• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.8
• /
• pp.177-184
• /
• 2019

Recently, electric power usages and peak loads from buildings are increasing due to higher outdoor air temperatures and/or abnormal climate during the summer period. As one of the eco-friendly measures, a renewable energy system has been received much attention. Particularly, interest on a photovoltaic (PV) system using solar energy has been rapidly increasing in a building sector due to its broad applicability. In using the PV system, one of important factors is the PV efficiency. The normal PV efficiency is determined based on the STC(Standard Test Condition) and the NOCT(Nominal Operating Cell Temperature) performance test. However, the actual PV efficiency is affected by the temperature change at the module surface. Especially, higher module temperatures generally reduce the PV efficiency, and it leads to less power generation from the PV system. Therefore, the analysis of the relation between the module temperature and PV efficiency is required to evaluate the PV performance during the summer period. This study investigates existing algorithms for calculating module surface temperatures and analyzes resultant errors with the algorithms by comparing the measured module temperatures.

• Clean Technology
• /
• v.28 no.1
• /
• pp.32-37
• /
• 2022

Food waste is produced from food factories, food services, and home kitchens. The generated mass reached 5.4 million tons/year in 2020. The basic management technology for such waste has been biological degradation under an anaerobic environment. However, the whole process is intrinsically slow and considerably affected by the inner physicochemical properties of the waste and other surrounding conditions, which makes optimization of the process difficult. The most promising options to counter this massive generation of waste are eco-friendly treatments or recycling. As a preliminary step for these options, attempts were made to evaluate the feasibility and usability of three simulative models based on reaction kinetics. Model (A) predicted relative changes over reaction time for reactant, intermediate, and product. Overall, an increased reaction rate produced less intermediate and more product, thereby leading to a shorter total reaction time. Particle diminishing model (B) predicted reduction of the total waste mass. The smaller particles diminished faster along with the dominant effect of microbial reaction. In Model (C), long-chain cellulose was predicted to transform into reducing sugar. At a standard condition, 48% of cellulose molecules having 10⁵ repeating units turned into reducing sugar after 100 h. Also it was found that the optimal enzyme concentration where the highest amount of remnant sugar was harvested was 1 mg L^-1.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.6
• /
• pp.581-593
• /
• 2022

As energy depletion and environmental pollution problems are intensified, research has been conducted actively on alternative energy sources, an eco-friendly and continuous available energy conversion system. So has been organic solar cells whose efficiency is improved to 18.32%. The photoactive layer inside the solar cell is composed of a donor and a acceptor, and the combination of materials capable of effectively exchanging electrons greatly affects the efficiency of the organic solar cell. Accordingly, various researches have been conducted to improve the efficiency, and the maximum efficiency could be achieved by a solar cell with high carrier generation and low charge recombination characteristics through the introduction of a non-fullerene acceptor and material reconstruction. Organic solar cells are still difficult to commercialize due to their efficiency limitations and light stability, but if a photoactive layer consisting of a donor capable of efficiently absorbing long-wavelength light and an acceptor capable of forming an appropriate energy level is designed, the efficiency of the organic solar cell will reach 20%.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.21 no.1
• /
• pp.9-22
• /
• 2023

Spin-off pyroprocessing technology and inert anode materials to replace the conventional carbon-based smelting process for critical materials were introduced. Efforts to select inert anode materials through numerical analysis and selected experimental results were devised for the high-throughput reduction of oxide feedstocks. The electrochemical properties of the inert anode material were evaluated, and stable electrolysis behavior and CaCu generation were observed during molten salt recycling. Thereafter, CuTi was prepared by reacting rutile (TiO₂) with CaCu in a Ti crucible. The formation of CuTi was confirmed when the concentration of CaO in the molten salt was controlled at 7.5mol%. A laboratory-scale electrorefining study was conducted using CuTi(Zr, Hf) alloys as the anodes, with a Ti electrodeposit conforming to the ASTM B299 standard recovered using a pilot-scale electrorefining device.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_2
• /
• pp.639-648
• /
• 2023

In modern society, UAM (Urban Air Mobility) transportation system is being developed as an alternative to urban traffic congestion and environmental problems, and electric vertical take-off and landing (eVTOL) is a combination of vertical take-off and landing function and electric power. It is attracting attention as an innovative next-generation transportation method as an eco-friendly alternative that reduces noise and air pollution by providing efficient mobility within the city. Since eVTOL development requires designing and implementing airframes suitable for various mission purposes, the power system needs to be developed as a platform concept before airframe development. In this study, we empirically proposed a test bench concept equipped with a stable power supply and an efficient control system, essential in developing a power platform with a combined function in the form of a fuselage and module type specialized for various mission purposes. The proposed drivetrain platform test bench consists of a system verifying the stable take-off and landing software and a power platform adjusting the motor's thrust. It will serve as a verification system that can be developed.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.65 no.3
• /
• pp.1-13
• /
• 2023

