• Journal of Biosystems Engineering
• /
• v.18 no.1
• /
• pp.15-20
• /
• 1993

Wearness has been a major failure criterion in Korean-made rotary blade. However, few studies have been conducted to improve it. In this study, the fundamental data obtained from the measurement of wearness and failure of rotary blade were analyzed to provide a guideline for the design of rotary blades. For the straight part(about 20-23 em from bolt hole) from the bolt hole to bending point of rotary blade, modifications were proposed for improvements, however, for the portion from bending point to tip was made no design recommendations because the failure behavior of that portion was difficult to analyze with the experimental data. The results are summarized as follows. 1. The current V-shape section has to be moved about 5 em toward the bending point of rotary blade. 2. The section modulus at the portion about 5-7 em distant from bolt hole has to be increased about 15-20 %. 3. The V-shape section has to be changed into U-shape to reduce the on account of recieving initial stress in blades. 4. The radius of curvature of the neck(the portion about 5-7 cm apart from bolt hole) has to be made larger to decrease the stress concentration.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.47-52
• /
• 2014

A simple RC circuit model of large-scale touch screen panels is developed and the frequency range of the RC model is analyzed. 2D EM simulation results of a single touch cell are cascaded for a 23 inch touch panel using a circuit simulator, and the shortest and longest channels of the full panel are modeled with a 5-element RC circuit. The 5-element RC circuit can model the touch screen panel upto 130 kHz with the channel phase error of $10^{\circ}$. 7-element RC circuit model is also proposed and the frequency range for the channel phase error of $10^{\circ}$ is extended to 200 kHz.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.8
• /
• pp.233-246
• /
• 2020

This paper investigates the effect of the involvement of the board chairman in the audit committee (AC) on earnings management (EM). It examines Bursa Malaysia-listed companies with the lowest positive earnings for the years 2013 to 2015. The Modified Jones Model by Kasznik (1999) was used to determine discretionary accruals. An AC that includes its board chairman as an ordinary member is associated with greater discretionary accruals. However, a board chairman who is also the chairman of the AC does not seem to influence discretionary accruals. This paper supports the agency theory and policy-makers' efforts to prevent board chairmen from sitting on ACs. It is the first study that uses the agency theory to describe the association between the board chairman's involvement in the both AC and EM. This study alerts policy-makers, stakeholders and researchers to the influence of a board chairman serving on the AC in curbing EM. Furthermore, it provides empirical evidence that the majority of Malaysian companies whose board chairmen are involved in the AC appoint the chairman as an ordinary member of the AC. This indicates that executive directors may affect such actions. Hence, more policies are needed to improve AC independence.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1853-1855
• /
• 2000

An experimental investigation has been performed in order to understand the $\Phi$-q-n characteristics related to the PD taking place from the various size of artificial defects inserted in epoxy insulation. In this purpose, PD has been detected simultaneously by two different methods such as commercialized PD detector(TE571) and our detection system using self designed CT type sensor. Under the presence of void in epoxy insulation, PD has been initiated at the voltages between 16kV and 20kV which are much lower than the dielectric strength of epoxy insulation (130kV/mm$\sim$l50kV/mm). And also it is revealed that $\Phi$-q-n characteristics have been observed to be dependent upon the size of the artificial defects. Throughout this work, the on site applicability of the self designed Sensor has also been proved by comparing the results with those from the commercialized PD detector. And more one, considerable basic data regarding the insulation, diagnosis could be provided to understand the presence of the voids possibly inserted into the epoxy insulation system of the power apparatus.

• Applied Microscopy
• /
• v.51
• /
• pp.13.1-13.7
• /
• 2021

The novel coronavirus, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has arisen as a global pandemic affecting the respiratory system showing acute respiratory distress syndrome (ARDS). However, there is no targeted therapeutic agent yet and due to the growing cases of infections and the rising death tolls, discovery of the possible drug is the need of the hour. In general, the study for discovering therapeutic agent for SARS-CoV-2 is largely focused on large-scale screening with fragment-based drug discovery (FBDD). With the recent advancement in cryo-electron microscopy (Cryo-EM), it has become one of the widely used tools in structural biology. It is effective in investigating the structure of numerous proteins in high-resolution and also had an intense influence on drug discovery, determining the binding reaction and regulation of known drugs as well as leading the design and development of new drug candidates. Here, we review the application of cryo-EM in a structure-based drug design (SBDD) and in silico screening of the recently acquired FBDD in SARS-CoV-2. Such insights will help deliver better understanding in the procurement of the effective remedial solution for this pandemic.

• Journal of fish pathology
• /
• v.19 no.3
• /
• pp.267-276
• /
• 2006

Seventy-five streptococci were isolated from diseased olive flounder, Paralichthys olivaceus in Jeju. Their drug susceptibility and transferable multiple drug resistance were characterized. All isolates were resistant to flumequine (AR) and oxolinic acid (OA) and 26 isolates (34.7%) showed 4～6 multiple resistance of ampicillin (ABPC), AR, doxycycline (DOXY), erythromycin (EM), norfloxacin(NOR), OA and oxytetracycline (OTC) in various combinations. pST9 of a transferable R plasmid was detected from a multiple drug resistance strain, Streptococcus sp., ST9 originated from diseased flounder in Jeju, previously. We performed DNA hybridization to know the distribution of plasmid with the same DNA structure as pST9 in streptococci. Thirteen out of 60 isolates analyzed were positive in colony DNA hybridization and the part of bacteria isolated from raw meal was also hybridized with pST9. It suggested that raw meal is one of the origin of the resistance plasmid and R plasmid with DNA structure differing from pST9 is also involving in multiple drug resistance of the streptococci. In conjugation experiment, we found transferable R plasmid carrying OTC, DOXY and/or EM resistance determinant in the 13 resistance strains. all of the streptococci carrying the transferable R plasmid were similar in RAPD patterns. However, pST -type R plasmid was rare in S. iniae most frequently appearing in flounder farm.

