• The Korean Journal of Emergency Medical Services
• /
• v.25 no.3
• /
• pp.93-109
• /
• 2021

Purpose: This study aims to investigate the knowledge and attitudes regarding adverse drug reactions (ADR) of emergency medical services (EMS) students, so that suggestions for further education on ADR can be made. Methods: A survey on knowledge and attitude was created and modified according to Lee's and Kim's test tool. In total, 149 students' data were collected and compared with previous studies. Results: Knowledge of ADR was relatively low (54%) but attitude was relatively high (75%). Clinical experience was important in knowledge and attitude. Knowledge and attitude showed a positive correlation. Conclusion: Increased knowledge of ADR leads to a more active attitude towards it. Hence, modification of the education system to provide a more personalized education is required.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.117-129
• /
• 2009

This paper studied the safety management network system of infrastructure which constructed smart sensors, closed-circuit television(CCTV) and monitoring system. This safety management of infrastructure applied to bridge, cut slop and tunnel, embankment etc. The system applied to technologies of standardization guidelines, data acquirement technologies, data analysis and judgment technologies, system integration setup technology, and IT technologies. It was constructed safety management network system of various infrastructure to improve efficient management and operation for many infrastructure. Integrated safety management network system of infrastructure consisted of the real-time structural health monitoring system of each infrastructure, integrated control center, measured data transmission using i of tet web-based, collecting data using sf ver, early alarm system which the dangerous event of infrastructure occurred. Integrated control center consisted of conference room, control room to manage and analysis the data, server room to present the measured data and to collect the raw data. Early alarm system proposed realization of warning and response within 5 minute or less through development of sensor-based progress report and propagation automation system using the media such as MMS, VMS, EMS, FMS, SMS and web services of report and propagation. Based on this, the most effective u-Infrastructure Safety Management System is expected to be stably established at a less cost, thus making people's life more comfortable. Information obtained from such systems could be useful for maintenance or structural safety evaluation of existing structures, rapid evaluation of conditions of damaged structures after an earthquake, estimation of residual life of structures, repair and retrofitting of structures, maintenance, management or rehabilitation of historical structures.

• The Journal of Society for e-Business Studies
• /
• v.9 no.1
• /
• pp.61-81
• /
• 2004

Learning Contents Management System(LCMS) manages the contents and the process of teaming by incorporating the both in a flexible system to help learners to be able to utilize them efficiently. The e-Learning comprises all types of educations based on electronic technologies as well as the Web. The existing e-Learning system is a simple information system providing Web based contents, therefore, it cannot support flexibility for both learners and teachers. The core part of the e-Learning system should be a remote education system which creates bilateral response between the learners and teachers, by providing substantial contents based on the LCMS. In this paper, a new e-Learning system is constructed with reusable modules generated by Component-Based software Development(CBD). Furthermore, creates new contents groups and enables to develop learning courses utilizing the Learning Objects. And also, observing the SCORM standard, lecture contents are designed and prepared to support learners Learners are supported to produce profiles which enables themselves to manage, measure, and evaluate their own capabilities, so that they can develop themselves properly in accordance with their levels, build prototypes for self development. Also a system that comprises all these individual components is suggested.

• Tunnel and Underground Space
• /
• v.31 no.1
• /
• pp.10-24
• /
• 2021

Rock mass classification for construction of underground facilities is essential to secure their stabilities. Therefore, the reliable values for rock mass classification from the precise information on rock discontinuities are most important factors, because rock mass discontinuities can affect exclusively on the physical and mechanical properties of rock mass. The conventional classification operation for rock mass has been usually performed by hand mapping. However, there have been many issues for its precision and reliability; for instance, in large-scale survey area for regional geological survey, or rock mass classification operation by non-professional engineers. For these reasons, automated rock mass classification using LiDAR becomes popular for obtaining the quick and precise information. But there are several suggested algorithms for analyzing the rock mass discontinuities from point cloud data by LiDAR scanning, and it is known that the different algorithm gives usually different solution. Also, it is not simple to obtain the exact same value to hand mapping. In this paper, several discontinuity extract algorithms have been explained, and their processes for extracting rock mass discontinuities have been simulated for real rock bench. The application process for several algorithms is anticipated to be a good reference for future researches on extracting rock mass discontinuities from digital point cloud data by laser scanner, such as LiDAR.

• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.623-646
• /
• 2021

As the demand for electric power increases with acceleration of electrification at home and abroad, the needs for coal-fired electrical power plant are accordingly increased. However, these coal-fired electrical power plants induce also many environmental problems such as increase of air pollutants, increase of possibility of land contamination by reclamation of coal ash, even though these power plants have a good economical efficiency. In case of a by-product of coal-fired electrical power plants, only 70% of them are recycled and the remaining 30% of by-product are fully buried in surrounding ground. Consequently, this study deals with coal ash backfilling mechanism in abandoned mine openings for the purposes of increasing the coal ash recycling rate as well as securing the mine area stability. In order to analyze the backfill and ground reinforcement by interaction between rock mass and backfills, the copying samples of discontinuous surface with different roughnesses were produced for bond strength tests and direct shear tests. And statistical analysis was also conducted to decide the characteristics of bond and shear behavior with joint roughness and their curing day. Numerical simulations were also analyzed for examining the effect of interface behavior on ground stability.

