• Journal of Communications and Networks
• /
• v.3 no.4
• /
• pp.324-333
• /
• 2001

The Differentiated Services (Diffserv) framework has been proposed by the IETF as a simple service structure that can provide different Quality of Service (QoS) to different classes of packets in IP networks. IP packets are classified into one of a limited number of service classes, and are marked in the packet header for easy classification and differentiated treatments when transferred within a Diffserv domain. The Diffserv framework defines simple and efficient QoS differentiation mechanisms for the Internet. However, the original Diffserv concept does not provide a complete QoS management framework. Since traffic flows in IP networks are unidirectional from one network point to the other and routing paths and traffic demand get dynamically altered, it is important to monitor end-to-end traffic status, as well as traffic status in a single node. This paper suggests a distributed QoS monitoring method that collects the statistical data of each service class in every Diffserv router and calculates edge-to-edge QoS of the aggregated IP flows by combining routing topology and traffic status. A format modeling of edge-to-edge Diffserv flows and algorithms for aggregating edge-to-edge QoS is presented. Also an SNMP-based QoS management prototype system for Diffserv networks is presented, which validates our QoS management framework and demonstrates useful service management functionality.

• Journal of information and communication convergence engineering
• /
• v.20 no.3
• /
• pp.166-173
• /
• 2022

Recently, studies have been conducted on intelligent transportation systems (ITS) that provide safety and convenience to humans. Systems that compose the ITS adopt architectures that applied the cloud computing which consists of a high-performance general-purpose processor or graphics processing unit. However, an architecture that only used the cloud computing requires a high network bandwidth and consumes much power. Therefore, applying edge computing to ITS is essential for solving these problems. In this paper, we propose an edge artificial intelligence (AI) device based ITS. Edge AI which is applicable to various systems in ITS has been applied to license plate recognition. We implemented edge AI on a field-programmable gate array (FPGA). The accuracy of the edge AI for license plate recognition was 0.94. Finally, we synthesized the edge AI logic with Magnachip/Hynix 180nm CMOS technology and the power consumption measured using the Synopsys's design compiler tool was 482.583mW.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.1
• /
• pp.138-140
• /
• 2020

As the IoT is applied to home and industrial networks, data generated by the IoT is being processed at the cloud edge. Intrusion detection function is very important because it can be operated by invading IoT devices through the cloud edge. Data delivered to the edge network in the cloud environment is traffic at the application layer. In order to determine the intrusion of the packet transmitted to the IoT, the intrusion should be detected at the application layer. This paper proposes the intrusion detection function at the application layer excluding normal traffic from IoT intrusion detection function. As the proposed method, we obtained the intrusion detection result by decision tree method and explained the detection result for each feature.

• Journal of Sensor Science and Technology
• /
• v.15 no.2
• /
• pp.112-119
• /
• 2006

Resolution of an image sensor is very significant parameter to improve. It is hard to improve the resolution of the CMOS vision chip for edge detection based on a biological retina using a resistive network because the vision chip contains additional circuits such as a resistive network and some processing circuits comparing with general image sensors such as CMOS image sensor (CIS). In this paper, we proved the problem of low resolution by separating photo-sensing and signal processing circuits. This type of vision chips occurs a problem of low operation speed because the signal processing circuits should be commonly used in a row of the photo-sensors. The low speed problem of operation was proved by using a reset decoder. A vision chip for edge detection with $128{\times}128$ pixel array has been designed and fabricated by using $0.35{\mu}m$ 2-poly 4-metal CMOS technology. The fabricated chip was integrated with optical lens as a camera system and investigated with real image. By using this chip, we could achieved sufficient edge images for real application.

