• Journal of Navigation and Port Research
• /
• v.37 no.6
• /
• pp.637-645
• /
• 2013

Masan bay with a semi-enclosed waters has serious water quality problems due to the low flow and river pollution load from land, and shows the vulnerable locational characteristics to storm surge. We are seeking the way of both operating disaster prevention facilities and water quality improvement measures in the bay. That is, the water was exchanged using the head difference occurred by operating disaster prevention facilities. The location of disaster prevention facilities was assumed to be in the inlet of the bay, in the vicinity of Machang bridge, and in the vicinity of Dot island and the operation time was assumed to be early morning hours(01~05) considering the number of shipping passage and annual tide, and spring tide of the largest head difference. In addition, the experiment case of water exchange including the in-outflow feeder pipe was tested. According to the simulation results, water exchange rate in all experiments has shown a steady increase. Water exchange rate of the whole of Masan bay in the case of present is 38.62%. The water exchange rate of the inside of Masan bay compared with the inlet of bay, appeared to be very low. Thus, we judged that the characteristics of semi-enclosed waters were well reproduced. On the results of the experiment of disaster prevention facilities and in-outflow feeder pipe, the case of the operation of disaster prevention facilities, water exchage rate is high compared with the case of present. And, the higer the operating frequency, the more water exchange is appeared. The cases of water exchange prevention facilities through the in-outflow feeder pipe caused by the head difference, also showed the higest improvement of the water quality. Compared with the south of Machang bridge, the effect of water exchange was better in the inlet of Masan bay and Dot island. On the other hand, the inlet of Masan bay is higer than Dot island as for water exchange of the whole of Masan bay, but opposite, water change rate including Masan inside was higher in the case of Dot island.

• Restorative Dentistry and Endodontics
• /
• v.29 no.2
• /
• pp.170-176
• /
• 2004

Objectives : In the unique metal iris method. the developing interfacial gap at the cavity floor resulting from the cavity wall property during polymerizing composite resin might affect the nominal shear bond strength values. The aim of this study is to evaluate that the iris method reduces the cohesive failure in the substrates and the cavity wall property effects on the shear bond strength tests using iris method. Materials and Methods : The occlusal dentin of 64 extracted human molars were randomly divided into 4 groups to simulate two different levels of cavity wall property (metal and dentin iris) and two different materials ($ONE-STEP^{\circledR}$ and $ALL-BOND^{\circledR}$ 2) for each wall property. After positioning the iris on the dentin surface. composite resin was packed and light-cured. After 24 hours the shear bond strength was measured at a crosshead speed of 0.5 mm/min. Fracture analysis was performed using a microscope and SEM. The data was analyzed statistically by a two-way ANOV A and t-test. Results : The shear bond strength with metal iris was significant higher than those with dentin iris (p＝0.034). Using $ONE-STEP^{\circledR}$, the shear bond strength with metal iris was significant higher than those with dentin iris (p＝0.005), but not in $ALL-BOND^{\circledR}$ 2 (p＝0.774). The incidence of cohesive failure was very lower than other shear bond strength tests that did not use iris method. Conclusions：The iris method may significantly reduce the cohesive failures in the substrates. According to the bonding agent systems. the shear bond strength was affected by the cavity wall property.

• Restorative Dentistry and Endodontics
• /
• v.34 no.5
• /
• pp.424-429
• /
• 2009

This study aimed to assess the influence of different cross-sectional area on the cyclic fatigue fracture of Ni-Ti rotary files using a fatigue tester incorporating cyclical axial movement. Six brands of Ni-Ti rotary files (ISO 30 size with. 04 taper) of 10 each were tested: Alpha system (KOMET), HeroShaper (MicroMega), K3 (SybronEndo), Mtwo (VDW), NRT (Mani), and ProFile (Dentsply). A fatigue-tester (Denbotix) was designed to allow cyclic tension and compressive stress on the tip of the instrument. Each file was mounted on a torque controlled motor (Aseptico) using a 1:20 reduction contra-angle and was rotated at 300 rpm with a continuous, 6 mm axial oscillating motion inside an artificial steel canal. The canal had a $60^{\circ}$ angle and a 5 mm radius of curvature. Instrument fracture was visually detected and the time until fracture was recorded by a digital stop watch. The data were analyzed statistically. Fractographic analysis of all fractured surfaces was performed to determine the fracture modes using a scanning electron microscope. Cross-sectional area at 3 mm from the tip of 3 unused Ni-Ti instruments for each group was calculated using Image-Pro Plus (Imagej 1.34n, NIH). Results showed that NRT and ProFile had significantly longer time to fracture compared to the other groups (p < .05). The cross-sectional area was not significantly associated with fatigue resistance. Fractographycally, all fractured surfaces demonstrated a combination of ductile and brittle fracture. In conclusion, there was no significant relationship between fatigue resistance and the cross-sectional area of Ni-Ti instruments under experimental conditions.

