• Journal of the Korean Geosynthetics Society
• /
• v.17 no.1
• /
• pp.21-31
• /
• 2018

This paper analyzes the displacements of CFRD which was completed by field measurement. It is to understand the deformation behavior of the dam body according to the water level change from the impounding time. And it was compared with numerical analysis results. As a result of measuring the behavior of the dam crest and downstream slope according to impounding, horizontal displacements in axis direction of the dam, upstream and downstream displacements and settlements occurred mostly when the water level reaches about half of the dam height. The displacements continued until the water level reached its maximum. After that, it showed a constant convergence regardless of the water level. Horizontal displacements of the face slab which is the most important in CFRD were similar at all locations. The Horizontal displacements of the face slab showed the trends of increasing in winter and decreasing in summer due to the effect of the outside temperature before impounding. Also, the displacements increased until the water level reached about half of the dam height. After that, they decreased with rising in water level. As a result, the face slab behaviors according to seasonal change after impounding as well as water level condition. It is judged because of the material characteristics of the concrete slab. Numerical analysis showed slightly different maximum settlement and depth of occurrence from the measuring data after construction of the dam. It is considered that this is due to various design and construction differences such as the estimation of input parameters in analysis, construction period, and the layer thickness of construction. For the overall period of the dam, the settlements were mostly completed during the construction period and some settlements occurred in the early days of impounding and then converged.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.95-103
• /
• 2012

Precast concrete method is known to have advantages of minimizing works in the construction, controlling concrete quality easily and saving construction period due to only fabrication work in the construction field, but it needs to apply steam curing to accelerate early concrete strength. In the meanwhile, the oil cost for steam curing has been continuously increased because of political instability in the middle East and international economic shaky. Thus, this study addresses the development of precast/ prestressed concrete which has over 14MPa at 1 day age and specified concrete strength of 40MPa at low temperature, not applying steam curing. Tests were carried out in terms of material characteristics in fresh concrete and compressive strength using 3 types of cement such as Type I, Type III and rapid hardening compound cement. As results of tests, it is found that cements for rapid hardening had disadvantages with respect to slump, slump loss, and air content, but showed higher compressive strength than specified one, especially the highest value when using rapid hardening compound.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.446-452
• /
• 1999

Ectopic eruption of the first permanent molar means the first permanent molar assumes an atypical path of eruption resulting in premature atypical resorption of the second primary molar. If the reversible eruption does not occur, early loss of the second primary molars results in space loss, mesial tipping of the first permanent molar, impaction of the second premolar, buccal segment crowding and overeruption of opposing tooth. The main objectives of treatment are (1) to prevent loss of the second deciduous molars so it can continue to serve as a space maintainer and (2) to regain lost arch length, allowing the second premolar to erupt into normal position. The optimal treatment approach depends on a number of factors including the clinical eruption status of /6/, the change in position of /6/, the amount of enamel ledge of /E/ entrapping /6/, the mobility of /E/, and the presence of pain or infection. Unilateral appliance to correct the mesial angulation of ectopic permanent first molars, as in the majority of the appliance designs, would produce a resultant force that would further enhance the space loss. A bilateral support similar to the holding arch design is recommended to maximize the anchorage. These case reports present the successful result of preserving space for the second premolar in treatment of ectopic eruption of the first permanent molar using Halterman appliance with bilateral anchorage on patients visiting department of pediatric dentistry in Samsung Medical Center.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.101-110
• /
• 2013

$T4K^{TM}$(Myofunctional Research Co, Australia) is one of the myofunctional appliance developed to be used in children of mixed dentition. Myofuncitonal appliance stimulate the facial, masticatory and tongue muscle and help to balance the muscular force. Labial bow included in the device exerts strength in excessively labial inclineded upper jaw, Lip bumper blocks strength of the mouth to prevent abnormal strength exerted in lower jaw, Tongue tag secures proper position of tongue, and additional exercise is not required for child patients. For the more, simpler design and softer texture of device prmoted cooperation of patients during use. This case report is to present the satisfactory results gained by using $T4K^{TM}$ on Class II patients. Comment 1. $T4K^{TM}$ was applied in Class II malocclusion patients of mixed dentition with expected space insufficient to gain facial improvement. 2. Excessive overjet, overbite were improved. 3. Main effects are regarded to have been achieved by development of lingual slant of upper jaw, labial slant of lower jaw, and lower part of jawbone. 4. Bad habits, such as mouth breathing, can also be adjusted.

