• Korean journal of applied entomology
• /
• v.47 no.4
• /
• pp.395-400
• /
• 2008

Economic injury levels (EILs) and economic threshold (ET) were estimated for the two spider mite, Tetranychus urticae Koch (Acari, Tetranychidae) on greenhouse eggplants. T. urticae density increased until the mid-July and thereafter decreased in all plots where initial density of the mite were different each 0, 2, 5, 10 and 20 adults per plant was innoculated on June 7. Growth variables of were not different among experimental plots but fruit weights were lower in plots with higher initial mite density than in plots with lower initial mite density. Total number of fruits and the number of marketable fruits decreased in plots with higher initial mite density. The rates of yield loss increased with increasing initial mite density, resulting in 0, 3.9, 11.3, 14.5, 22.8% reduction in each of the above plots, respectively. The relationship between initial T. urticae densities and yield losses was well described by a linear regression, Y = 1.085X + 2.474, $R^2$ = 0.9659. Based on the relationship, the number of adults per plant which can cause 5% loss of yield was estimated to be approximately 1.8.

• Korean journal of applied entomology
• /
• v.47 no.4
• /
• pp.407-411
• /
• 2008

This study was conducted to estimate the economic injury level (EIL) and economic threshold (ET) of the green peach aphid, Myzus persicae, on Chinese cabbage (Brassica campestris var). The changes of biomass of Chinese cabbage and M. persicae density were investigated after introduction of M. persicae at different density (0, 2, 5, 10, 15, and 20 per plant; inoculated at 10d after planting). The densities of M. persicae largely increased from the above initial densities to 0, 92.3, 177.4, 406.9, 440.4, and 471.3 aphids per plant at 18d after the initial inoculation, respectively. The biomass of Chinese cabbage significantly decreased with increasing the initial inoculated density of M. persicae: 602.0, 264.2, 262.0, 109.3, 151.0, and 67.3 g in above plots with different initial densities, respectively. The relationship between cumulative aphid days (CAD) and yield loss (%) of Chinese cabbage was well described by a nonlinear logistic equation. Using the estimated equation, EIL of M. persicae on Chinese cabbage was estimated 25 CAD per plant based on the yield loss 13%, which take into account of an empirical gain threshold 5% and marketable rate 92% of spring Chinese cabbage. Also, ET was calculated at 80% of EIL: 20 aphids per plant. Until a more elaborate EIL-model is developed, the present result may be useful for M. persicae management at early growth stage of Chinese cabbage.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.7
• /
• pp.606-611
• /
• 2009

AC loss is one of the important factors for commercialization of a high temperature superconducting (HTS) cable from an economic point of view. But AC loss characteristics of the HTS-cable are not elucidated completely because of its complex structure. As an earlier stage of analyzing the AC loss in the 22.9 kV/50 MVA, 100m HTS-cable system of Korea Electric Power Corporation (KEPCO) which is now in collaboration with us, a two-dimensional (2D) numerical model, which takes into account the nonlinear conductivity properties of a high temperature superconductor, has been developed. In order to examine our 2D model, we have prepared several single-layer cable samples whose AC losses are sufficiently reliable due to their simple structure. The AC losses of the samples were experimentally investigated and then compared with our 2D model. The results show that the numerically calculated AC losses are not in good agreement with the measured ones for the cylindrical cable and deca-cable samples with low critical current density. However, the numerically calculated and measured AC losses are relatively in good agreement for the deca-cable and hex-cable samples with high critical current density, although the difference between these two loss data in the deca-cable sample tends to increase in the low current region.

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.287-294
• /
• 2013

Purpose: Greenhouses for a protected horticulture covered with a plastic or glass are easy to have weakness in a heat loss by deterioration, damage, poor construction, and so on. To grasp the vulnerable points of heat loss of the greenhouses is important for heating energy saving. In this study, an on-site heat loss audit and energy consulting system were developed for an efficient energy usage of a greenhouse. Method: Developed system was mounted with infrared thermal and visual cameras to grasp the heat loss from the greenhouse quickly and exactly, and a trial calculation program of heating load of greenhouse to provide farmers with the information of heating energy usage. Results: Developed system could print out the reports about the locations and causes of the heat losses and improvement methods made up by an operator. The mounted trial calculation program could print out the information of the period heating load and fuel cost according to the conditions of greenhouse and cultivation. The program also mounted the databases of the information on the 13 horticultural energy saving technologies developed by the Korea Rural Development Administration and simple economic analysis sub-program to predict the payback period of the technologies. Conclusion: The developed system was expected to be used as the basic equipment for an instructors of district Agricultural Technology and Extension Centers to conduct the energy consulting service for the farmers within the jurisdiction.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.6
• /
• pp.145-154
• /
• 2013