• Resources Recycling
• /
• v.9 no.4
• /
• pp.16-27
• /
• 2000

In order to produce raw material powder of advanced magnetic material by spray roasting process, newly modified spray roasting system was developed in this work. In this spray roasting system, raw material solution was effectively atomized and sprayed into the reaction furnace. Also, uniform temperature distribution inside reaction furnace made thermal decomposition process fully completed, and produced powder was effectively collected in cyclone and bag filter. This system equipped with apparatus which can purify hazard produced gas. In this study complex acid solution was prepared by dissolution of mill scale and ferro-Mn into the acid solution, and the pH of this complex acid solution was controlled about to 4. It was conformed that mill scale and ferro-Mn containing a lot of impurities such as $SiO_2$, P and Al could be used as raw material by reducing the impurities content of complex acid solution below 20 ppm. Complex oxide powder of Fe-Mn system was produced by spraying purified complex acid solution into the spray roaster through nozzle, and the variations of produced powder characters were studied by changing he reaction conditions such as reaction temperature, the injection velocity of solution and air, nozzle tip size and concentration of solution. The morphology of produced powder had spherical shape under the most experimental conditions, and concentration of solution. The morphology of produced powder has spherical shape under the most experimental conditions, and the composition and the particle size distribution were almost uniform, which tells the excellence of this spray roasting system. The grain size of most produced powder was below 100 nm. From the above results, it will be possible to produce ultra fine oxide powder from the chloride of Fe, Mn, Ni, Cu and rare earth by using this spray roasting system, and also to produce ultra fine pure metal powder by changing reaction atmosphere.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.4
• /
• pp.459-464
• /
• 2008

This study was performed to investigate the effect of calcium-rich large anchovy on calcium metabolism in rats for 5 weeks. Experimental animals were randomly assigned to 5 treatments with 14 heads of Spraque Dawley male rats in each group. The experimental diets were as follows; market milk group (M) as control, market milk+calcium-rich large anchovy group (MA), market milk＋calcium carbonate group (MC), market milk+calcium lactate group (ML), and enriched-calcium market milk group (M2), which were formulated with commercially semi-purified rat chow (AIN-diet) to maintain the same level of calcium (1%) in all groups. Femur lengths of M and M2 groups were significantly higher than other groups. Bone mineral density (BMD) and bone mineral content (BMC) and calcium content of femur were the highest in MA group than other groups. In vitro and in vivo calcium absorption rates were high in MA group (7.30% vs 27.50%) compared with those of the other groups. Serum total-cholesterol and HDL-cholesterol levels were significantly different between M group and MA group (p<0.05). Creatinine levels were significantly higher in M, MA and MC groups than in M2 group (p<0.05). Serum calcium, osteocalcin and ALPase activities were higher in calcium-rich large anchovy (MA) group among the treatments, but there was no significant difference. SGOT activity was significantly lower in M2 group than those of M, MA and MC groups (p<0.05). These results may indicate that the calcium-rich large anchovy has enforced the BMD, BMC and calcium absorption rates of in vitro and in vivo compared with the other groups and might be a calcium-enriched food with large anchovy.

• Journal of radiological science and technology
• /
• v.27 no.2
• /
• pp.29-33
• /
• 2004

Until early 1980s we have lived without thinking that radon ruins our health. But, scientists knew truth that radon radioactive danger is bedeviling on indoor that we live for a long time. Specially, interest about effect that get in danger and injury for Radon and human body is inactive in our country. Recently, with awareness for Radon contamination, We inform about importance and danger of Radon in some station of the Seoul subway, indoor air of school facilities and We had interest with measure and manages. Usually, Radon gas emitted in base of building enters into indoor through building floor split windage back among radon or indoor air of radon daughter nucleus contamination is increased. Therefore, indoor radon concentration rises as there are a lot of windages between number pipe of top and bottom and base that enter crack from estrangement of the done building floor, underground to indoor. Thus, Radon enters into indoor through architecture resources water as well as, kitchen natural gas for choice etc., but more than about 85% from earth's crust emit. Danger and injury of health by Radon and Radon daughter nucleus that is indicated for cause of lung cancer incerases content of uranium of soil rises specially from inside pit of High area and a mine, cave, hermetical space with house. Safe sub-officer of radon concentration can not know and danger always exists large or small during. So, Important thing reduces danger of lung cancer by lowering concentration of Radon within house and building. Therefore, is thought that need general house Radon concentration measurement, measured Radon concentration monthly using Sintillator radon monitor. Study finding appeared high all underground market 1 year than the ground, and the winter appeared high than the summer. Specially, month that pass over 4pCi in house that United States Environmental Protection Agency advises appeared in underground, and appeared and know Radon exposure gravity by 4 months during 12 months. Therefore, Thinking that establishment and regulation of norm and preparation of reduction countermeasure about Radon are pressing feels, and inform result that measure Radon concentration.

