• Journal of Korea Port Economic Association
• /
• v.28 no.2
• /
• pp.61-75
• /
• 2012

This study is to develop a curriculum for training workers in the port logistics field. NSC is a standardized method improving the capability and knowledge scientifically and systematically in order for individual to carry out its own job and task successfully. To develop a curriculum for workers in the port logistics field, the following methodology is used. First, questionnaire is carried out. Second, a MECE method is used to draw out a proper education programme. This study can contribute to improving the job capability of employers working at the port logistics industry. Further, it can improve firms' competitive power and furthermore national competitive edge by introducing the filed-oriented training programme to port logistics industry. In the future, a developed education is to be applied and evaluated through more intensified industry, academy, research linkage.

• Journal of Korea Multimedia Society
• /
• v.9 no.10
• /
• pp.1282-1295
• /
• 2006

This paper proposes a method of image tile mosaics to preserve detailed depiction of the source image. This method enhance the shortcoming of the previous mosaic methods that cannot express the detailed depiction because of the gap between tiles. Our method is implemented by the usage of image tiles to preserve detailed depiction of the source image, as well as the usage of 2-layered tiles to.eliminate the gap between tiles. The method suggested in this paper are composed of following process. First of all, the position of the upper layer tile is located through a centroidal voronoi diagram to which an edge avoidance technique is applied, and the position of the lower layer tile is calculated using Delaunay triangulation. Secondly, discover the size and direction field of the tile considering the relation between tiles. Thirdly, adopt a photomosaic technique to use the image tiles. At this time, the technique of multi-level indexing is used to accelerate the speed of image searching. Through above process, the gap between tiles is minimized against other methods and a mosaic image with a maximized detailed description is achieved.

• The korean journal of orthodontics
• /
• v.22 no.1
• /
• pp.123-131
• /
• 1992

This study was done to evaluate the changes of enamel surface by interproximal stripping and recovery of it by polishing. The number of 34 1st premolars which had extracted for orthodontic treatment were selected as samples. Interproximal stripping was performed by hand with metal strip and strip placer (Dentaurum Co., Germany) and low speed handpiece with diamond disk (Superdiaflex, Germany). Polishing was performed by hand with plastic strip (3M Col) and low speed handpiece with whip-mix, DCPA (Dicalcium Phosphate, Anhydrous, $CaHPO_4$) powder and Sof-lex (3M Co. U.S.A.) polishing kit. Each groups were examined under the scanning electron microscope (JEOL Co., JSM-840A, Japan) and the following results were obtained: 1. The stripped group performed by metal strip and diamond disk altogether showed deep furrow on the enamel surface as wide as about $10{{\mu}m}$. 2. There could be seen more irregular scratched line in the group stripped by metal strip than that by diamond disk. 3. The polished group performed by plastic strip and DCPA powder showed slight smoothening of the edge of stripped furrow on the enamel surface without relation to the stripping method. 4. The polished group performed by Sof-lex progressive polishing kit could not avoid the formation of the furrows on the enamel surface according to the particle size without relation to the stripping method. 5. The polished group performed by the superfine polishing wheel, the final stage of Sof-lex polishing method showed shallow scratched line as wide as within about $2{{\mu}m}$ on the enamel surface without relation to the stripping method. 6. The interproximal stripped enamel surface could not recover its original surface texture by any kind of polishing methods.

• Journal of the Korean Society of Costume
• /
• v.54 no.4
• /
• pp.145-156
• /
• 2004

This study is regarding closed and open forms, which have relatively high recognition among visual perception phenomena in costumes. In particular, this study reviewed closeness and openness of ethnic look, which is a representative open costume. Closed form can be summarized as simple and clear silhouette, conspicuous differentiation from the background, simple construction of the costume and colors with low brightness and clearness. It Is modern, functional, rational and modest. On the other hand, open form can be summarized as complicated and inconspicuous edge line, complicated inner shape and colors with high brightness, high clearness and vividness. It includes concepts of pleasure, entertainment, joy, eroticism, rebel and resistance. Modern costumes have been simplified for a long time and they have functional and closed characteristics in their shape, structure and form. On the other hand, modern open form costumes are usually found in sub-cultural styles such as punk, hippie, kitsch and vintage, and some ethnic looks. Following is a summary of the characteristics of open form shown in the ethnic look. 1. The shape, structure of costumes, hair accessories, lace, ruffle and ornaments are complicated and irregular. 2. The silhouette is inconspicuous because of ambiguity between backgrounds and ABC (Apparel-Body-Construct) or the use of see-through materials. 3. It makes complicated visual shapes because it does not have a single type but is composed of various clothing items together. 4. It gives complex feelings by matching various colors or more than two different fabrics. 5. It looks like the open type because of the complex patterns shown in the costumes.

