• Journal of Adhesion and Interface
• /
• 제6권1호
• /
• pp.1-6
• /
• 2005

The high accurate simulation of very thin glue layers based on the finite element method is still connected to many problems which result from the necessity to construct a complicated mesh of essentially different sizes of elements. This can lead to a loss of accuracy, unstable calculations and even loss of convergence. However, the implementation of special transmission elements along the glue ling and special edge-elements in the near-edge region would lead to a dramatic decrease of number of finite elements in the mesh and thus, prevent unsatisfactory phenomena in numerical analysis and extensive computation time. The theoretical basis for such special elements is the knowledge about appropriate transmission conditions and the edge effects near the free boundary of the adhesive layer. Therefore, recently proposed so-called non-classical transmission conditions and the behavior near the free edge are investigated in the context of the single-lap tensile-shear test of adhesive technology.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.43-50
• /
• 2009

In order to reduce the download around Smart UAV(SUAV) at hovering and transition mode, flow control using synthetic jet has been performed. Many of the complex tilt rotor flow features are captured including wing leading and trailing edge separation, and the large region of separated flow beneath the wing. First, in order to control the trailing edge separation, synthetic jet is located at 30, 95% of flap chord length. The flow control using synthetic jet on flap shows that stall characteristics depending on several mode can be improved through separation vortices resizing. Also, a flap jet and a 0.01c jet which control the separation efficiently are applied at the same time at each test case because controlling the leading edge separation is essential for download reduction. As a result, time averaged download is reduced about 18% comparing with no control case at hovering mode and 48% at transition mode. These research results show that if flow control using leading edge jet and trailing edge jet is used effectively to the SUAV in overall flight mode, flight performance and stability can be improved.

• Journal of Korea Multimedia Society
• /
• 제1권2호
• /
• pp.194-203
• /
• 1998

In this paper, a new DCT-VQ method is proposed which can solve the problems of VQ such as the degradation of edge and enormous calculations. VQ is carried in DCT domain but spatial domain in order to protect the degradation of edge. DCT makes high correlated image data decorrelated and the energy concentrated on a few coefficients. In DCT domain, the DC coefficient is quantized with 8 bits uniform scalar quantizer and the AC coefficients are divided to three regions and coded with vector qiantizer for considering edge components. For the decrease of the calculation and memory, the vectors for three region have small dimension of $1{\times}7$ and use the same codebook. Thus, the proposed method can fully express the edge components by considering AC coefficients in DCT domain and decrease the calculation and memory be reducing the dimension of vectors.

• Journal of the Korea Society of Computer and Information
• /
• 제12권6호
• /
• pp.261-268
• /
• 2007

In this paper, We propose a new technique extract efficiently a car number plate based on edge projection. In order to obtain the region of car number plate, we use a motive that the luminance differences between the number plate background and characters. And, we introduce a projection technique to obtain character parts based on edge image. In vertical direction. we propose a shape matching method. Specially the new number plate standard has more characters than the old one in horizontal direction and, it is efficiently used to extract the number plate. Therefore, the proposed technique is useful to the new number plate standard. In simulation results. We have illustrated that our algorithm can recognize different number plates with a success ration of 90%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제21권10호
• /
• pp.2541-2551
• /
• 1996

Human visual systems are sensitive to noise on the flat intensity area. But it becomes less sensitive on the edge area. Recently, many types of spatially adaptive image restoration methods have been proposed, which employ the above mentioned huan visual characteristics. The present paper presents an adaptive image restoration method, which increases sharpness of the edge region, and smooths noise on the flat intensity area. For edge detection, the proposed method uses the visibility function based on the local variance on each pixel. And it adaptively changes the regularization parameter. More specifically, the image to be restored is divided into a number of steps from the flat area to the edge regio, and then restored by using the finite impulse response constrained least squares filter.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• 제35D권12호
• /
• pp.48-52
• /
• 1998