• Journal of radiological science and technology
• /
• v.36 no.1
• /
• pp.39-47
• /
• 2013

For radiotherapy in rectal cancer patients treated with small bowel displacement device (SBDD) and belly board, We will suggest new indication of using SBDD depending on obesity index by analyzing correlation between obesity and irradiated small bowel volume. In this study, We reviewed 29 rectal cancer patients who received pelvic radiation therapy with belly board and SBDD from January to April in 2012. We only analyzed those patients treated with three-field technique (PA and both LAT) on 45 Gy (1.8 Gy/fx). We measured patients' height, weight, body mass index (BMI), waist-hip ratio (WHR) and divided BMI into two groups.(${\geq}23$:BMI=group1, <23:BMI=group2) We performed a statistical analysis to evaluate correlation between total volume of bladder($TV_{bladder}$), obesity index and high dose volume of small bowel (small bowel volume irradiated at 90% of prescribed dose, $HDV_{sb}$), low dose volume of small bowel (small bowel volume irradiated at 33% of prescribed dose, $LDV_{sb}$). The result shows, gender, WHR and status of pre operative or post operative do not greatly affect $HDV_{sb}$ and $LDV_{sb}$. Statistical result shows, there are significant correlation between $HDV_{sb}$ and BMI (p<0.04), $HDV_{sb}$ and $TV_{bladder}$ (p<0.01), $LDV_{sb}$ and $TV_{bladder}$ (p<0.01). BMI seems to correlate with $HDV_{sb}$ but does not with $LDV_{sb}$ (p>0.05). There are negative correlation between $HDV_{sb}$ and BMI, $TV_{bladder}$ and $HDV_{sb}$, $TV_{bladder}$ and $LDV_{sb}$. Especially, BMI group1 has more effective and negative correlation with $HDV_{sb}$ (p=0.027) than in BMI group2. In the case of BMI group 1, $TV_{bladder}$ has significant negative correlation with $HDV_{sb}$ and $LDV_{sb}$ (p<0.04). In conclusions, we confirmed that Using SBDD with belly board in BMI group1 could more effectively reduce irradiated small bowel volume in radiation therapy for rectal cancer. Therefore, We suggest using belly board with SBDD in order to reduce the small bowel toxicity in rectal radiotherapy, if patients' BMI is above 23.

• Korean Security Journal
• /
• no.61
• /
• pp.255-283
• /
• 2019

This study conducted a survey of 315 facility security workers in Daejeon, South Chungcheong Province and Gyeonggi Province for about a week from August 7 to August 13, 2019 to identify the impact of work environment and job stress on job satisfaction, and finally collected 293 of the total 315 parts of the data, excluding non-response and inappropriate responses. The STATA 14.2 Statistical Package Program was used for analysis of the collected data, frequency analysis was performed to determine the distribution ratio of the subjects, and reliability analysis and correlation analysis were performed with respect to the established key variables. Next, t-test and one-way ANOVA were conducted to verify differences in work environment, task stress and task satisfaction factors according to demographic characteristics, and the results were as follows: There were differences in work environment, job stress and job satisfaction recognition depending on demographic characteristics. In detail, the factors for the work environment indicated significant differences in age, academic background, number of years of service, wages and types of service in the recognition of the work environment. Job stress factors indicated significant differences in age, education, wages and types of service in job stress recognition. In job satisfaction factors, age, academic background, number of years of service and wages (monthly benefits) showed significant differences in job satisfaction recognition. In addition, the results of multiple regression analyses to identify the working environment, job stress, and job satisfaction are as follows. The working environment has had a positive impact on job satisfaction, and the better the job environment, promotion and organizational characteristics, the higher the job satisfaction. It has been shown that job stress has had a negative impact on job satisfaction, conflict of relationship (promoting colleagues). job autonomy increases job satisfaction, and job satisfaction decreases when job requirements and job insecurity increase. In terms of the impact of work environment on job satisfaction, the higher the work promotion, job environment and organizational characteristics, the higher the job satisfaction level, the report showed. According to these studies, the better the working environment, the lower the job stress, and the lower the job stress, the higher the job satisfaction. In addition, the better the working environment, the more satisfied the job was found to be, and the empirical research result was verified that improvement of the working environment of security workers can reduce job stress and improve job satisfaction through improvement of the working environment.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.2
• /
• pp.156-179
• /
• 2020