• KIEAE Journal
• /
• v.17 no.3
• /
• pp.59-67
• /
• 2017

Purpose: As we are facing the global crisis from the climate change and energy depletion, urgent actions are needed to design a integrated sustainable building. This paper suggests that a sustainable design awards can stimulate for architects to bring the cutting-edge ideas into a realized building in comparison to green building certification system. AIA COTE Top 10 design awards, organized and run by AIA(American Institute of Architects) COTE(Committee on the Environment) from 1997, is analyzed as a case study. By researching the core of the AIA COTE Top 10 design awards system in terms of evaluation measures and submission requirements, meaningful suggestions were drawn to supplement Korea Green Building Awards system and to design and realize leading green buildings in Korea. Method: The comparison between AIA COTE Top 10 and Korea Green Building Design Awards was made in terms of evaluation measures, submission requirements, and green building certification systems. Result: This paper finally suggests the following three points in conclusion: 1) Set the standards of evaluation measures reflecting the three aspects(economy, environment, social) of sustainability, 2) Set the qualitative evaluation measures and corresponding submission requirements that can apply in the design awards in comparison to green building certification system, 3) Develop and balance submission requirements in response to evaluation measures to proceed systematic evaluation of the green buildings.

• Restorative Dentistry and Endodontics
• /
• v.15 no.2
• /
• pp.17-33
• /
• 1990

The purpose of this study was to evaluate the fracture toughness of dental composite resins and to investigate the filler factor affecting the fracture behaviour on which the degree of fracture toughness depends. Six kinds of commercially available composite resin;, including two of each macrofilled, microfilled, and hybrid type were used for this study, The plane strain fracture toughness ($K_{10}$) was determined by three-point bending test using the single edge notch specimen according to the ASTM-E399. The specimens were fabricated with visible light curing or self curing of each composite resin previously inserted into a metal mold, and three-point bending test was conducted with cross-head speed of 0.1mm/min following a day's storage of the specimens in $37^{\circ}C$ distilled water. The filler volume fractions were determined by the standard ashing test according to the ISO-4049. Acoustic Emission(AE), a nondestructive testing method detecting the elastic wave released from the localized sources In material under a certain stress, was detected during three-point bending test and its analyzed data was compared with, canning electron fractographs of each specimen. The results were as follows : 1. The filler content of composite resin material was found to be highest in the hybrid type followed by the macrofilled type, and the microfilled type. 2. It was found that the value of plane strain fracture toughness of composite resin material was in the range from 0.69 MPa$\sqrt{m}$ to 1 46 MPa$\sqrt{m}$ and highest In the macrofilled type followed by the hybrid type, and the microfilled type. 3. The consequence of Acoustic Emission analysis revealed that the plane strain fracture toughness increased according as the count of Acoustic Emission events increased. 4. The higher the plane strain fracture toughness became, the higher degree of surface roughness and irregularity the fractographs demonstrated.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.3
• /
• pp.168-175
• /
• 2006

The cultural grounds of lave r have been surveyed using SPOT-5 satellite images. The facilities of laver cultivation area in the coastal waters of Korea were calculated. 10 m resolution multispectral images of SPOT-5 are adopted for the southern are a of Jebu Island, Hwaseong city to develop an automatic detection approach of laver nets that consists of the following: band difference technique, canny edge detector and morphological analysis: The number of satellite-based facilities was relatively high as compared with the licensed number in 2005, 676,749 chaek and 572,745 chaek(柵, unit of measure for laver farm), respectively. The ratio of a law abiding facility was very low at 52.9%. These data could be applied to control its national production keeping a stable market price for the government body.