Local governments play a critical role in achieving carbon neutrality and reducing national carbon emissions. To manage carbon emissions effectively, it is essential for local governments to analyze regional carbon emissions. In this study, we developed a model for estimating carbon emissions based on land use and analyzed regional characteristics of carbon emissions to suggest policies for achieving carbon neutrality at the regional level. Our model for calculating carbon emissions is based on an analysis of the activities that contribute to carbon emissions for each land use, and we established the spatial scope of carbon emission calculation. We applied this model to the cities and counties in Gyeongsangnam province, calculating carbon emissions from settlement and agricultural production activities and comparing regional characteristics of carbon emissions. Our analysis showed that areas with larger populations generally produced higher emissions in all categories, but we observed different results in terms of unit emissions, emissions divided by area, population, and household. Based on these findings, we propose policies such as increasing the generation of new and renewable energy using public institutions, promoting the conversion to cleaner cooking and heating energy sources, and encouraging the adoption of eco-friendly automobiles on roads. We believe that our analysis of the spatial and regional characteristics of carbon emissions can help local governments establish effective policies for reducing carbon emissions in their regions.

• Communications for Statistical Applications and Methods
• /
• v.29 no.6
• /
• pp.709-719
• /
• 2022

Recently, as the importance of environmental protection has emerged, interest in new and renewable energy is also increasing worldwide. In particular, the solar energy sector accounts for the highest production rate among new and renewable energy in Korea due to its infinite resources, easy installation and maintenance, and eco-friendly characteristics such as low noise emission levels and less pollutants during power generation. However, although climate prediction is essential since solar power is affected by weather and climate change, solar radiation, which is closely related to solar power, is not currently forecasted by the Korea Meteorological Administration. Solar radiation prediction can be the basis for establishing a reasonable new and renewable energy operation plan, and it is very important because it can be used not only in solar power but also in other fields such as power consumption prediction. Therefore, this study was conducted for the purpose of improving the accuracy of solar radiation. Solar radiation was predicted by a total of three weather variables, temperature, humidity, and cloudiness, and solar radiation outside the atmosphere, and the results were compared using various models. The CatBoost model was best obtained by fitting and comparing the Boosting series (XGB, CatBoost) and RNN series (Simple RNN, LSTM, GRU) models. In addition, the results were further improved through Time series cross-validation.

• Membrane Journal
• /
• v.33 no.1
• /
• pp.46-51
• /
• 2023

The purpose of this study is to analyze the utilization forms of hydrogen fuel cells, which are the core of building a smart city, and suggest ways to solve them. In the case of power plants to utilize hydrogen fuel cell, it was analyzed as the most promising form of use in the future due to the advantage of being free from intermittence problems. However, despite many advantages, local residents' opposition continues to emerge due to concerns about explosions and the problem of carbon dioxide generation in the case of certain hydrogen production methods, and it is analyzed that resolving them will be the main key to establishing the smart city. Finally, by analyzing the current hydrogen production method and identifying the problems facing it, the solution for the complete construction of the smart city was presented.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.4
• /
• pp.418-426
• /
• 2023

This study focused on nitrous oxide, a major greenhouse gas produced in agricultural settings through bacterial nitrogen oxidation in aerobic soil. Nitrogen fertilizer in farmland is identified as a primary source of nitrous oxide. The importance of reducing excess nitrogen in soil to mitigate nitrous oxide production is well-known. The study investigated the use of liquefied pig manure as an alternative to urea fertilizer in conventional agriculture. Results showed a more than two-fold reduction in nitrous oxide emissions in pepper cultivation areas with liquefied pig manure compared to that with urea fertilizer. The population of Nitrosospira, a nitrous oxide-producing bacterium, decreased by over 10% with liquefied pig manure. Additionally, nirK and nosZ, which are related to the denitrification process, significantly increased in the urea fertilizer group, whereas levels in the liquefied pig manure group resembled those with no nitrogen treatment. In conclusion, the experiment confirmed that liquefied pig manure can serve as an eco-friendly nitrogen fertilizer, significantly reducing nitrous oxide production, a major contributor to the atmospheric greenhouse effect.

• Corrosion Science and Technology
• /
• v.23 no.2
• /
• pp.139-144
• /
• 2024

Recently, due to the rapid spread and continuation of COVID-19, customer demand for health and hygiene has increased, requiring the development of new products that express antiviral and antibacterial properties. In particular, viruses are much smaller in size than bacteria and have a fast propagation speed, making it difficult to kill. POSCO has developed eco-friendly PCM color coated steel sheets with excellent antiviral properties by introducing inorganic composite materials to the color coating layer on the surface of Zn-Al-Mg alloy plated steels. The virus is not only destroyed by adsorption of metal ions released from the surface of the coating film, but is also further promoted by the generation of reactive oxygen species by the reaction of metal ions and moisture. As a result of evaluating the developed products under the International Standard Evaluation Act, the microbicidal activity was 99.9% for viruses, and 99.99% for bacteria and 0% fungi. In particular, excellent results were also shown in the durability evaluation for life cycle of the product. The developed product was applied as a wall of school classrooms and toilets and ducts for building air conditioning, resulting in excellent results. Developed products are being applied for construction and home appliances to practice POSCO's corporate citizenship.