• Journal of Applied Reliability
• /
• v.18 no.3
• /
• pp.229-239
• /
• 2018

Purpose: There is a difficulty in Environmental Stress Screening (ESS) test design for weapon system's electrical/electronic components/products in small and medium-sized enterprises. To overcome this difficulty, I propose an easy ESS test design approach algorithm that is optimized with only one environment tolerance design information parameter (${\Delta}T$). Methods: To propose the mass production weapon system ESS test design for cost-effective optimization, I define an optimum cost-effective mathematical model ESS test algorithm model based on modified MIL-HDBK-344, MIL-HDBK-2164 and DTIC Technical Report 2477. Results: I clearly confirmed and obtained the quantitative data of ESS effectiveness and cost optimization along our ESS test design algorithm through the practical case. I will expect that proposed ESS test method is used for ESS process improvement activity and cost cutting of mass production weapon system manufacturing cost in small and medium-sized enterprises. Conclusion: In order to compare the effectiveness of the proposed algorithm, I compared the effectiveness of the existing ESS test and the proposed algorithm ESS test based on the existing weapon system circuit card assembly for signal processing. As a result of the comparison, it was confirmed that the test time was reduced from 573.0 minutes to 517.2minutes (9.74% less than existing test time).

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2002.05b
• /
• pp.190-191
• /
• 2002

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.3 no.1
• /
• pp.51-55
• /
• 2011

In this paper, it introduce how to operate the design 1 credit (one hour), containing in the experimental courses (2 credits and 3 hours) of "Basic Electronic Circuit Design and Experiment" and "Advanced Electronic Circuit Design and Experiment" in junior grade of Information & Control Engineering Advanced Course in Hankyong National University. The effective procedures, results, and improvements to operate the design 1 credit (one hour) in combination with the experimental one credit (2 hours), according to the engineering accreditation system, are introduced. To learn an effective design method, students have to learn completely the design courses according to a system diagram for completing design courses.

• International Journal of Advanced Culture Technology
• /
• v.8 no.2
• /
• pp.6-11
• /
• 2020

In today's world, the design industry is becoming more complex, with the development of networks such as the internet and revolutionary changes in information and telecommunications. As the demand for designers to cope with various situations occurring in these industrial sites or solve problems in practice promptly is required, a capstone design program was developed in collaboration with the industry. Capstone design classes have positive effects on creative problem solving ability, academic achievement and learning satisfaction by allowing students to think and experience the practical problems of the industrial field. It is also effective in improving communication, creative thinking and critical thinking. The purpose of this study is to search for talent training methods needed in the fashion industry and to develop effective programs through capstone design class studies conducted in the fourth grade of fashion design majors from 2017 to 2019 (6 semesters). Through these studies, the aim is to search for talent training methods needed in the fashion industry and to develop effective programs. If the capstone design learning method is used as a method of solving problems through close communication between the company and the educational field as an industry-academia cooperation system, it is expected to be positioned as a field-type human resource education method that is required in the industrial field.

• Korean Institute of Interior Design Journal
• /
• no.28
• /
• pp.265-265
• /
• 2001

The perceptual presentation of interior design is to represent an interior space planned by a designer as if people see it in reality. The perceptual presentation methods that have developed are perspectives, full-scale models, small-scale models, photography of models, video taping of models, computer images, computer animation, and virtual reality. The purpose of this study is to investigate limits of those perceptual presentation methods according to their characteristics. The methods have characteristics that are either static or dynamic and either monoscopic or stereoscopic. In terms of representing interior spaces and perceiving interior spaces, the dynamic characteristic is more helpful than the static characteristic because the dynamic characteristic provides consecutively changing views of interior spaces when people walk around within the spaces. The stereoscopic characteristic is more helpful than the monoscopic characteristic because the stereoscopic characteristic provides the binocular depth perception. Full-scale models, small-scale models, virtual reality that have dynamic and stereoscopic characteristics, are most effective. The next effective methods are video taping of models and computer animation that have dynamic and monoscopic characteristics. The last effective methods are perspectives and photography of models that have static and monoscopic characteristics. But the most effective methods can not be said that those are perfect because each of them still has limits. Designers have to consider the limits of each perceptual presentation method to find a way that shows their designs most effectively. To develop the perceptual presentation methods of interior design, researchers should focus on the helpful characteristics that are dynamic and stereoscopic.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.617-622
• /
• 2000

In this study, effective compressive strength and nodal zone of Strut-and-Tie Model are studied to propose a new design method for RC T-type pier coping for prevention of sudden brittle failure. The coping which transmits loads of bridge to pier should be properly designed to retain ductile behavior. In order to carry out this proper design using STM, tie must yield before concrete fails, and a stress at strut should not exceed a certain effective stress. Therefore, reasonable determination of the effective compressive strength of strut by considering stress states at the nodal zone exactly is very important. Since conventional STM is applied under assumption that all nodes are under hydrostatic stress state, actual non-hydrostatic stress state in nodal zone caused by geometrical characteristics, loading conditions, support conditions of structures can not be considered properly. In order to apply STM for design of RC T-type pier coping, the non-hydrostatic stress state of nodal zone is considered and effective compressive strength is proposed. Then, a new design method of RC T-type pier coping which applies the principle of superposition to obtain optimum ductile behavior is rationally designed.