• Archives of Plastic Surgery
• /
• v.36 no.1
• /
• pp.122-125
• /
• 2009

Purpose: Stitching out in facial simple laceration on children, we use No.11 blade. But the procedure is technically demanded to take care of the uncooperative pediatric patient. When we suture a laceration on the pediatric patient, we apply this method using ribbon shaped knot. On stitching out, We pull one the edge of a stitching fiber easily without injury about normal tissue. Methods: We studied 54 pediatric patients who have facial lacerations for children under six years old, from May, 2006 to December, 2007 in Plastic Surgery department, emergency room. Among them 35 were male, 19 were female and age average was 3.9. Results: For following up dressing, ribbon shaped knot did not get loose. After stitching out in facial laceration on children, Major complication of infection, hematoma, dehiscence was not found. Conclusion: The advantage of this operation method using ribbon shaped knot when we Stitch out the fiber on the incorporative pediatric patients, is easy to perform and to reduce the stitching time, without sedation.

• Archives of Plastic Surgery
• /
• v.35 no.4
• /
• pp.446-449
• /
• 2008

Purpose: Pilonidal sinus is a frequent disease that occurs mostly in hairy young men, defined as chronic inflammation and infection of the postsacral sinuses. Wide excision of the affected area is the treatment of choice. Many techniques have been described to cover the defect. However none appears to be the ideal procedure to prevent infection, recurrence, and delayed wound healing. We present the results of an alternative technique that we performed by using partial deepithelized gluteal transposition flap for reconstruction of the defect following wide excision. Methods: From October 2004 to September 2007, we performed the partial deepithelized gluteal transposition flap method on 6 patients. We modified the transposition flap techniques by deepithelialising the medial parts of the flap and burying them under the opposing edge of the flap. The results were compared with previous studies and evaluated regarding duration of surgery, size of defect, hospitalization periods, and complications. Results: All the flaps were healed well with no partial or complete loss of the flap. Hospitalization and immobilization periods were acceptably shortened. Recurrence was not seen. The aesthetic outcome was also satisfactory and all patients were satisfied with the results. Conclusion: The main advantage of our techniques is using healthy tissues to obliterate the dead space, to provide an extra-cushion, and to prevent deep dehiscence. We believe that the partial deepithelized gluteal transposition flap is a good alternative method for treatment of pilonidal sinus.

• Restorative Dentistry and Endodontics
• /
• v.23 no.2
• /
• pp.690-700
• /
• 1998

Rubber-toughened particles which are used in the field of chemical engineering are used to increase the fracture toughness of thermoset resin. The application of Core-Shell particles, one of rubber-toughened particles, as a filler for dental composite or restoration have not been examined. The purpose of this study was to evaluate possible use of Core-Shell particles for dental composite, and the hypothesis was that additional toughening mechanisms are activated by the addition of Core-Shell particles. After blending 50vol% quartz with Bis-GMA/TEGDMA resin matrix, the experimental resins were made by the addition of Core-Shell particles with varied content level as 0, 2.5, 5, 7.5, 10, 12.5, 15, and 20wt%. Fracture toughness was determined on three-point bending specimen with single-edge notch according to ASTM-E 399. Also, flexural properties, that is, strength and modulus were measured by three-point bending testing. Fractogragh of fracture toughness specimen was observed using SEM (JEOL 6400 SEM, MA). The following results from this study were obtained ; 1. Fracture toughness of composite resin added 2.5wt% Core-Shell particles was significantly higher than control group ($p{\leq}0.05$). 2. Flexural properties were decreased with increasing Core-Shell particle content, which showed a correlation statistically ($p{\leq}0.05$). 3. A toughening mechanism such as lamination and microcrack was observed in specimen determined high fracture toughness. 4. The dispersion of Core-Shell itself and quartz filler particles was limited present high content of Core-Shell particles, which decreased a resulting mechanical properties of composites. These results suggest that adequate Core-Shell particles can be used to enhance mechanical properties included toughening for dental composites.