• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1221-1226
• /
• 2019

The importance of livestock production of agriculture in Korea is very large. Investments in sanitation facilities and environmental factors such as animal health and odor have been relatively crude, and over the past few years animal disease has emerged as the leading cause of domestic livestock farmers' income stability. There is a need for an access control system that can be purchased and installed by small and medium-sized farmers who are suffering from pollutants and small farmers who can not afford to install costly sterilization on an economical basis. In this paper, based on the plasma access control system proposed previously, we developed an ICT surveillance access control prototype system that can ensure safety and security through access control and integrated control system that introduces a sterilization system using plasma required by farmers affected by pollutants.

• Steel and Composite Structures
• /
• v.27 no.5
• /
• pp.537-543
• /
• 2018

Mechanical shear connectors are commonly used to transfer longitudinal shear forces across the steel-concrete interface in composite beams. Steel pipe as a new shear connector is proposed in this research and its performance to achieve composite strength is investigated. Experimental monotonic push-out tests were carried out for this connector. Then, a nonlinear finite element model of the push-out specimens is developed and verified against test results. Further, the finite element model is used to investigate the effects of pipe thickness, length and diameter on the shear strength of the connectors. The ultimate strengths of these connectors are reported and their respective failure modes are discussed. This paper comprises of the push-out tests of ten specimens on this shear connector in both the vertical and horizontal positions in different reinforced concretes. The results of experimental tests are given as load-deformation plots. It is concluded that the use of these connectors is very effective and economical in the medium shear demand range of 150-350 KN. The dominant failure modes observed were either failure of concrete block (crushing and splitting) or shear failure of pipe connector. It is shown that the horizontal pipe is not as effective as vertical pipe shear connector and is not recommended for practical use. It is shown that pipe connectors are more effective in transferring shear forces than channel and stud connectors. Moreover, based on the parametric study, a formula is presented to predict the pipe shear connectors' capacity.

• Journal of Animal Environmental Science
• /
• v.8 no.3
• /
• pp.191-198
• /
• 2002

This study was conducted to determine changes in internal temperature and chemical composition during the composting of broiler litter(BL) and to evaluate the feasibility of use of a small-scale pelletizer for the pelleting of composted BL. BL was composted for 4 weeks in an wooden cell with a size of 1 m length $\times$ 1 m width $\times$ 1.2 m height. Internal temperature reached to peak(68$^{\circ}C$) at the fourth day and thereafter gradually reduced. Among chemical components in BL, composting reduced organic matter content and increased dry matter and indigestible protein(ADF-CP) contents. When BL was pelleted using an economical small-scale pelletizer, the proper die diameter was 8~18 mm and the proper moisture content of composted BL was 20~25%. Beyond these proper conditions, addition of heat and pressure or pellet aids may be necessary. Pelleting of BL resulted in nearly threefold increase of bulk density, significant moisture evaporation, and little change in chemical components except for increased indigestible protein. In conclusion, BL may be converted into a feed with low to medium nutrition by the composting and pelleting process.

• Journal of Plant Biotechnology
• /
• v.34 no.2
• /
• pp.81-93
• /
• 2007

Gas hydrates are known to form by physical interactions between host water and guest gas molecules and thus can be treated as a special type of icy materials. The gas hydrates are recently highlighted because of their use to future energy source even though they were discovered naturally in the deep-sea marine sediments a long time ago. However, the present and future urgent task is to develop the efficient and safe production technology for recovering methane from gas hydrates. Here, we propose one of potential recovery processes using swapping phenomenon occurring between gaseous carbon dioxide and methane hydrate deposits. Such a swapping process provide several technological and economical advantages over conventional processes. The carbon dioxide can be directly sequestered into methane hydrate layer and simultaneously methane can be produced with a high recovery rate more than 90%. In addition, the icy powders can be effectively used as a new medium for storing hydrogen. To increase hydrogen storage capacity the icy hydrate networks need to be redesigned to create the more empty cages in which hydrogen gas can be enclathrated. Functionalized icy materials might be used in a variety of energy and environmental fields.

• Steel and Composite Structures
• /
• v.22 no.1
• /
• pp.113-139
• /
• 2016

The nonlinear seismic responses of steel buildings with perimeter moment resisting frames (PMRF) and interior gravity frames (IGF) are estimated, modeling the interior connections first as perfectly pinned (PPC), and then as partially restrained (PRC). Two 3D steel building models, twenty strong motions and three levels of the PRC rigidity, which are represented by the Richard Model and the Beam Line Theory, are considered. The RUAUMOKO Computer Program is used for the required time history nonlinear dynamic analysis. The responses can be significantly reduced when interior connections are considered as PRC, confirming what observed in experimental investigations. The reduction significantly varies with the strong motion, story, model, structural deformation, response parameter, and location of the structural element. The reduction is larger for global than for local response parameters; average reductions larger than 30% are observed for shears and displacements while they are about 20% for bending moments. The reduction is much larger for medium- than for low-rise buildings indicating a considerable influence of the structural complexity. It can be concluded that, the effect of the dissipated energy at PRC should not be neglected. Even for connections with relative small stiffness, which are usually idealized as PPC, the reduction can be significant. Thus, PRC can be used at IGF of steel buildings with PMRF to get more economical construction, to reduce the seismic response and to make steel building more seismic load tolerant. Much more research is needed to consider other aspects of the problem to reach more general conclusions.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.209-219
• /
• 2007