• Journal of the Korean Society of Costume
• /
• v.56 no.1 s.100
• /
• pp.1-12
• /
• 2006

The purpose of this study is to comprehend the color and the coloration of Han-bok on the oil-painting of modern Korea. Generally, the modern Korean art is from late 19th to early 1980s' for the lowest year. Through the introduction of oil painting and the painter's work which had been reflected painter's realism at these times, we might know that the phases of the times and we could see a Korean costume and color combination. In this study, Han-bok is divided to upper clothes, lower clothes and the other parts which was distinguished by the color. The color of Han-bok which is watched on the modern art oil-painting is mainly white. The primary color including red, yellow, blue and middle tone colors is in harmony. It means that the five colors of Yin-Yang Wu-hsing were preferred until the modern times. The coloration of Han-bok is classified to a one-colored arrangement, two-colored arrangement and three-colored arrangement. The one-colored arrangement by white and black is a peculiar coloration to the modern times. The two-colored arrangement is a traditional coloration of Han-bok. The color which is high value and chroma is arranged on jacket, Jeogori. A dimension rate that is related with the difference of value and chroma made a visual harmony. In many cases of the two-colored arrangement of neutral colors is not much different in Jeogori and Chima. So Han-bok which is two-colored arrangement of neutral colors is colored in a breast- tie, pigtail ribbon, cuff and waist band for getting visual focus. The represented three-colored arrangement is white Jeogori and navy blue Chima with red breast-tie. It is a perfect visual color combination. The color of Han-bok was inherited a traditional color and the combination of neutral color was balanced. It was a refinable coloration system according to a difference of value and chroma. It means that a color sensation and arrangement of Korean have been developed by our unique climate, nations and the culture which has been formed for a long times.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.5
• /
• pp.527-534
• /
• 2020

A significant factor in construction work is cost. At early- and advanced-stage design, costs should be calculated to derive realistic cost estimates according to unit price calculation. Based on these estimates, the economic feasibility of construction work is assessed, and whether to proceed is determined. Through the Korea Institute of Civil Engineering and Building Technology, the construction cost index has been calculated by indirect methods after both the producer price index and construction market labor have been reprocessed to easily adjust the price changes of construction costs in Korea, and the Institute has announced it since 2004. As of January 2000, however, the construction cost index was released, and this has a time constraint on the correction and use of past construction cost data to the present moment. Variables were calculated to compute a rough construction cost that utilized past construction costs through surveys of the producer price index and the construction market labor force consisting of the construction cost index. After significant independent variables among the many variables were selected through correlation analysis, the construction cost index from 1970 to 1999 was calculated and presented through multiple regression analysis. This study therefore has prominent significance in terms of proposing a method of calculating rough construction costs that utilize construction costs that pre-date the 2000s.

• Ecology and Resilient Infrastructure
• /
• v.3 no.3
• /
• pp.177-181
• /
• 2016

In order to prevent the fragmentation of animal habitat due to road construction, the most widely applied solution is building animal passes worldwide. In Korea, animal passes were introduced in the early 2000s, and through trial and error, the national guidelines for them and their design standards were published in 2010. These were criticized by politicians because of their relative inefficiency considering their high construction cost and their lack of animal usage. This study investigated the extent to which animals used the facilities. For this study, two types of animal passes, eco-bridges and ecoducts, were considered and the test sites were chosen from the Baekdu Mountains. The animal usage data was captured using infra-red CCTV cameras. The results showed that various types of animals used eco-bridges and ecoducts. Interestingly various types of birds were captured by cameras and endangered animals were also in them. The season, weather, and their surrounded vegetation also had effects on their usages. The infrared CCTV allowed detailed captures of animals but the electricity shortage was one disadvantage. During the last decades, a number of eco-bridges were constructed throughout the country and now we need to focus on their monitoring and maintenance for their successful efficiency and application.

