• 한국지능시스템학회논문지
• /
• 제11권6호
• /
• pp.558-562
• /
• 2001

In this paper, a fuzzy hyperresolution principle called CFHR. Compensatory Fuzzy Hyperresolution, with positive compensation facility is proposed. Usually hyperresolution has several terms of conditon parts. Theser terms have to be connected by the an connective. If the main/max operator to be used the and operation, there is some dependency problem of the min/max operator. So , we propose a compensatory operator EGM and applied it to the CFHR, We show the CFHR does more meaningful reasoning than existing method. We also prove the completeness of CFHR.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.99-104
• /
• 2006

The new gravity field combination models are expected to improve the knowledge of the Earth's global gravity field. This study evaluates eleven global gravity field models derived from gravimetry and altimetry surface data in a comparison with ground truth in South Korea. Geoid heights obtained from GPS and levelling in South Korea are compared with geoid heights from the models. The results show that the gravity satellites CHAMP, GRACE and LAGEOS plus gravimetry and altimetry surface data have led to an improvement in gravity field models. As expected, the new combination gravity field model which are EIGEN-CG03C and EIGEN-GL04C give better results than the predecessors widely used models(EGM96, OSU91A etc.).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.615-617
• /
• 2005

대기중에 위치한 뇌운안에 전하가 떠다니는 상태에서는 구름안과 주변에 높은 전계의 전위가 발생한다. 이 전하가 축적되면 대지 방전이 발생하고 송전선로 등에 뇌격이 침입하게 된다. 뇌 방전은 수 km에 달하는 대기중에 발생하는 거대한 전기현상이지만 이 낙뢰가 전기의 흐름이라는 것은 벤자민 프랭클린의 현장 시험에 대해 최초로 증명되었다. 이러한 대기중에 발생하는 거대한 전기현상인 낙뢰가 송전선로에 침입하여 송선선로 애자련을 섬락시키는 과정은 대단히 복잡한 전자기적인 현상이다. 그것은 가스 방전 현상, 감속에 중요한 역할을 하는 전자계의 빠른 변화, 도체와 철탑에 나타나는 코로 나와 관련된 비선형 효과 및 주파수 및 전류와 관련된 대지의 임피던스 통 다양한 현상이 종합적으로 관련된다. 따라서 가공 송전선로의 낙뢰에 대한 동작특성의 평가시 낙뢰 현상의 불규칙한 특성 및 신뢰할만한 데이터의 부족에 따른 많은 불확실성이 존재한다. 이 때문에 가공 송전선로에서 낙뢰에 의한 트립(Trip) 사고수의 계산을 위해 단순화된 방법이 아주 유용하며 효과적일 수 있다. 본 논문에서는 EGM (Electrogeometric Model) 모델을 사용하여 대지경사자의 크기에 따른 차폐실패 트립 사고율의 영향을 검토하였다.

• Korean Journal of Geomatics
• /
• 제5권1호
• /
• pp.1-6
• /
• 2005

When merging various datasets the perennial problem of relative weighting arises. In case of two datasets an iterative algorithm has been developed recently that allows the rigorous determination of optimal variance components of type repro-BIQUUE even for large amounts of data, along with the estimation of the joint parameters. Here we shall present this new algorithm, and show its versatility in an example that will entail the merging of two regional geoid estimates (derived from EGM 96 and CHAMP) in terms of certain series expansions which have been proven previously to belong to the most efficient ones (e.g., wavelets, Hardy's multi-quadrics, etc.). Future attempts will be devoted to the sequential merging of altimeter and tide gauge data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.452-454
• /
• 2001

This paper described the calculation results of lightning flashover rate on the 345kV and 154kV transmission system of KEPCO. The back-flashover rate and shielding failure rate was calculated by FLASH(lightning flashover rate calculation program from IEEE) and KEPRI's own program which is based on the EGM(Electro Geometrical Model) method. The estimated lightning flashover late of 345kV transmission system of double circuit was 1.0 flash per 100km-year, and the lightning flashover rate of 154kV transmission line was 2.0 flash Per 100km-year approximately.