We fabricated the newly proposed nano structure memory with SOI edge channel and a nano dot. The width of the edge channel of this device, which uses the side wall as a channel and has a nano dot on this channel region, was determined by the thickness of the recessed top-silicon layer of SOI wafer. The size of side-wall nano dot was determined by the RIE etch and E-Beam lithography. The I$_{d}$-V$_{d}$, I$_{d}$-V$_{g}$ characteristics of the devices without nano dots and memory characteristics of the devices with nano dots were obtained, where the voltage scan was done between -20 V and 14 V and the threshold voltage shift was about 1 V.t 1 V.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.687-690
• /
• 2017

Edge detection is an important step in determining the performance of lane recognition, object and pattern detection, and so on. And much research has been done until now. Sobel, Prewitt, Roberts, and Canny edge detection algorithms are widely known. However, these algorithms are often judged to be a non-edge region when processing a smooth change in brightness value. Therefore, in this paper, edge detection algorithm using gray-level morphology using erosion, expansion, open and close in the mask area. is proposed.

• The Journal of Korea Robotics Society
• /
• 제8권2호
• /
• pp.82-91
• /
• 2013

This paper proposes a building recognition algorithm using watershed image segmentation algorithm and integrated region matching (IRM). To recognize a building, a preprocessing algorithm which is using Gaussian filter to remove noise and using canny edge extraction algorithm to extract edges is applied to input building image. First, images are segmented by watershed algorithm. Next, a region adjacency graph (RAG) based on the information of segmented regions is created. And then similar and small regions are merged. Second, a color distribution feature of each region is extracted. Finally, similar building images are obtained and ranked. The building recognition algorithm was evaluated by experiment. It is verified that the result from the proposed method is superior to color histogram matching based results.

• Bulletin of the Korean Space Science Society
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.8-8
• /
• 1993

Field-aligned(Birkeland) currents of the High-latitude polar region are to the linkage between the solar wind-magnetosphere system and the ionosphere. The characteristics of field-aligned currents at an attitude of 1300 km have been investigated from the KiSat-A satellite magnetometer data recorded at SatRec form March to May 1993. It is found that the po1arity of both east-west and south-north magnetic components becomes reversed and distorted across the poleward edge. We suggest that these changes May occur rule to the Region 1 and Region 2 currents. It is also suggested that the current time resolution which is about 30 seconds, should be improved to prove gradual polarity changes in the polar region. In addition, it is shown how the observational results depend on the longitude in the high-latitude region.

• Korean Journal of Remote Sensing
• /
• 제33권5_1호
• /
• pp.571-585
• /
• 2017

The number of spaceborne optical sensors including red-edge band has been increasing since red-edge band is known to be effective to enhance the information content on biophysical characteristics of vegetation. Considering that the Agriculture and Forestry Satellite is planning to carry an imaging sensor having red-edge band, we tried to analyze the current status and potential of red-edge band. As a case study, we analyzed the effect of using red-edge band and tried to find the optimum band width and wavelength region of the red-edge band to estimate leaf area index (LAI) of very dense tree canopy. Field spectral measurements were conducted from April to October over two tree species (white oak and pitch pine) having high LAI. Using the spectral measurement data, total 355 red-edge bands reflectance were simulated by varying five band width (10 nm, 20 nm, 30 nm, 40 nm, 50 nm) and 71 central wavelength. Two red-edge based spectral indices(NDRE, CIRE) were derived using the simulated red-edge band and compared with the LAI of two tree species. Both NDRE and CIRE showed higher correlation coefficients with the LAI than NDVI. This would be an alternative to overcome the limitation of the NDVI saturation problem that NDVI has not been effective to estimate LAI over very dense canopy situation. There was no significant difference among five band widths of red-edge band in relation to LAI. The highest correlation coefficients were obtained at the red-edge band of center wavelength near the 720 nm for the white oak and 710 nm for the pitch pine. To select the optimum band width and wavelength region of the red-edge band, further studies are necessary to examine the relationship with other biophysical variables, such as chlorophyll, nitrogen, water content, and biomass.