This can be considered as the change caused by magnetic exposure. Also the average radiation exposure level of TLD group, unexposed to the magnetic field, was 15.41 mSv. And the average radiation exposure level of TLD group, exposed to the magnetic field, was 14.83 mSv which decreased the biggest amount(3.80%) among the other groups. If a radiation worker, who works in PET-MRI room, uses TLD as a personal dosimeter, the level of real radiation exposure caused by exposure to the magnetic field won't change significantly as recorded at a regular record cycle but with not regular record but interim record, the lower exposure dose will be appeared than the real level of radiation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.129-134
• /
• 2017

In the present society, our current technology associated with bakery industry has been improved as much as technical development can get abreast of the Western one where the bread has originated and has been awarded and ranked in the highest level of many bakery or pastry competitions. In these trends, many people are running for high value added business such as bakery industry and bakery $caf{\acute{e}}$, etc. with big interest. However, high labor cost of technician and difficulties in human resource management become obstruction factors in the growth of the bakery industries. Therefore, in this paper, the designed system for both dividing and rounding dough quickly and exactly at the same time was studied. The main function of this system is to divide the original dough into 3 tracks and then, to place 4 doughs in the inner track, 12 doughs in the mid track, 20 doughs in the outer track, totally 36 doughs in a routine. It takes much energy because 36 doughs can be completed in a routine. Therefore, this system uses hydraulic pressure and a 0.75Kw induction motor is used for dough rounding. This system can make primarily fermented dough into 36 divided doughs very quickly and exactly on a guide panel at the desired weight by dividing it within 1-9 seconds and by rounding each within 1-9 seconds. This system is very effective in bakery industry to minimize labor cost and it is expected to supply more hygienic products to the customers.

• Journal of the Society of Disaster Information
• /
• v.16 no.2
• /
• pp.392-401
• /
• 2020

Purpose: This study analyzes the operating characteristics of a lithium ion capacitor that can be used as a standby power supply in an emergency, and determines whether the standby power supply is abnormal even by measuring the voltage using a linear proportionality characteristic during charging and discharging. The aim is to provide an experimental basis that can be done. Method: As a method for this study, first, analyze the operation principle and characteristics of the existing backup power supply and lithium ion capacitor, and then measure the voltage of the lithium ion capacitor according to the configuration and system block diagram of the induction lamp used in the experiment. We proceed with the test of the measured value of discharge power for each voltage band to check the amount of power held by the battery and the operation test experiment using induction lamps. Results: Just by checking the charging voltage using the linear proportional characteristics of lithium ion capacitors, it provides a basis for accurately inferring the effective operating time of induction lamp lamps. Conclusion: In the event of a disaster, the lithium ion capacitor is used as a spare power supply for emergency induction lamps to prevent complete discharge of emergency induction lamps, to prevent the problem of performing normal operation of the standby power supply, and to use only a simple voltage measurement to reserve power. It was intended to suggest many uses for evacuation equipment application in the future by making it possible to check whether the device is abnormal.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.143-150
• /
• 2013

Solid-state disks (SSDs) have been widely used by high-performance personal computers or servers due to its good characteristics and performance. The NAND flash-based SSDs, which take large portion of the whole NAND flash market, are the major type of SSDs. They usually integrate a cache buffer which is built from DRAM and uses the write-back policy for better performance. Unfortunately, the policy makes existing scheduling methods less effective at the I/F level of SSDs Therefore, in this paper, we propose a scheduling method for the I/F with consideration of the cache buffer. The proposed method considers the hit/miss status of cache buffer and gives higher priority to the read requests. As a result, the requests whose data is hit on the cache buffer can be handled in advance and the read requests which have larger effects on the whole system performance than write requests experience shorter latency. The experimental results show that the proposed scheduling method improves read latency by 26%.

