• 한국소음진동공학회논문집
• /
• 제13권10호
• /
• pp.821-827
• /
• 2003

The so-called boundary node method (or NDIF method) that was developed by the authors has been extended for free vibration analysis of arbitrarily shaped plates with free edges. Since the proposed method requires no interpolation functions. no integration Procedure is needed on boundary edges of the plates and only a small amount of numerical calculation is involved, compared with FEM and BEM. In order to explain tile reason why spurious eigenvalues are generated when the NDIF method is applied to free plates, the NDIF method has been considered for free vibration analysis of both a fixed string and a free beam. Finally, verification examples show that natural frequencies obtained by the present method agree well with those given by an exact method or a numerical method (ANSYS).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
• /
• pp.85-89
• /
• 2005

For the analysis of a vibrating two dimensional structure such as the simply supported rectangular plate, Spectral Finite Element Method (SFEM) has been studied. Under the condition that two parallel edges are simply supported at least and the other two edges can be arbitrary, Spectral Finite Element has been developed. Using this element SFEM is applied to the vibrating rectangular plate which all edges are simply supported, and obtain the frequency response function in frequency domain and the dynamic response in time domain. To evaluate these results normal mode method and finite element method (FEM) are also accomplished and compared. It is seen that SFEM is more powerful analysis tool than FEM in high frequency range.

• 한국CDE학회논문집
• /
• 제6권2호
• /
• pp.111-124
• /
• 2001

In this paper, we propose rounding operations on shell meshes, which give a constant or variable radius of rounding directly to sharp edges on a shell mesh. The rolling-ball methods for freeform surface rounding are introduced to devise the algorithms for these operations. Our algorithms consists of three steps as follows: detecting sharp edges, generating a rolling-ball surface contacting with two face groups adjacent to the sharp edges, and then replacing the rounding area of the original mesh with the mesh generated on the rolling-ball surface. In addition, this paper shows their application to the area of stamping die design. These operations enable CAE engineers to directly change the meshes of stamping tools without modification of CAD models for dies and regeneration of their meshes.

• Computational Structural Engineering : An International Journal
• /
• 제1권1호
• /
• pp.49-57
• /
• 2001

This paper presents exact solutions for the modal stress-resultant distributions for vibrating rectangular Mindlin plates involving two opposite sides simply supported while the other two sides free. These exact stress-resultants of vibrating plates with free edges, hitherto unavailable, are very important because they serve as benchmark solutions for checking numerical solutions and methods. Using the exact solutions of a square plate, this paper highlights the problem of determining accurate stress-resultants, especially the transverse shear forces and twisting moments in thin plates, when employing the widely used numerical methods such as the Ritz method and the finite element method. Thus, this study shows that there is a need for researchers to develop refinements to the Ritz method and the finite element method for determining very accurate stress-resultants in vibrating plates with free edges.

• Journal of Ship and Ocean Technology
• /
• 제8권2호
• /
• pp.13-19
• /
• 2004

Jet flows applied tangential to a foil surface near the leading and/or trailing edges increase the lift of the foil by delaying the separation also known as the Coanda effects. Many experimental and numerical studies have proven the effectiveness of Coanda effects on circulation control and the effects have been found to be useful in practical application in many aerodynamics fields. Most of the previous works have studied the effects of the jet blowing near the trailing edges and investigated the influence of jet momentum on lift. A few experimental studies, however, focused on the separation bubble that develops near the leading edge and applied jet flow the edge to remove the bubble but only to find decrease in lift. In the present paper, a Coanda foil of 20% thickness ellipse with modified rounded leading and trailing edges was investigated, and the flow around the foil was numerically studied. The blowing around the leading edge only decreased the lift, as the experiments showed, but the suction considerably increased the lift.

• Management Science and Financial Engineering
• /
• 제11권1호
• /
• pp.49-61
• /
• 2005

We consider the graph disconnection problem, which is to find a set of edges such that the total cost of destroying the edges is no more than a given budget and the weight of nodes disconnected from a designated source by destroying the edges is maximized. The problem is known to be NP-hard. We present an integer programming formulation for the problem and develop an algorithm that includes a preprocessing procedure for reducing the problem size, a heuristic for providing a lower bound, and a cutting plane algorithm for obtaining an upper bound. Computational results for evaluating the performance of the proposed algorithm are also presented.

• 한국경영과학회지
• /
• 제29권1호
• /
• pp.113-125
• /
• 2004

The network disconnection problem ms to find a set of edges such that the total cost of removing the edges is no more than a given budget and the weight of nodes disconnected from a designated source by removing edges is maximized. Martel et at. have shown that the problem with unit capacity and unit demand Is NP-hard and Myung and kim present an integer programming formulation and develop an algorithm that Includes a preprocessing procedure and lower and upper bounding strateagies. in this paper, we present new findings on the properties of the optimal solution and an alternative integer programming formulation, based on which new lower and upper bounding strategies are developed. Computational results for evaluating the performance of the proposed algorithm are also presented.

• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1372-1380
• /
• 1993

본 연구에서는 당 연구실에서 개발한 곡면모델러인 CASSET(computer aided sculptured surface engineering tool)에 구현된 트리밍기능을 중심으로 트리밍곡면의 생성방법을 설명하고자 한다. 먼저 CASSET에서 곡선 및 곡면을 표현하는 방법과 곡면 위에 존재하는 곡선의 생성방법 및 곡선간의 교점을 구하는 방법을 설명하고 곡선의 트리밍 절차를 통하여 트리밍곡면의 전반적인 생성절차를 보이겠다.

• 한국가시화정보학회지
• /
• 제9권2호
• /
• pp.48-53
• /
• 2011

The shape of nozzle cross-section plays an important role in stabilizing electrospray jet. The angle of contact line is governed based on the famous Young-Laplace equation. Compared to a round nozzle that has a constant curvature along the orifice, the square nozzle has four square corner edges and four straight edges that hold the meniscus in a different manner and is of interest in this study. By utilizing both square and round capillary nozzle, we examine the effect of nozzle shape in electrohydrodynamic jetting. The ejections were recorded with a high speed camera and analyzed to examine the jetting repeatability based on dynamic movement of meniscus. The result suggests that if the corner edges are not sharp, then its effect on repeatability is also limited.

• 대한기계학회논문집
• /
• 제12권1호
• /
• pp.173-182
• /
• 1988

A program for drawing of penetrating lines was developed in personal computer. PROLOG, a language of Artificial Intelligence, was used and a data structure using relational data base was designed. An algorithm for finding the penetrating lines in the real space was developed. The program can be applied at any types of penetrating problems like curve-surface, surface-surface, curve-object, surface-object, object-object, etc. In developing the program, the following results were obtained. (1) Relational data base built in PROLOG and the function of backtracking are helpful in Computer Graphics. (2) In spite of increasing the number of edges, assigning direction to the edges makes it possible to represent the polygon meshes as the non ordered sets of directional half edges. (3) Topologicaly the penetrating lines of a polygon can be represented as the edge-pairs in the edge list of the polygon,