The Preservation Decree (1933) is the basic law relevant to the conservation of cultural property of colonial Chosun, and invoked clauses from the Old History Preservation Act (1897), the Historic Scenic Sites Natural Monument Preservation Act (1919), and the National Treasure Preservation Act (1929), which were all forms of Japanese Modern Cultural Heritage Law, and actually used the corresponding legal text of those laws. Thus, the fact that the Preservation Decree transplanted or imitated the Japanese Modern Cultural Heritage Law in the composition of the constitution can be proved to some extent. The main features and characteristics of the Preservation Decree are summarized below. First, in terms of preservation of cultural property, the Preservation Decree strengthened and expanded preservation beyond the existing conservation rules. In the conservation rules, the categories of cultural properties were limited to historic sites and relics, while the Preservation Decree classifies cultural properties into four categories: treasures, historic sites, scenic spots, and natural monuments. In addition, the Preservation Decree is considered to have advanced cultural property preservation law by establishing the standard for conserving cultural property, expanding the scope of cultural property, introducing explicit provisions on the restriction of ownership and the designation system for cultural property, and defining the basis for supporting the natural treasury. Second, the Preservation Decree admittedly had limitations as a colonial cultural property law. Article 1 of the Preservation Decree sets the standard of "Historic Enhancement or Example of Art" as a criteria for designating treasures. With the perspective of Japanese imperialism, this acted as a criterion for catering to cultural assets based on the governor's assimilation policy, revealing its limitations as a standard for preserving cultural assets. In addition, the Japanese imperialists asserted that the cultural property law served to reduce cultural property robbery, but the robbery and exporting of cultural assets by such means as grave robbery, trafficking, and exportation to Japan did not cease even after the Preservation Decree came into effect. This is because governors and officials who had to obey and protect the law become parties to looting and extraction of property, or the plunder and release of cultural property by the Japanese continued with their acknowledgement,. This indicates that cultural property legislation at that time did not function properly, as the governor allowed or condoned such exporting and plundering. In this way, the cultural property laws of the Japanese colonial period constituted discriminative colonial legislation which was selected and applied from the perspective of the Japanese government-general in the designation and preservation of cultural property, and the cultural property policy of Japan focused on the use of cultural assets as a means of realizing their assimilation policy. Therefore, this suggests that the cultural property legislation during the Japanese colonial period was used as a mechanism to solidify the cultural colonial rules of Chosun and to realize the assimilation policy of the Japanese government-general.

• Korea journal of population studies
• /
• v.31 no.3
• /
• pp.57-84
• /
• 2008

This study investigates the patterns of leisure in Korea and the effects of social class on the objective and subjective dimension of leisure activities and life satisfaction. A data set of 1376 Korean men and women over 18 years old is analyzed to yield five main results. First, Korean prefers domestic entertainment to outdoor activities as is exemplified by domestic audio-visual entertainment(TV/DVD/VCR) which ranks the highest in the favored leisure activity. Leisure activities are divided into four types; "activity-based", "relationship-based", "alcohol-based", "relaxation". Second, the function of leisure activity is to strengthen relationships. The main purpose of leisure activity is to relax and revitalize, while creating prospective social network ranks next to relax. But the effect of leisure time is often compromised by recurring thoughts related to work. Third, respondents with high educational and economic backgrounds are more likely to engage in "relationship-based," "activity-based", "alcohol-based" leisure type. However, such factors do not influence on "relaxation" type of leisure. While students and housewives rank highest in number of respondents, respondents with managerial/professional or white-collar/semi-professional occupations enjoy more diverse activities. Fourth, the effort to discern the significance of social class with respect to the leisure-activity-index revealed followings; the index scores elevate with higher education, younger age and higher income. Fifth, leisure-activity-index is the most important variable predicting leisure satisfaction. Leisure satisfaction is influenced by gender, age, income and occupation. The younger the age and higher the income, the higher it is the leisure satisfaction. Men are more satisfied with leisure activities than women. Students experience the highest satisfaction with leisure activities while service/sales workers, industrial/technical/blue-collar workers shows the least satisfaction. Also, the number of family members decreases significantly the leisure satisfaction. While "activity-based" leisure induces the highest satisfaction, "alcohol-based" leisure produces the least satisfaction. The frequency and diversity of leisure activities, and "activity-based" leisure incur the most positive effects on the life satisfaction.