• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.99-105
• /
• 2007

In clinical practice, air bubbles trapped in the pit and fissure may increase early loss of sealing materials for fracture, wear and microleakage. The purpose of this investigation was to examine the bubble behavior of pit and fissure sealant. The 140 replicas made of epoxy resin were used to this experiment. Following conditioning, light-polymerized sealants were applied and then exposed to the light source. After stereoscopic examination of standarized specimen by grinding, bubble behavior was analysed. The results obtained were as follows; 1. Ultraseal $XT^{(R)}$ plus grops irrespective of using time were higher than groups of $Helioseal^{(R)}$ with clinpro tip and metal tip in the frequency of bubble(p<0.05), 2. Ultraseal $XT^{(R)}$ plus old group was more than $Clinpro^{(R)}$, Teethmate $F-l^{(R)}$ and $Helioseal^{(R)}$ with brush tip in the number of bubble under 200 magnified cross section(p<0.05). 3. The widest mean area of bubble was shown in the Teethmate $F-1^{(R)}$. 4. No statistically significant difference of the frequency and the site of bubble between $Clinpro^{(R)}$ and $Helioseal^{(R)}$ groups(p>0.05).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.3
• /
• pp.272-279
• /
• 2013

The concept of implant stability was basically originated from the relative condition of bone-implant interface and has some meanings for evaluation of that interface. In addtion, it has been used for the investigation of initial bone healing process after fixture installation because a degree of micromotion around interface can affect unfavorable clinical results. The purpose of this study is to investigate the mode of initial bone healing from fixture installation through prospective trial. Thirty fixtures were consecutively installed in mandibles of 26 patients with single tooth loss area and then healing abutment were secured for one-stage surgery meothod. Resonance frequency analysis was performed with one week interval during 12 weeks and periapical radiographs were taken at each month. Although marginal bone level change was not shown through observation period (P>0.05), statistical difference of implant stability was shown through 4 and 6 week (P<0.05) and was not shown after 6 week (P>0.05) according to the bone quality. Initial bone healing process is a successive process of bone resorption and favorable bone healing result might be postulated at 4 week interval after installation through RFA.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.112-121
• /
• 2015

In this study, Copper Azole (CuAz), a domestically available wood preservative for pressure treatment, was employed to perform an experimental research on its infiltration and decay properties in Japanese Red Pine. Test specimens were pressure-injected with CuAz-2 preservative to measure its preservative effectiveness, and then its impact on weight and mass losses. Furthermore, wood specimens were treated with CuAz-2 preservatives of various concentration levels before they were decayed with brown-rot-fungi in order to observe decay properties on light microscope (LM) and field emission scanning electron microscope (FE-SEM). As a result, untreated specimen by Fomitopsis palustris showed the mass loss of more than 40%, and the value of preservative effectiveness of CuAz-2 by indoor decay was $1,73-3.32kg/m^3$. The concentration levels of CuAz-2 preservative were shown to cause significant variations in terms of decay progresses in the cross section, radial section, and tangential section. By contrast, untreated specimens had underwent serious decays in early wood, late wood, longitudinal resin canals, and ray, which led to vertical destruction of wood texture. As for the radial section, ray tracheid, ray parenchyma cell, and window like pits were decayed and destroyed. In the case of tangential section, uniseriate rays and vertical resin canals were seriously decayed. In conclusion, this study indicates that the adequacy of the current CuAz injection amount should be reviewed in the domestic environment because there are significantly different decays at different decay conditions.