• Korean Journal of Animal Reproduction
• /
• v.25 no.4
• /
• pp.371-379
• /
• 2001

The objective of this study was to establish an effective cryopreservation method of in vitro-produced bovine embryos. For the vitrification, in virtro-produced embryos at 8-cell, morula and blastocyst stages were exposed to freezing solution containing 5.5 M EG (EG 5.5) for 20 sec, loaded on each containers such as EM grid, OPS and Cryo-loop, and then immediately plunged into liquid nitrogen at -196$^{\circ}C$. Thawed embryos were serially diluted in 0.5, 0.25 and 0.125 M sucrose in m-HPBS, each for 1 min, and cultured in CRlaa medium supplemented with 10% FBS. Significant differences in the rates of re-expanded and hatched embryos were not observed among these embryo containers. The total cell number of expanded blastocyst cultured in vitro after vitrification was examined by Hoechst staining. There were no differences between non-vitrified (180.0 $\pm$ 5.4) and vitrified groups (178.0 $\pm$ 7.5). In addition, when the cellular injuries after vitrification were compared by double staining. There were no significant difference in the ratio of live and dead cells between non-vitrified group (176 : 4) and vitrified group (172 : 6). Therefore, these results suggest that bovine embryos can be cryopreserved easily, effectively and successfully by vitrification using various containers, such as EM grid, OPS or Cryo-loop in the presence of EG 5.5 freezing solution.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.3
• /
• pp.52-62
• /
• 2017

The purpose of this study is to develope an assessment method for parking lot remodeling alternative by adopting the asset management technique. In order to identify the Level of Service(LOS) and the Evaluation Measurement(EM), literatures was implemented which documented the consideration of parking lot plan, needs of the apartments' tenant, and various design standards. In addition, the authors conducted a three-time delphi survey for the identified 5 LOS and 19 EM to evaluate suitability and necessity of them and to collect additional opinion of experts. The LOS of parking lot were categorized into 5 areas such as Environmental effect and Convenience, Accessibility and so on. The 19 EM were determined to estimate the LOS quantitatively. The researchers analyzed the degree of importance of LOS and EM by using the Analytic Hierarchy Process (AHP) method. But construction cost was excepted from the analysis, because it is used as an independent variable in alternative assessment. In conclusion, the authors proposed the estimation criteria for EM, and the method and process for alternative assessment be performed to benefit-cost analysis using the LOS variation and construction cost. The assessment method for parking lot remodeling alternative was demonstrated effective to assess the parking lot remodeling alternative by case-study. This study has a academic significance by adopting the asset management techniques in the area of the parking lot remodeling. And the assessment method is expected to help deciding a reasonable remodeling alternative of parking lot, as it ensures the diversity for remodeling of the parking lot and reflects the needs of the occupant.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.6
• /
• pp.294-302
• /
• 2023

Ni-Mn-Zn ferrite, Ni_0.5-xMn_xZn_0.5Fe₂O₄ (0 ≤ x ≤ 0.5), was synthesized using the sol-gel method to investigate the crystal structure, microstructure, magnetic properties, high-frequency characteristics, and electromagnetic (EM) wave absorption characteristics as a function of Mn substitution. As the Mn content increased, a continuous decrease in saturation magnetization (M_S) was observed with little change in coercivity (H_C). Samples for each composition (x) exhibited strong EM wave absorption performance with first and second strong EM wave absorption regions satisfying minimum reflection loss, RL_min < -40 dB in the 1.5~2.5, 6~11 GHz range, respectively. The EM wave absorption in Ni-Mn-Zn ferrite depends on magnetic loss, and adjusting µ' and µ'' spectra by Mn substitution or H field allows control of the EM wave absorption frequency.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2001.09a
• /
• pp.122-140
• /
• 2001

We have applied the geophysical survey, mainly electric and electromagnetic (EM) methods, to a test site contaminated by hydrocarbon waste disposal and local spill. The multi-frequency, moving source & receiver EM survey along with ground penetrating radar (GPR) showed a fairly good performance in detection of buried metal pipes and objects. Magnetic survey measuring vertical and horizontal gradients were so sensitive to the small metallic objects spread over the surface that it's hard to discriminate the buried pipe. We chose electrical resistivity, EM and GPR survey to examine the soil contamination. Depth slices of resistivity distribution as the results of the inversion of resistivity and EM data coincided each other and closely matched the contaminated area determined by chemical analysis of the soil samples. GPR images did not show the reflection events related with contamination plume since there are no distinct spill in this site. We inferred the contamination using the penetration depth of the GPR energy, which could be used as auxiliary information to the resistivity and EM results. We summarized the applicability of each survey methods based on this results and proposed a desirable survey scheme for the determination of hydrocarbon contaminated site.