• Korean Institute of Interior Design Journal
• /
• no.29
• /
• pp.265-272
• /
• 2001

The perceptual presentation of interior design is to represent an interior space planned by a designer as if people see it in reality. The perceptual presentation methods that have developed are perspectives, full-scathe models, small-scale models, photography of models, video taping of models, computer images, computer animation, and virtual reality. The purpose of this study is to investigate limits of those perceptual presentation methods according to their characteristics. The methods have characteristics that are either static or dynamic and either monoscopic or stereoscopic. In terms of representing interior spaces and perceiving interior spaces, the dynamic characteristic is more helpful than the static characteristic because the dynamic characteristic provides consecutively changing views of interior spaces when people walk around within the spaces. The stereoscopic characteristic is more helpful than the monoscopic characteristic because the stereoscopic characteristic provides the binocular depth perception. Full-scale models, small-scale models, virtual reality that have dynamic and stereoscopic characteristics, are most effective. The next effective methods are video taping of models and computer animation that have dynamic and monoscopic characteristics. The last effective methods are perspectives and photography each of models that haute static and monoscopic characteristics. But the most effective methods can nut be said that those are perfect because each of them still has limits. Designers have to consider the limits of each perceptual presentation method to find a way that shows their designs most effectively. To develop the perceptual presentation methods of interior design, researchers should focus on the helpful characteristics that are dynamic and stereoscopic.

• International Journal of Contents
• /
• v.6 no.3
• /
• pp.65-70
• /
• 2010

This paper addresses the importance of knowledge management (KM) and the relationship of that theory when applied to improving interior design organizational performance in four areas: people, processes, design products, and organizational performance. Included is the way knowledge theory manifests in three different professional settings: coaching and training, designing, and service settings. Knowledge management, although well established in interior design services, requires effort in coaching and training as motivation is a critical variable. Whereas, strategies for knowledge management vary from industry to industry given diversity in situational variables, knowledge in each professional setting can be significantly aided by capturing and storing empirical, tacit, and explicit information, providing real-time electronic storage and retrieval of information [5] and consistent with transformational theory, through opening communication channels across the full range of the organization, inspiring and motivating individuals, and aligning all members of the organization toward a common vision [8]. Professional settings discussed in this paper are:(a)an learning organization enumerated in KM; (b)designing factors for managing knowledge theory themes; and (c)service, effective, efficient, and innovative KM application that is relevant to the process of developing effective KM for interior design service organizations. Folded within each will be a discussion on KM's impacts on visions, strategies, costs, and organizational performance. It has reiterated the impact of KM on one level might lead to synergistic impacts on another. Thus, KM has the potential to produce several interconnected impacts on people, design products, processes, and organizations.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.6
• /
• pp.77-87
• /
• 2013

A present LSD (limited state design) code for temperature load in the domestic bridge design has applied a uniform standard for various bridge types. In this study, in order to calculate the effective temperature, a specimen of steel box girder bridge section with real size dimension was manufactured. For a year, the temperature data were measured at the 18 point in steel deck of steel box girder bridges specimen. Effective temperature within the cross section according to atmospheric temperature was calculated by this experiment data. The analyzed results were very similar correlation when compared with the effective temperature of the Euro Code. Therefore, the effective temperature which calculated based on the present data could be used as the basic data in order to present to the appropriate design criteria for the thermal loads on the domestic bridge design.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2616-2628
• /
• 2021

The results of effective irradiation swelling in a wide range of burnup levels are numerically obtained for an inert matrix fuel, which are verified with DART model. The fission gas swelling of fuel particles is calculated with a mechanistic model, which depends on the external hydrostatic pressure. Additionally, irradiation and thermal creep effects are included in the inert matrix. The effects of matrix creep strains, external hydrostatic pressure and temperature on the effective irradiation swelling are investigated. The research results indicate that (1) the above effects are coupled with each other; (2) the matrix creep effects at high temperatures should be involved; and (3) ranged from 0 to 300 MPa, a remarkable dependence of external hydrostatic pressure can be found. Furthermore, an explicit multi-variable mathematic model is established for the effective irradiation swelling, as a function of particle volume fraction, temperature, external hydrostatic pressure and fuel particle fission density, which can well reproduce the finite element results. The mathematic model for the current volume fraction of fuel particles can help establish other effective performance models.