• Journal of Distribution Science
• /
• v.12 no.6
• /
• pp.59-65
• /
• 2014

Purpose - The competitiveness of logistics in the 21st century rests on ensuring the efficiency and effectiveness of its local hub. While considering entry into a niche market in local logistics, it is pertinent to note that Budapest is emerging as a hub in EU enlargement in Eastern Europe. Big, small, and medium-sized businesses in Korea entered Hungary in the early 1990s since then, there has been a significant increase in Korean presence, of approximately 130 times. This study aimed to identify the key distribution issues that have emerged in relation to Eastern Europe. Research design, data, and methodology - This study indicates that 33 major Korean companies were located in Hungary, which serves as an out post to enter the European marketplace. However, Korea's exports to Hungary have declined (-32.0% in 2012) because of a loss of competitiveness against multinational corporations, due to factors such as the rise in current local distribution costs and wages. Hungary, on the other hand, through diversification and expansion of foreign trade with the non-EU markets, including Korea, is increasing its exports. Strategies of emerging countries are compared and reviewed in this study, by examining the vicissitudes of Hungary's distribution methods. Results - There are issues regarding Hungary's innovative ability. Hungary has a history of low wages and high skilled labor. However, the outflow of high-quality human resources for high-wages has become more extensive, and this underlines concerns that the CEE's trade hub is moving to neighboring countries. After the European financial crisis in 2010, the Hungarian economy is now developing, because of the IMF's measures, and it is being transformed into a trade surplus nation, while regaining distribution volumes rapidly. However, if there is continued lack of investment, the supply chain is weakened and exports decline amidst competition with TNCs or with China's distribution networks. Conclusions - It is necessary to create a new logistics approach for increasing trade between Korea and Hungary. First, Korean small and medium enterprises (SMEs) should build trust by working with advanced Hungarian talent, and they should expand into state-of-the-art fields instead of being confined to traditional sectors. Second, this study focuses on limiting and lowering their high expectations for success according to foreign direct investment (FDI) inflows and the role in the CEE distribution hub Korea should try to strengthen the distribution hub with its centralized population, using better, more highly educated human resources, thereby sustaining more innovative ability. Further, the positive effects of these measures are manifested in enhanced business on both sides of Hungary, namely, the EU and non-EU nations such as Turkey and emerging markets around Europe, and a better engagement in the core placement of culture and industry. For this, Korea can contribute to, and benefit from, a Hungarian logistics center, for adopting the high-tech cluster systems and commercializing distribution technology such as RFID·USN.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.6 no.1
• /
• pp.1-8
• /
• 1977

The sample persimmons were obtained from the of Yung-am Kun, Korea on October 24, and November 9, 1973. These persimmons were kept at room temperature overnight, then packed and stored on the following day at $0^{\circ}C$ and $85{\sim}100%$ humidity. Seven experimental items were studied : 1. control, 2. packing with excelsior in wooden boxes, 3. packing with rice hull in wooden boxes, 4. packing in bags of 0.03 mm polyethylene membrane, 5. packing in bags of 0.06 mm polyethylene membrane, 6. packing in bags of 0.08 mm polyethylene membrane, 7. packing in sealed desiccators. The dimension of polyethylene bags were $14{\times}28cm$ and three persimmons were packing in each bag. The results are as follows: 1. The persimmons both in polyethylene bags and in desiccators lost only 1 % or less of weight, while in control (1) packing with excelsior (2) or with rice hull (3) the loss was 6-7 % in weight after $2{\sim}3$ months. The persimmons became visibly shriveled and spongy-like in it's texture when it lost 5 % of weight. 2. Carbon dioxide content within the polyethylene bags and desiccators rapidly increased during the early storage period, and reached 5 % (in 0.03 mm polyethylene bags) to 50 % or more (in desiccator) after 1 month. In the polyethylene bags of 0.08 mm and desiccator, the carbon dioxide accumulated to a dangerous level and the persimmon showed physiological damage in a longer storage period. 3. The advance of after-ripening and deterioration of persimmon sealed in the polyethylene bags was slower than that in open bags when moved out to room temperature from the chilling and the polyethylene bags of 0.06 mm retarded the after-ripening most effectively. 4. On the basis of these results, a temperature of $0^{\circ}C$, relative humidity of almost $85{\sim}100%$ and combinations of 5 % oxygen and $5{\sim}8%$ carbon dioxide seem to be the optimum condition for the storage of persimmon (Teabong-Si). The most successful method of storing was to pack them in polyethylene bags of 0.06 mm and then to store them at $0^{\circ}C$.

• Journal of Gastric Cancer
• /
• v.1 no.2
• /
• pp.92-99
• /
• 2001

Purpose: E-cadherin is an adhesion molecule essential for tight connection between cells, forming the cadherin/catenin complex. Truncated $\beta$-catenin disrupts the interaction between E-cadherin and $\alpha$-catenin, leading to the loss of intercellular adhesion. Met protein, the hepatocyte growth factor receptor, plays important roles in signal transduction. We investigated the relationships between the expressions of E-cadherin, $\beta$-catenin, and c-met protein and the clinicopathological and prognostic parameters in gastric adenocarcinomas. Materials and Methods: The patterns of E-cadherin, $\beta$-catenin, and c-met protein expression were studied using immunohistochemistry in formalin-fixed, paraffin-embedded archival tissues from 76 surgically resected gastric adenocarcinomas. Results: Increased expressions of E-cadherin, $\beta$-catenin, and c-met were more significantly correlated in early gastric cancers (EGC) than in advanced gastric cancers (AGC) (P=0.002, P=0.003 and P=0.026). The positive immunoreactivities of all three markers were markedly lower in signet ring-cell type and poorly differentiated type lesions than in intestinal-type lesions. Decreased expression of the $\beta$-catenin protein correlated well with increased tumor invasion depth (P=0.039), and increased lymph node metastasis correlated well with reduced expression of c-met (P=0.046). Conclusion: In gastric cancers, reduced expressions of the E-cadherin, $\beta$-catenin, and c-met proteins may play some role in poorer tumor differentiation, deeper tumor invasion, and increased lymph node metastasis. Also, the c-met gene is thought to play a specific role in the mechanism of the yet unknown catenin action.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.3
• /
• pp.253-261
• /
• 2015

