• Resources Recycling
• /
• v.21 no.3
• /
• pp.3-14
• /
• 2012

In order to review the recycling status of urban mine resources in China, recycling of ELV(End of Life Vehicles), E-waste(WEEE) and nonferrous metals were surveyed. Number of the sales volume of the new vehicles were over more than ten million and number of discharge vehicles are increasing now. However, recycling system has not been managed smoothly in China. Though usage of home appliances in urban is similar with advanced countries, there are significant differences in rural community. In the other hand, China is the country with the largest E-waste import in the world. Production and consumption of the nonferrous metals are increasing year by year in China, but recycling of metals is not enough.

• Resources Recycling
• /
• v.27 no.2
• /
• pp.11-23
• /
• 2018

The need for remanufacturing automotive parts is required due to the depletion of resources, rising raw material prices and strengthening environmental regulations. For remanufacturing, stable supply and demand of core must be accompanied. At present, remanufacturing companies collect cores through various routes, but the recovery rate of cores from the End-of-Life Vehicles is low. If we can systematically collect cores from hundreds of thousands of ELVs that were generated each year, the recovery rate of the core for remanufacturing will be further improved. Therefore, in this paper, we tried to establish a classification system for the ELV as a method for collecting the cores from the ELV. First, we selected the elements affecting the classification and determined the scope for the evaluation. The final rating classification is established by calculating the weights among the influence elements. Finally, through the case study, the dismantling grade of the actual ELV was evaluated to derive the second grade.

• Journal of Korean Institute of Industrial Engineers
• /
• v.38 no.3
• /
• pp.208-219
• /
• 2012

As the number of end-of-life vehicles (ELVs) has kept increasing, the management of ELV has also become one of the academic research focuses and European Union recently adopted the directive on ELVs. For the stakeholders has become a principle agent of dealing with all about ELVs, it is relevant investment decision to set up and to decide high-cost ELVs entity locations and to forecast future ELVs' amount in advance. In this paper, transition probability matrixes between months are made by using Markov Chain and the number of ELVs is predicted with them. This study will perform a great role as a fundamental material in Korea where just started having interests about recycling resources and studies related to the topic. Moreover, the forecasting method developed for this research can be adopted for other enhancements in different but comparable situations.

• Resources Recycling
• /
• v.21 no.2
• /
• pp.17-33
• /
• 2012

In order to review the recent technological progress and issues on the urban mine resources recycling in Japan and Korea, recycling process of the ELV(End of Life Vehicles) and E-waste(WEEE) were studied. Although technological level for processing of the ELV and E-waste is almost similar in both countries, the treatment of hazadous materials of ELV such as freon, air bag and ASR is unsufficient in Korea. In the E-waste recycling, the technological level is deeply different according to the enterprise size in Korea. Finally, the big R&D project on recycling of urban mine resources sponsored by government in both countries were discussed.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.3
• /
• pp.1-7
• /
• 2015

In this study, properties of Pb-free solders for automotive electronics parts were discussed. Lead-free solders for electronics became important after RoHS (Restriction of the use of certain Hazardous Substances) to avoid environmental pollution. Also the growing electronic rate in automotive parts and ELV (End-of Life Vehicles) make Pb-free solder for automotive electronics to be inevitable trend. Definitely, Pb-free solder for automotive electronics should have good wettability, basic strength, but need more reliability than other solders, since it has harsh condition like high temperature, humidity and engine vibration. Thus, shear strength test, thermal shock, drop test and many others are needed to ensure the high reliability. This study describes the properties and requirements of Pb-free solders for automotive electronics.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.76-76
• /
• 2010