• Journal of Animal Environmental Science
• /
• v.12 no.2
• /
• pp.51-60
• /
• 2006

Studies were carried out using growing to finishing pigs to investigate adequate floor space ($m^2/pig$) in Jeju environment. A randomized block design was used to compare the effect of pig performance on 3 stocking rates (low $0.56 m^2/pig$, medium 0.70 and high 0.90). Liveweight gain and feed intake were measured over a 4 week(Growth stage 1 and Growth stage 2) period or a 3 week(Growth stage 3) period. In growth stage 1 (43 to 65 kg body weight ; BW), daily weight gain was significantly higher in the medium stocking rate than in low or high (P<0.05). However, no significant difference in daily weight gain was found among treatments in growth stage 2(65 to 91 kg) or 3 (91 to 105 kg). Dressing percentage, back fat thickness and carcass grade were also not different (P>0.05). In conclusion, daily weight gain of pigs reared in medium density appeared to be higher than in the other groups during the early growing period which is $0.70m^2/pig$ and similar to that recommended by National Livestock Research Institute, RDA.

• Archives of Plastic Surgery
• /
• v.37 no.5
• /
• pp.695-698
• /
• 2010

Purpose: Supernumerary nipple or polythelia is one of the developmental anomalies occurring at the embryonic stage and this anomaly usually arises from the milk line. While this atypical feature is determined during early developmental stage, it may not come out obviously or become troublesome until puberty or lactation. Moreover, sometimes it is confused with a pigmented nevus. Methods: Case 1, a 18-year-old woman with intramammary supernumerary breast consisted of another nipple with middle sized areola on the right lower breast was admitted for a $2.8{\times}3.1\;cm$-sized mass on the right breast which was starting appeared 1 year earlier. The preliminary cytological examination of the material obtained by needle aspiration biopsy from the mass was revealed by fibroadenoma with no malignant change. The patient had the surgical excision of the mass and accessory breast. Case 2, a 16 year-old woman admitted for intra-areolar polythelia of the left breast, even she doesn't have any family history of polythelia. Since she wanted surgical correction of her atypical nipple for aesthetic and psychological reasons, we reconstructed the areola using transposition flaps in an S-plasty design. Results: Case 1, the excised supernumerary nipple showed following histological features. In the superficial layer, an acanthotic and hyperpigmented epithelium with elongated rete ridges was found. In the dermis, there were follicles with hairs surrounded by hypertrophic sebaceous glands. In the deepest portion, abundant secretory glomerules and excretory ducts of apocrine gland type were observed. Case 2, follow-up visits 3 months after the procedure showed a satisfactory result with good shape and projection of the nipple. Conclusion: We report two cases of aberrant mammary tissue who underwent surgical correction, including complete breast (with nipple, areola, and glandular tissue) and intra-areolar polythelia according to the Kajava's classification, and the results were satisfactory.

• Journal of Science of Art and Design
• /
• v.3
• /
• pp.87-144
• /
• 2001

This study looks into historical genealogy of autonomy in art criticism on modernism and presents the view of the judgment and correction about that. A matter of autonomy in art appeared in the attempt to totally reconsider and upset the theory of 'Mimesis' or 'Representation' which was the basis of traditional aesthetic theory. In the traditional theory of representation, they assumed primary image exists first and then tried to obtain visual similarity to it through art works. However, in the theory of autonomy in modernism, they maintained the reduction to pure form' or medium', regarding what art works represents and how similar to primary image are not the true essence of art. In the early 20th century, C. Bell laid the foundation stone of the theory of Formalism', providing that a matter of autonomy is significant form', which is the combination of lines and colors Aesthetic autonomy theory came to a climax by C. Greenberg, who systemized art criticism on modernism in the middle 20th century. According to his theory, the pursuit of the essence of form resulted in the specificity of medium' and flatness. They thought that the autonomy of art would be achieved by eliminating outward social factors from art works. This theory ended by Minimalism preventing the instructive function of art work and only emphasizing its material property. Since the middle 20th century, the autonomy theory was confronted with the limit and intense attack because it resulted in this fixed canon and materialism, so they began laying emphasis on those extrinsic factors around art works such as human life, society, history, and so on. This study focuses on arguing and complementing the limit of autonomy such as the adhesive and fixed canon, and then defining the more dynamic area of it. For this, first, I introduced the view of T. J. Clark and T. Crow who criticized the aesthetic autonomy theory. They denied the transcendental structure of form, and found form only in the association with substantial life and society. And they insisted the dynamism of form by emphasizing form as a result of negation insisted by avant-garde. Second, I researched the view of A. C, Danto and M. Fried, who complemented the traditional autonomy theory. They made autonomy emerge from the fixation of form like flatness through connecting essentialism with historical view. In conclusion, I insist that autonomic position of art make it possible to connect or mediate between material form and human or social elements. Therefore, autonomy should not be reduced to the axis of form or that of society but make interaction between two heterogeneous axes.