Chronic periodontitis involves subsequent loss of teeth, and if left untreated, can lead to adjacent teeth drifting and supraeruption of the rest dentition. Careful consideration has to be given when deciding extraction of remaining teeth in treatment of periodontally compromised dentitions. For tooth-supported fixed partial dentures or removable partial dentures, periodontally compromised teeth are extracted due to possible early failure from functional overload, but for implant restoration, the teeth could be used as supports for fixed partial dentures because implants can reduce overload on teeth. The remaining natural teeth can help clinicians restoring vertical dimension and normal occlusal plane in full mouth rehabilitation because it conserves patients' proprioceptive response. This clinical report describes treatment of a patient who has a few remaining teeth and supraeruption of the rest dentition from severe chronic periodontitis. Satisfactory clinical result was achieved with full mouth rehabilitation using a few teeth and implants.

• Archives of Craniofacial Surgery
• /
• v.13 no.1
• /
• pp.68-71
• /
• 2012

Purpose: Eczema herpeticum, caused by herpes simplex virus, is an infectious disease involving skin and internal organs. Varieties of physiologic, psychosocial, or environmental stress reactivate reservoir virus which exists in the trigeminal nerve ganglia. Authors report rare cases of nasal eczema herpeticum following corrective rhinoplasty. Methods: First case, 22-year-old female underwent corrective rhioplasty through an external approach in a local clinic. She developed progressive and painful erythema, nodules and vesicles on nose on the 9th day postoperatively. This unfamiliar lesion lead to a misdiagnosis as a bacterial infection, and had accelerated its progress to the trigeminal innervation of the nasal unit. Second case, a 23-year-old female underwent corrective rhinoplasty by external lateral osteotomy. Ten days after the surgery, disruption occurred on the external osteotomy site, and the ulceration gradually worsened. The surgeon misdiagnosed it as secondary bacterial infection and only an antibacterial agent was applied. Results: Both cases were healed effectively without any complication with proper wound dressing and antiviral therapy, and show no sequelae during an 8-month follow-up period. Conclusion: Eczema herpeticum is rare in the field of plastic surgery, but it should be kept in mind that secondary bacterial infections may lead to serious complications such as full-thickness skin loss. Thus, acknowledgement of the patient's past history regarding perioral or intraoral lesion may provide the surgeon with the possible expectancy of eczema herpeticum. Thus, if anyone develops eczema herpeticum, following facial plastic surgery, early diagnosis and immediate proper antiviral therapy will allow fast recovery without serious complications.

• Korean journal of applied entomology
• /
• v.47 no.2
• /
• pp.149-154
• /
• 2008

Pyrausta panopealis is the major pest in green perilla. The larva weaves a web on the shoot of green perilla and damages. In case of extreme, The larva cuts the main branch of green perilla and the leaf of green perilla isn't harvested anymore. A field study was conducted to estimate economic injury levels (EILs) and control thresholds (CTs) for P. panopealis injuring green perilla in green-houses. Different densities of P. panopealis ranged from 1 to 20 crops (2 units per crop) per 100 crops on 13. June, early inoculation. The number of injured leaf and the rate of injured crop were increased by 23. June, on the other hand were decreased after that day. Also, the amount of yield sow the same result above. The economic loss time calculated by the ratio of cost managing this moth to market price (C/V) (C: cost managing a moth, V: Market price) was 4.0%. The economic injury level was 5.1 larval per 100 crops. The control thresholds calculated by 80% level of economic injury level was 4.1 larval per 100 crops.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.203-210
• /
• 2007

This paper treats optimal route safety assessment system at seaway based on weather forecasting data through INMARSAT. Since early times, captain have been sailing to select the optimum route considering the weather, ship loading status condition and operational scheduling empirically. However, it is rare to find digitalized onboard route support system whereas weather facsimile or wave and swell chart are utilized for the officer, based on captain's experience. In this paper, optimal route safety assessment system which is composed of voyage efficiency and safety component is introduced. Optimum route minimized ETA(estimated time of arrival) and fuel consumption that shipping company. and captain are requiring to evaluate for efficient voyage considering speed loss and power increase based on wave added resistance of ship. In the view point of safety, seakeeping prediction is performed based on 3 dimensional panel method Basically, the weather forecast is assumed to be prepared previously in order to operate this system.