무연솔더 재료를 자동차 전장품에 적용하기 위해서는 고온환경에 대한 내구성 및 진동 인자에 대한 영향을 고려해야한다. 특히, ELV(End of Life Vehicles) 지침이 개정됨에 따라 고온용 무연솔더 재료에 대한 재평가가 반드시 필요한 시점이다. 이에 대해 본연구에서는 현재 상용화 된 Pb-free솔더의 재료들 중 총 4종의 Solder을 선정하여 자동차 환경에 부합하는 진동조건하에서 시험해보았다. 그리고 미세조직의 특성, 접합부 형성시의 기계적 강도 및 접합부의 신뢰성을 평가하여 보았다. 각각의 조성에 대한 CHIP type과 QFP type의 실장부품을 준비하였으며, 각각의 조성별로 솔더 페이스트로 Daisy Chain PCB에 접합하여 조성에 따른 비교 데이터를 구축할 수 있었다. 리플로우 공정후 초기의 미세조직 및 전당강도, 저항값을 측정하여 진동시험에 따른 데이터와 비교하였다. 주파수는 10Hz~1,000Hz였으며, 진동가속도는 $29.4m/s^2$, 20시간의 랜덤진동이 적용되는 동안 챔버내의 온도는 상온으로 유지되었다. 진동시험과 이에 따른 저항측정을 통하여 진동 주파수와 시간에 따른 실장 부품이 받는 진동 영향과 실시간 저항값을 측정하였으며, 이때의 미세조직 비교를 통해 진동특성을 평가하였다. 진동 주파수에 따른 저항값의 변화가 있었으며, 진동전후 전단강도에도 영향을 주었다. QFP type에서는 SAC105가 진동에 가장 취약하였으며, CHIP type에서는 SACX0307이 진동에 가장 취약하였다.

• Clean Technology
• /
• v.18 no.4
• /
• pp.373-378
• /
• 2012

The end-of-life vehicles (ELV) are important recycling sources, and there are several stages involved in the recycling such as dismantling, shredding, and treatment of shredder residues (ASR). The legal recycling rate should be at least 95% on and after 2015, while we need a proper system to monitor recycling of ELV components and to calculate the practical recycling rate. The paper suggests a monitoring system that calculates practical recycling rates of dismantled components by use of a database of standard recycling rate as well as a web-based monitoring, which is linked to the Eco Assurance system for electric & electronic equipment and vehicle (EcoAS). Also the system supports dismantling and monitoring process by incorporating a standard vehicular component database, which facilitates recording dismantled weight data but also monitoring of dismantled components.

• Korean Journal of Materials Research
• /
• v.19 no.6
• /
• pp.337-343
• /
• 2009

In this study, we optimized Pb-free Sn/Ni plating thickness and conditions were optimized to counteract the environmental regulations, such as RoHS and ELV(End-of Life Vehicles). The $B_{10}$ life verification method was also suggested to have been successful when used with the accelerated life test(ALT) for assessing Pb-free solder joint life of piezoelectric (PZT) ceramic resonator. In order to evaluate the solder joint life, a modified Norris-Landzberg equation and a Coffin-Manson equation were utilized. Test vehicles that were composed of 2520 PZT ceramic resonator on FR-4 PCB with Sn-3.0Ag-0.5Cu for ALT were manufactured as well. Thermal shock test was conducted with 1,500 cycles from $(-40{\pm}2)^{\circ}C$ to $(120{\pm}2)^{\circ}C$, and 30 minutes dwell time at each temperature, respectively. It was discovered that the thermal shock test is a very useful method in introducing the CTE mismatch caused by thermo-mechanical stress at the solder joints. The resonance frequency of test components was measured and observed the microsection views were also observed to confirm the crack generation of the solder joints.

• Resources Recycling
• /
• v.14 no.3
• /
• pp.37-47
• /
• 2005

Global automobile manufacturers have made a lot of efforts to comply European Union (EU) end-of-life vehicles (ELVs) Directive. Hyundai and Kia have also made a lot of studies to eco-friendly treat our ELVs. Some results of studies have already reflected on our models to produce eco-friendly vehicles. This paper introduces our status of the recycle technology and our measures to respond to EU ELVs Directive.

• Resources Recycling
• /
• v.20 no.4
• /
• pp.23-35
• /
• 2011

In order to review the recycling status of urban mine resources in Taiwan, background and history of recycling industries, system of the recovery fund management committee(RFMC), copper recycling with non-ferrous metals, recycling of ELV(end of life vehicles) and recycling of EAF dust were surveyed. Taiwan is a leading country of the world in the metal consumption per capita. Therefore, a lot of waste metals were generated. In other words, urban mine resources are abundant in Taiwan and have some advantages in recycling. There are more than thou-sand recycling plants in Taiwan. Half of them are non-ferrous metal recyclers.