• 한국안전학회지
• /
• 제29권5호
• /
• pp.15-21
• /
• 2014

The aim of this work is conduct the study on light weight and structural performance improvement of the composite wind power blade. GFRP (Glass Fiber Reinforced Plastic) pre-empted by CFRP(Carbon Fiber Reinforced Plastic), the major material of wind power blade, was identified the superiority of mechanical performance through the tensile and fatigue test. SENT(Single Edge Notched Tension) specimen fracture test was conducted on the specimen that laminated together 2 ply CFRP with 4 ply GFRP through DIC(Digital Image Correlation) analysis. The SENT specimen thickness and $a_0/W$ ratio is 1.45 mm and 0.2, respectively. The fracture test accomplished with displacement control with 0.1 mm/min at the room temperature. The experimental apparatus used for the fracture test consisted of a 50kN universal dynamic tester and CCD camera connected to a personal computer (PC), which was used to record images of the specimen surface. Following data acquisition, the images and load-displacements were transferred to the PC, on which the DIC software was implement. The experiment and DIC analysis results show that CFRP/GFRP laminated composite exhibits improvement of the strength, compared with that of the existing blade material. This study shows the result that the strength of CFRP rotor blade of wind turbine satisfies through the experimental and DIC method.

• 대한치과보철학회지
• /
• 제9권1호
• /
• pp.35-40
• /
• 1969

The author measured vertical dimension of 675(326 of male and 349 of female) in normal Korean adult from 20 to 50 years of age between upper and lower muco-buccal fold on upper and lower central incisal portion at centric occlusion state. The following results were obtained.; 1) The distances from upper muco-buccal fold on upper anterior central incisal portion to lower muco-buccal fold on lower anterior central incisal portion at centric occlusion state were 37.57mm in male, 36.80mm in female and 37.19mm in average. The distances in male were longer than those of female. 2) According to increase age(from 20 to 50 years of age), the tendencies of vertical dimensional changes were increased slightly in 30~40 years group and decreased after 40 year in both sex. 3) The distances from upper muco-buccal fold on upper anterior central portion to upper central incisal edge were 20.77mm and from lower muco-buccal fold on lower anterior central incisal portion to lower central incisal edge were 18.88mm. The ratio between maxillary distances and mandibular distances was 1.4:0.9.

• 한국공간구조학회논문집
• /
• 제20권3호
• /
• pp.91-98
• /
• 2020

For form stability of membrane structures, membrane material is required to be in tension. Therefore, in planning and maintenance management, the engineer should consider enough about introduction of stress during construction and re-introduction of stress after completion. Clamping part is an important portion with the function for introducing tension into membrane materials, and the function to transmit stress to boundary structures, such as steel frames. Then, the purpose of this research is to clarify stress condition and stress transfer mechanism including clamping part of membrane structures, and to grasp the changing tendency of membrane structures with the passage of time. In this research, following previous one, we perform well-balanced evaluation by conducting tensile fractured tests of clamping part's specimens, and by measuring individually the amount of displacement of not only overall specimen's length but membrane material and clamping part. Thereby, we consider the influence the difference in the hardness of edge rope and the difference in the direction of thread affect modification and fracture load.

• 전자공학회논문지D
• /
• 제36D권4호
• /
• pp.77-85
• /
• 1999

본 논문은 진성영역에서 공핍증 폭이 선형적으로 변화한다는 가정을 도입하고 전자이동도의 수평 및 수직 전계 이존성을 고려하여 단채널 MOSFET의 {{{{ { I-V }_{ } }}}} 특성에 대한 해석적 모형을 제시하였다. 이 모형으로부터 전 동작영역에 걸쳐 적용되는 문턱전압 방정식과 드레인전류 방정식을 도출하였다. 본 모형의 타당성을 검토하기 위하여 위 식들의 계산을 수행하였고, 그 결과 채널길이가 짧아짐에 따라 문턱전압이 지수함수적으로 감소하였으며, 아울러 채널길이변조, 채널이동로 열화 등을 본 모형에 의하여 일괄적으로 설명할 수 있었다.

• Animal Systematics, Evolution and Diversity
• /
• 제31권4호
• /
• pp.277-283
• /
• 2015

Two pleurostomatid ciliates, Loxophyllum perihoplophorum Buddenbrock, 1920 and L. rostratum Cohn, 1866, were collected from the coastal waters of the East Sea, Korea. Their morphologies are described based on live observation and protargol staining, and morphometrics are provided. Loxophyllum perihoplophorum is characterized by the following features: 200-650 μm long in vivo; body slender leaf-shaped, flexible and contractile, with thin and wide extrusome-belted zone; 2 macronuclear nodules (Ma) and 1 micronucleus (Mi); 7-9 contractile vacuoles (CV) positioned along dorsal margin; extrusomes (Ex) evenly distributed along edge of entire body, with about 10 dorsal warts (Wa); 9-11 left (LSK) and 19-22 right somatic kineties (RSK), 4-5 furrows (Fu) on left side. Loxophyllum rostratum is about 100-130 μm long in vivo; body oblate leaf-shaped, contractile, convex ventral side and S-shaped dorsal side, beak-like anterior end; 2 Ma and 1 Mi; 1 CV terminally located; Ex distributed along edge of entire body, with about 9-10 dorsal Wa; 7-8 LSK and 15-19 RSK, ca. 5 Fu on left body side. In addition, sequences of small subunit ribosomal DNA were determined from these two Loxophyllum species and compared with the known Loxophyllum sequences.