• The Korean Journal of Emergency Medical Services
• /
• v.14 no.3
• /
• pp.5-11
• /
• 2010

Purpose: This study was to clarify correlation between en route distance and role time on call received hours. Methods: Data on en route distance(dependent variable), role time(independent variable) from 387 prehospital care reports documented by EMS in Kyonggi Provincial Fire and Disaster Headquarters and Seoul Metropolitan Fire and Disaster Department between 21 and 10 June 2010 were randomly chosen for simple regression analysis using Windows SPSS 12. OK. This analysis was conducted nine times on unit hour divided to eight call received and overall. Results: Statistically significant regression equations( Y=2.414+1.206X for 09:00~11:59, Y=3.753+.662X for 12:00~14:59, Y=2.215+1.458X for 15:00~17:59, Y=2.600+.822X for 21:00~23:59, Y=5. 445+.263X for overall) were derieved from the data. Conclusion: These equations having linear relationship may be utilized as a method for system status management to effectively response to emergency call.

• Proceedings of the KIEE Conference
• /
• 2008.10a
• /
• pp.75-76
• /
• 2008

전력거래소는 전격계통 안정된 운영과 공정한 전력시장 운영을 주요 임무로 하며, 이를 위하여 전국의 80여개의 발전소와 600여개 변전소로부터 발전량, 전압, 조류, 자단기 상태정보 등 다양한 전력계통 자료를 취득하고 있다 전력거래소의 중앙급전소에는 이와 같은 계통자료 취득은 물론 발전량 제어기능을 수행하기 위한 에너지관리시스템(이하 EMS 라 한다)을 운영하고 있으며, 발,변전소에는 현장의 전력설비와 연결되어 계통자료를 취득하여 EMS로 전송하는 원격소장치 (이하 RTU 라한다)를 운영하고 있다. 자료취득 경로는 모든 발전소와 34skv급 이상의 변전소의 경우 EMS와 RTU가 직접 연결되어 자료를 취득하며 154Kv급 이하 변전소는 12개 지역급전소의 자료취득제어시스템(이하 SCADA라 한다)를 경유하여 자료를 취득하고 있다. 전력계통의 대형화와 복잡화에 따라 계통해석기능 자동발전제어기능에 의한 계류운영으로 정보기술에 대한 의존도가 증가하고 있으며, 변동비 반영시장의 개선운영에 따라 공정한 전력시장 운영과 안정된 전력계통 운영을 위해 전력계통 취득자료의 신뢰도가 요구되고 있다. 따라서 EMS를 비롯한 RTU, 통신망 등 전력계통 자료취득 설비의 운영실적을 분석하여 각 시스템별 고장 고장원인 고장유형 등을 고찰하므로써 시스템 성능개선을 위한 설비투자와 운영개선에 반영하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.357-359
• /
• 2000

This paper is to introduce the R&D project called "Improvement of Automatic Gene-ration Control Related Systems for New Energy Management system". The principal objective of this project is to demonstrate AGC operation capabilities that are suitable to new EMS environment and to show the validity of Set-Point Control Method. A number of developments and enhancements have been made to the generator's Remote Terminal Unit in which new ASTC is being developed and installed. The so-called ACC Signal Transfer Card(ASTC) will include RTU's Set-Point Control capabilities. It is expected that over next few months both RTU & DCS software modifications will be given and a relatively new Set-Point Control Method will be chosen instead of those from more conventional method, pulse control method.

• The Magazine for Energy Service Companies
• /
• s.84
• /
• pp.8-11
• /
• 2013

지난 5월 28일 국무회의에서 박근혜 대통령은 "과학기술을 통한 에너지 효율성을 제고하거나 낭비를 막는 방법도 있고 스마트 그리드 같은 IT기술을 이용해서 실시간으로 자신이 얼마를 소모하는지 알려줌으로써 스스로 아껴 쓸 수 있는 방법이 있는데, 그런 방안도 적극 연구해 달라"고 당부했다. 실제로 우리 산업은 현재 ICT기술과 전력시장을 창조적으로 융합하여 새로운 시장을 형성하고, 이를 통해 신(新)성장동력, 신(新)서비스업을 육성해야 하는 시점에 직면해 있다. 전력공급에 소요되는 사회적 비용이 급증하여 빠른 속도로 증가하는 수요를 충족시키는데 많은 어려움이 있는 것도 사실이다. 늘어나는 수요에 따라 공급을 확대하는 공급중심 정책에서 합리적으로 수요를 줄인 후 공급을 확대하는 수요관리 중심의 정책으로 전환이 필요한 때이다. * 연평균 전력소비증가율('00~'10년, %) : 한국 5.3('10년 10.1), 일본 0.2, 미국 0.7, OECD 평균 1.0 최근 다각도로 전력 사용을 줄이기 위한 이벤트가 실시되고 있는데 실내온도 제한 등 일시적 절약에서 벗어나, 세계적 수준의 우리 ICT기술을 활용하여 근본적이고 시스템적인 수요관리 추진이 필요하다. 한편 전력수급 위기를 새로운 시장창출의 기회로 만드는 발상의 전환을 통해 창조경제시대의 신성장동력과 일자리를 창출하게 되는 기회가 될 수 있다. 이는 전통적인 에너지산업에 2차전지산업, 소프트웨어 산업을 융합하여 ESS, EMS, LED 등 ICT기반 에너지 신산업 시장 진출을 의미한다. 이번호에서는 ESS(Energy Storage System)라고 불리는 에너지저장장치에 대해 살펴보고자 한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2171-2176
• /
• 2012

PCs and its peripherals uses more power in standby mode even if they are not actually being used. In particular, PCs and its peripherals used in school and office, plugged in at all times during working hours, but not used much time, even if turned off consume a portion of the power. In this paper, we developed Networked Smart Plug for Power Management of PC & Peripherals which is consist of EMS, Smart Plug, PC Agent and Smart Phone App. for power saving of PC and a variety of peripheral devices in office or home, and evaluated the performance of the system.