• International Journal of Costume and Fashion
• /
• v.13 no.1
• /
• pp.35-47
• /
• 2013

We know that humans are able to live comfortably when there is a balance between the living environment that surrounds us and us. Clothing, one of the necessities of life, serves a dual purpose of functioning as protection for the body as well as providing visual satisfaction, and so is the most effective bonding mechanism. A different type of comfort that has been provided through industrialization and advancements in technology has resulted in pollution problems in the environment, and it has reached a point of seriously thinking about its effects. The biggest problems in environmental pollution are air pollution and waste disposal, and something that cannot be ignored is that environmental hormones and harmful heavy metals have been discovered in the synthetic dyes used in the clothing product, and not only are they harmful to the body, but they also have adverse effects on skin allergies such as atopic dermatitis. Its effects on clothing, especially underwear and baby products, can become a serious issue. The use of natural vegetable dye can be considered the basis for the traditional Korean dyeing process, however not all natural dyeing process can be thought of as traditional Korean dyeing. This is because natural dyeing used to be the most common method of dyeing before synthetic dyes came along and became the dye of choice for most clothing. Natural dyes are beneficial to the body, and the nature colors, achieved from the natural materials, relieve eye strains as well as have a healing effect for people who are suffering from psychological instability such as stress. However, the use of mordant in order to increase the fastness and get better color effects can lead to even more damage to the environment, and it cannot be a dyeing method that is good for the body. Traditional natural dyeing is different from regular natural dyeing because it uses colors that the Korean people can identify with and applies specific methods in order to achieve those colors. Even though experimental study with dyestuff and practical use of the dyeing methods for traditional Korean dyeing has been started(Soh, H., 1983) and has been ongoing, it is still not easy for regular people to use the method on their own. At the present time, natural dye materials are getting made and sold more than ever, but there is a lot of confusion among consumers regarding the difference between traditional Korean dyeing and natural dyeing, as companies are using the two terms interchangeably to market their natural dye products. So getting a better understanding of the characteristics of traditional Korean dyeing and traditional colors should be considered first priority at this time. The purpose of this thesis is to study the traditional Korean view of color, which developed the culture of traditional dyeing in Korea, and the characteristics of traditional Korean dyeing, a method that pursued achieving Korea's color through natural dyeing.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.791-799
• /
• 2015

This study focuses on the algae growth restraining. Many researches on a critical damage from algae growth are published, but it is hard to find how th restrain. Abnormal algae increasing is a problem, because it makes red tides, biodeterioration, etc. Therefore this study aims to decrease the damage from algae growth. Some metal ions have been used microorganism killing materials from old times. Especially, Cu ions are highly effective. Based on these uses of the metal ions, a functional mortar which restrains algae growth is developed. The mortar contains soluble glass which dissolve in water. The soluble glass was made of Cu ions and phosphates. When the soluble glass is dissolved, Cu ions are soaked out stably from the soluble glass. Culture mediums which incubate algae were made to evaluate the developed mortar specimens. Culture mediums were filled with fresh water and sea water. Algae were incubated for fourteen days in culture mediums. The evaluating methods are measuring volume of the dissolved organic carbon and the chlorophyll. Using these two measurements, the mortar specimens are judged that can restrain algae or not. According to the result, the functional mortars of culture medium filled with fresh and sea water shows similar trend. The functional mortar for restraining algae growth performs that's role well.

• Analytical Science and Technology
• /
• v.24 no.6
• /
• pp.519-526
• /
• 2011

Chemometrics using near-infrared (NIR) and Raman spectroscopy have found significant uses in a variety quantitative and qualitative analyses of pharmaceutical products in complex matrixes. Most of the pharmaceutical can be measured directly with little or no sample preparation using these spectroscopic methods. During pharmaceutical manufacturing process, analytical techniques with no or less sample preparation are very critical to confirm the quality. This study showed NIR and Raman spectroscopy with principal component analysis (PCA) was very effective for the blending processing control. It is of utmost importance to evaluate critical parameters related to quality of products during pharmaceutical processing. The blending is confirmed by off-line determination of active pharmaceutical ingredient (API) by a conventional method such as high performance liquid chromatography (HPLC) and UV spectroscopy. These analytical methods are time-consuming and ineffective for real time control. This study showed the possibility for the determination of blend uniformity end-point of CR tablets with the use of both NIR and Raman spectroscopy. The samples were acquired from six positions during blending processing with U-type blender from 0 to 30 min. Using both collected NIR and Raman spectral data, principal component analysis (PCA) was used to follow the uniformity of blending and finally determine the end-point. The variation of homogeneity of six samples during blending was clearly found and blend uniformity end-point was successfully confirmed in the domains of principal component (PC) scores.