• Journal of Korean Institute of Industrial Engineers
• /
• v.20 no.3
• /
• pp.3-14
• /
• 1994

In this study, two reliability computational algorithms which respectively utilize a factoring method are proposed for a system represented by reliability block diagram. First, vertex factoring algorithm is proposed. In this algorithm, a reliability block diagram is considered as a network graph with vertex reliabilities. Second algorithm is mainly concerned with conversion of a reliabilities block diagram into a network graph with edge reliabilities. In this algorithm, the independence of edges is preserved by eliminating replicated edges, and in computing the reliability of a converted network graph, existing edge factoring algorithm is applied. The efficiency of two algorithms are compared for example systems with respect to computing times. The results shows that the second algorithm is shown to be more efficient than the first algorithm.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.1
• /
• pp.11-20
• /
• 2014

Many classification studies for the community of densely-connected nodes are limited to the comprehensive analysis for detecting the communities in probabilistic networks with nodes and edge of the probabilistic distribution because of the difficulties of the probabilistic operation. This study aims to use convolution method for operating nodes and edge of probabilistic distribution. For the probabilistic hierarchy network with nodes and edges of the probabilistic distribution, the model of this study detects the communities of nodes to make the new probabilistic distribution with two distribution. The results of our model was verified through comparing with Monte-carlo Simulation and other community-detecting methods.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.429-437
• /
• 1999

Width variation of the top and bottom ends of steel at finishing rolling in a plate, has been investigated. It was found that width variation after finishing rolling is affected by edging, broadside rolling ratio, longitudinal rolling ratio, width shape after broadside rolling, temperature, width-to-thickness ratio, and so on. A neural network modelling of back propagation has been conducted on the width variation during rolling. Based on these prediction models, a width control system, by which the roll opening and closing of the hydraulic AWC edger can be adjusted during edge rolling in finishing rolling passes, has been developed. Compared to conventional width model, the neural network model is much accurate in a model. The width control system is applied to a newly built production mill.

• International Journal of Advanced Culture Technology
• /
• v.6 no.3
• /
• pp.142-150
• /
• 2018

This paper describes the algorithm that lowers the dimension, maintains the object recognition and significantly reduces the eigenspace configuration time by combining the edge orientation histogram and principle component analysis. By using the detected object region as a recognition input image, in this paper the object recognition method combined with principle component analysis and the multi-layer network which is one of the intelligent classification was suggested and its performance was evaluated. As a pre-processing algorithm of input object image, this method computes the eigenspace through principle component analysis and expresses the training images with it as a fundamental vector. Each image takes the set of weights for the fundamental vector as a feature vector and it reduces the dimension of image at the same time, and then the object recognition is performed by inputting the multi-layer neural network.

• Industrial Engineering and Management Systems
• /
• v.10 no.4
• /
• pp.238-246
• /
• 2011

Given a directed graph, we can determine how the user's preference moves from one product item to another. In this graph called "preference transition network", each node represents the product item while its edge pointing to the other nodes represents the transition of user's preference. However, with the large number of items make the network become more complex, unclear and difficult to be interpreted. In order to address this problem, this paper proposes a visualization technique in preference transition analysis based on recency and frequency. By adapting these two elements, the semantic meaning of each item and its transition can be clearly identified by its different types of node size, color and edge style. The experiment in a sales data has shown the results of the proposed approach.

• The Journal of Korea Robotics Society
• /
• v.17 no.2
• /
• pp.118-123
• /
• 2022

We implemented a real-time cloud robotics application by offloading robot navigation engine over to 5G Mobile Edge Computing (MEC) sever. We also ran a fleet management system (FMS) in the server and controlled the movements of multiple robots at the same time. The mobile robots under the test were connected to the server through 5G SA network. Public 5G network, which is already commercialized, has been temporarily modified to support this validation by the network operator. Robot engines are containerized based on micro-service architecture and have been deployed using Kubernetes - a container orchestration tool. We successfully demonstrated that mobile robots are able to avoid obstacles in real-time when the engines are remotely running in 5G MEC server. Test results are compared with 5G Public Cloud and 4G (LTE) Public Cloud as well.