Since 100PPM Quality Certification System has been established by the Industrial Advancement Administration in 1995, 100PPM duality Innovation movement has contributed much to the enhancement of qualify competitiveness of Korea's parts industry. And in 2000, raised to a higher level, Single PPM qualify Certification System has been established by the Small and Medium Business Adminstration. The quality target is below the 10ppm(parts per million) in outgoing qualify and delivered goods plus field claim. Recently 1.818 companies is received Single PPM Quality Certification from Government. Single PPM Quality Innovation movement is perfection movement which is suitable for 21C's social-economical criteria to pursuit of zero defect. The purpose of this study is to suggest the Kano Model based Global Sustainable duality Innovation(GSQI) Index to improve current problems of Single PPM Quality Innovation Movement.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.1
• /
• pp.52-58
• /
• 2013

Operation Abstract : Operational cost required for navigating a ship may differ from according to type, scale, economic speed, navigation area and other factors. However, it is known that the fuel oil price ratio takes 50~60 %. It is the current trend because of the use of poor quality fuel and it is reviewed even for small to medium sized ships to save the operational costs due to the recent rise of international oil price. Furthermore, ocean carriers are taking action to low speed navigation as the alternative method of reducing fuel consumption. Hence, in this study, fuel consumption of main engine was measured by using actual operating ship data compared with sea speed at sea. It was suggested that the area of M/E's load(70 %) lower than NCR is the optimal navigating condition through the relation between speed and fuel consumption compared with advance ratio together with the load.

• Food Science and Preservation
• /
• v.7 no.1
• /
• pp.12-18
• /
• 2000

As am economical and effective way of antimicrobial film fabrication , antimicrobial agents were coated on the LDPE film with a binder mediu. the fabricated films were then applied tomodified atmosphere packaging of fresh strawberries. A binder of polyamide was selected for the coating medium, based on the stability in water. 1% grapefruit seed extract-coated film showed the antimicrobial activity on the plate media against EScherichia coli, Staphylococcus aureus, bacillus subtilis , Bacillus cereus, Leuconostoc mesenteroides, Micrococcus flavus, Saccharomyces cerevisiae, while one with 10% Coptis chinesis extract inhibited only M. 림편 and one coated with 10% rheum palmatum extract did not inhibit any of 10 strains tested. The packages of fresh strawberries by using antimicrobial agents-coated films created the gas compositions of O2 1.4-5.5% and CO2 5.7-7.9%, and contributed to reduced growth of total aerobic bacteria and yeast/molds on the produced. However, their lower microbial count was not correlated directly with the reduced decay of the fruits.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.12
• /
• pp.2199-2201
• /
• 2008

Sulfur hexafluoride($SF_6$) is a gaseous dielectric used in high voltage electrical equipment such as an insultor or arc quenching medium in the transmission and distribution of electricity. however, $SF_6$ is one of the greenhouse gases(GHG) with a global warming potential that is 23,900 times greater than that of carbon dioxide($CO_2$). for this reason, $SF_6$ emissions in electric equipment shall be controlled to reduce GHG and improve cost-effective use of $SF_6$ for economical benefits. Until recently there has not been any investigation on $SF_6$ emission characteristics and inventory in Korea. To understand emission characteristics during the use-phase, the scope of this study was limited to the following closed pressure system equipment from 10 substations in Korea. This study highlights (1) the investigation of sampling/analysis methodology for $SF_6$ emissions in high voltage equipment, (2) the estimation of $SF_6$ emissions in the use-phase, and (3) the comparison between the emission ratio and the mass-balance applied to inventory study. According to this study, the majority of emissions were related to electric equipment nameplates and the rest of the emissions were related to the handling of $SF_6$ during operations. from this result, emission ratios estimated from this study were similar; GIS was 14% and GCB was 13%, as maintenance process conditions were the same as manual process conditions for both equipment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.6
• /
• pp.478-487
• /
• 2003

In this paper, a type and special feature of Multi-level inverter used in medium-voltage and high-capacity motor driver is introduced. Especially, a power quality and structural advantages of H-Bridge Multi-level inverter is described. It presented the specific structure of power circuit, design method, controller composition and PWM techniques of the cascaded H-Bridge Multi-level inverter which is developed. The feasibility of the developed product based on 3,300V lMVA 7-level H-bridge inverter was studied by experiments and we get conclusion that 1)generate of near-sinusoidal output voltage; 2)is low dv/dt at output voltage; 3)reduce the harmonic injection at input; Experiment demonstrate that it is very economical in productivity because of using the existing production technique and examination equipment, and has the reliability and a good maintenance due to the structure of Power Cell unit combination as well as low cost IGBT.