Recently, damage occurrence by wind erosion has been increasing in society. In times past, such problems only took place in desert area ; however, in recent years, the wind erosion problem is spreading out to agricultural land. Wind erosion in agricultural land can cause loss of loam soils, the disturbance of the photosynthesis of the crop fields and serious economic losses. To overcome the mentioned problems, installation of windbreak fence can be recommended which function as disturbing strong wind and wind erosion. However, there is still no proper guideline to install the windbreak fence and the installation used to rely on the intuition of the workers due to the lack of related studies. Therefore, this study measured the aerodynamic resistance of screens of the windbreak fence using the apparatus for testing screens. The apparatus for testing screens was designed to measure pressure loss around the screen. Measured pressure loss by wall friction compensated for pressure loss to calculate the aerodynamic resistance of screens. The result of pressure loss by regression analysis derived the aerodynamic coefficient of Darcy-Forchheimer equation and power law equation. The aerodynamic resistance was constant regardless of the overlapped shape when the screen was overlapped into several layers. Increasing the number of layers of the screen, internal resistance increased significantly more, and pressure loss caused by the screen also increased linearly when the wind speed was certain conditions, but permeability had no tendency. In the future, the results of this study will be applied to the computational fluid dynamics simulation. The simulation models will be also validated in advance by wind tunnel experiments. It will provide standard of a design for constructing windbreak fence.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.355-362
• /
• 2016

The pipe material is selected according to the physical and chemical properties of the fluid flowing within it. Because the fluid used in fire extinguish systems is water, the various foreign substances dissolved in it cause scale to form on the pipe wall and accelerate the corrosion and aging of the pipe itself. This results in an increase in the friction loss and eventually degrades the efficiency of the pump. The use of CPVC (Chlorinated Poly-Vinyl Chloride) pipes was confirmed to reduce the friction loss compared to conventional steel pipes in the design and construction stages. The friction loss was found to be 76.64MPa with a C-value of 120 for the steel pipe and 50.72 MPa with a C-value of 150 for the CPVC pipe in an actual apartment construction environment. It was confirmed that the friction loss was improved by about 34% when using the CPVC pipe. When the steel and CPVC pipes were employed in the construction, the construction costs were 1,585,158 and 931,842 won, respectively. Therefore, it was shown that the construction cost was reduced by about 41%. We investigated the safety of the fire extinguishing system and the improvement in the economic performance due to the reduction in the total installed capacity by studying practical applications in the field.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1993.10a
• /
• pp.31-39
• /
• 1993

This paper considers a procedure for the economic design of a cumulative score(CUSCORE) control chart and more sensitive than X-type control chart for small shift to control the mean of a process with a exponentially distributed quality characteristic. An expected loss - cost model as a function of design variables(sample size, sampling interval, scoring limit and decision limit) is derived. Direct search techniques are used to optimize the model subject to ARL in control. Numerical examples and sensitivity analysis of the model are presented. For selected values of situation parameters a comparison study with CUSUM charts is given. CUSCORE control charts compare favourably with CUSUM charts in cost for speedy production process. The proposed control chart can be directly applied for controlling the lifetime characteristics.

• East Asian Economic Review
• /
• v.21 no.2
• /
• pp.103-121
• /
• 2017

This paper experimentally studies the performance of negotiation considering individual and party, like a country, share of benefit over the best ones. It experiments two-stage bargaining games, internal and external negotiations. From the experimental results, this paper shows strong tendency to select fair allocation in the internal negotiations, but the tendency would be weaker with attractive outside option. In addition, the outside option may claim difference in individual benefit. From the regressions on individual performance in the negotiations, being a proposing party would matter to enhance the performance. However, relative individual performance within party fairness matters. Still attractive no-agreement options happen to break the tendency. As policy implication for trade negotiation, this paper warns that possible loss in individual benefit from not active participation to the external negotiations, no active role of proposer in case that players stick to internal allocations, and deviation of advantageous sector due to attractive outside options.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05b
• /
• pp.133-136
• /
• 2011

This study concerned with the steel beam of bonding method and bonded steel beams by this method and both ends of different height, steel beams and steel beams in the center makes the junction. Both ends and the central part of steel beams connecting the lower flange by additional combining steel plates to convey stress, the stress to focus on the beam connections are passed to both ends of steel beams, and strength of beam connections is improved and steel structural beams is proposed to minimize the loss by Incision. If you use the developed method, the construction period is shortened, and reducing the amount of material can decrease the cost and reduction in floor height can be maximized business feasibility.

• Journal of the Korean Data and Information Science Society
• /
• v.16 no.4
• /
• pp.943-949
• /
• 2005

An economic design of specification limits for production process of ham is considered for a given process mean in a complete inspection plan. Each ham is inspected, and if it meets the specification, it is accepted. The ham less than the lower specification limit are changed another products or at a discounted price, and those greater than the upper specification limit are reworked. A profit model is developed which involves selling price, production cost, rework cost and the cost which is incurred by imperfect quality. Methods for finding the optimal specification limits are derived for the case of piecewise linear loss function with an industrial case study.