• Restorative Dentistry and Endodontics
• /
• 제15권1호
• /
• pp.20-32
• /
• 1990

The plane strain fracture toughness of a material characterize the resistance to fracture in the presence of a sharp crack under severe tensile condition. Fracture toughness can be determined by indentation method. The purpose of this study was to investigate the fracture toughness of dental amalgams by measuring the plane strain fracture toughness and the fracture toughness from indentation method. Two conventional and four high copper amalgam alloys were employed for this study. The amalgams were prepared according to the A.D.A. spec. No. 1 and inserted into the specially designed mould with the single edge notch specimen to use in 3-point bending method. The specimens (20mm long, 4mm wide, 2mm thick) were stored at $37^{\circ}C$ for 1 week, and tested in 3-point bending by means of Instron at a cross-head speed of 1mm/min. In indentation method, the specimens were made in same manner as single edge notch specimens. The test was conducted with Vickers hardness tester at 10kg load. The following results were obtained. 1. The plane strain fracture toughness and the fracture toughness from indentation method were higher in the low copper amalgams than the high copper amalgams. 2. In high copper amalgams, the fracture toughness of amalgams decreases according as the copper contents increase. 3. In similar copper contents, the single composition amalgams have a higher fracture toughness than the admixed amalgams.

• 수산경영론집
• /
• 제35권1호
• /
• pp.1-22
• /
• 2004

Since the red grouper stock was initially declared to be overfished by the NMFS in September 2002, the Gulf of Mexico Fishery Management Council must prepare for the red grouper rebuilding plan considering the following alternative management policies: Total Allowable Catch(TAC), 5 - month season closure, 1800 - pound trip limit, and 50 - fathom longline boundary. The first concern the Council has is to evaluate the effects of recommended policies and the second is to analyze the impact of management policies on yellow edge grouper. This is because the fleets harvest red grouper also catch yellowedge grouper, the regulations on red grouper are likely to allow fishing effort to be distributed into yellowedge grouper. Therefore, this study is aimed at evaluating the biological and economic effects of management policies considering simultaneously the impact of red grouper regulations on yellow edge grouper by developing a combined red grouper and yellowedge grouper bioeconomic model. The overall results indicate that management policies for red grouper would adversely affect the yellowedge grouper stock if yellowedge grouper is not protected by its regulations. The TAC policy has the most serious impact on the yellowedge grouper stock, while the 1800 - pound trip limit policy minimizes the reduction in the yellowedge grouper stock. However, the target stock size of red grouper is achieved as well as the largest net present value of returns is gained in the TAC policy.

• 전산구조공학
• /
• 제10권2호
• /
• pp.131-138
• /
• 1997

이 논문에서는, 균일한 횡방향 인장변형률이 작용하는 조건에서 강체모재들을 결합하고 있는 점탄성 접착재층의 계면모서리에 발생하는 응력 특이성을 조사하고있다. Williams방법을 응용하여 라플라스 변형공간에서 특성방정식을 구하였고, 주어진 점탄성 모델에 대해서 변형공간에서의 특성방정식을 시간공간으로 해석적으로 전환하였다. 시간 공간에서의 특이차수는 수치적으로 계산하였다. 계면을 따라 발생하는 응력의 특성을 조사하는데 시간영역 경계요소법을 적용하였다. 수치해석 결과에 의하면, 특이차수는 시간이 경과함에 따라 커지는 반면에, 자유모서리 응력확대계수는 시간에 따라 이완되는 특성을 보여주고 있다.

• 한국식품조리과학회지
• /
• 제10권3호
• /
• pp.232-237
• /
• 1994

이 연구에서는 냉동피자에 대한 텍스쳐 프로필을 수행하여 전통적인 오븐과 microwave 오븐으로 가열한 피자의 텍스쳐 품질을 비교하였다. 개발된 텍스쳐 특성은 29가지였으며, 눈과 손으로 평가하는 단계, 입술에 대한 촉감, 한번 씹는 단계, 저작 단계, 그리고 삼키는 단계의 다섯 단계로 평가되었다. microwave로 가열된 피자가 전통적인 오븐으로 가열한 피자보다 더 바삭바삭하고 덜 부드럽다고 평가되었다. 피자를 가장자리와 중심부위로 나누어 평가시 top greasiness, wetness of sauce on plate, moisture release의 특성에서만 큰 차이를 나타내어 피자의 텍스쳐 평가시 꼭 두 부위를 나누어 평가할 필요는 없었다고 할 수 있다. 피자의 가장자리는 가운데 부분보다 덜 기름지고 덜 촉촉하다고 평가되었는데 microwave 오븐으로 가열된 피자의 경우 단시간내에 고열을 받으며 가장자리가 더 빨리 익혀지기 쉬우므로 결과적으로 더 건조해졌기 때문이라고 생각된다.

• 대한금속재료학회지
• /
• 제48권7호
• /
• pp.651-659
• /
• 2010

When high-speed interrupted cutting is carried out for die and mold steels with high hardness, CBN tools manifested a significantly longer wear life than carbide, ceramic, or cermet tools in an experiment of face milling characteristics. In addition, it was also found that they secured a stable surface roughness within a range of 1.6 S~6.3 S, an acceptable range for precision machining for polished machining parts. And it makes them acceptable in the precision machining field, except in industries where very high machining accuracy is required. In the high hardness interrupted cutting, it was advantageous to perform a negaland treatment and a honning treatment on the tools' cutting edge to extend tool life and surface roughness. Also, severe crater development was found on the sloped face in CBN tools following high-speed machining. This caused the cutting edge to be weakened and damaged, and ultimately resulted in a shorter tool life. Finally, as a result of EDX mapping inspection, Cr component was detected evenly on the entire crater wear area, which can be included only in STD 11.