• 한국측량학회지
• /
• 제25권5호
• /
• pp.393-398
• /
• 2007

국가 기준측지계가 세계측지계로 변경됨에 따라 모든 국가기준점의 좌표를 기존의 동경측지계에서 세계측지계로 변환해야 한다. 본 연구에서는 우리나라 삼각점자료 중에서 현재까지 남아있는 EDM 단일 관측지역의 세계측지계 좌표를 산정하였다. 이전의 정밀 2차 데이터 셋을 확보하여 이설자료를 조사 및 검증하여 데이터 셋에 갱신하고, 새로운 데이터 셋을 구축하였다. 구축된 데이터 셋을 국토지리정보원에서 고시한 변환파라미터를 이용하여 KGD2002 좌표계로 변환하였으며, EGM96 모델을 이용하여 지오이드고를 산정하고, 이전에 보정하지 않았던 지오이드고에 대한 영향을 분석하여 보정하였다 보정된 자료를 데이터 셋에 반영하고, GPS 2등 및 GPS망과 EDM망의 경계부분의 GPS 3등 기준점을 확보하여 경위도(BL) 망조정을 수행하여 최종 성과를 산출하였다. 최종 망조정 결과 표준편차(Mo)가 최소 1.37", 최대 2.13"로 나타났으며, 본 연구를 통하여 산출된 성과는 국가기준점성과로 사용 가능할 것으로 판단된다.

• Journal of Plant Biotechnology
• /
• 제37권4호
• /
• pp.511-516
• /
• 2010

아그로박테리움 매개에 의한 형질전환 기술을 이용하여 국내에서 육성된 품종 'Sweet Yellow'로부터 유도된 체세포배 (배발생캘러스 포함)로 intron-GUS유전자가 전이된 식물체를 획득하기까지의 과정이 제시되었다. Intron-GUS 유전자를 포함하고 있는 Agrobacterium tumefaciens AgL1(O.D=0.7~1.6)에 30분 감염시켜 3일간 공동배양 한 후 $4^{\circ}C$에서 7일간의 저온처리를 거친 후 cefotaxim $250\;mg{\cdot}L^{-1}$ 첨가 체세포배발아 배지에 배양된 체세포배 (배발생캘러스 포함)들 대부분으로 유전자가 전이된 것을 GUS transient assay에 의해 확인하였다. Intron-GUS유전자가 전이된 체세포배 (배발생캘러스 포함)로부터 신초원기를 유도한 후 신초를 재분화시켰고, 재분화된 신초로부터 다신초가 형성되도록 하였다. 다신초로부터 신초의 일부를 떼어 GUS transient assay 분석을 실시하여 intron-GUS 유전자의 발현을 확인한 후 발근시켜 순화 후 온실로 옮겼다. GUS transient assay에 의해 확인된 유전자 발현율은 100%였다.

• 한국측량학회지
• /
• 제36권1호
• /
• pp.1-8
• /
• 2018

To compensate for the shortcomings of spirit leveling, research on the determination of GNSS (Global Navigation Satellite System)-derived orthometric height has been actively carried out. However, most analyses were primarily performed inland. In this study, the influences of the arrangement of control points, observation duration, and geoid model on the accuracy of the GNSS-derived orthometric height have been analyzed to suggest the proper method to apply the determination of GNSS-derived orthometric height to the leveling loop disconnected area. As a result, it was found that two known points located near the unknown points need to be fixed in the leveling loop disconnected area. Further, 3 cm level of accuracy can be achieved if the GNSS survey is performed over two days, for four hours per day. In terms of the geoid model, the latest national geoid model should be applied rather than the EGM08 (Earth Gravitational Model 2008) to minimize regional bias and increase accuracy. Future research is necessary to apply the determination of the GNSS-derived orthometric height technique as a method to connect with the islands because the vertical reference system used inland and that used for the islands in Korea are still different.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권12호
• /
• pp.627-632
• /
• 2001

There are claims that ESE(Early streamer emission) Air terminals offer a vastly increased zone of protection over that of traditional lightning rods by causing the emission of an upward streamer/leader that will propagate towards the tip of downward leader at an early stage in the attachment process than would occur for a simple rod in the same geometrical configurations. This paper shows the results of comparing test a particular type of ESE air terminals with a simple rod conducted in the KEH HV laboratory, which are lightning impulse voltage test, flashover direction test and corona emission current measurement. The results from this test show a completely random scattering of flashovers to the conventional and ESE air terminals under identical electrics] and geometrical conditions, and thus shows no advantage of one terminal over the other.

• Design & Manufacturing
• /
• 제17권2호
• /
• pp.62-69
• /
• 2023

In this study, we conducted a study on the optimization of injection molding conditions to minimize deformation of plastic product. The charging management system housing of the vehicle was selected as the research subject. Melting temperature, cooling temperature, packing time, and packing pressure were selected as the main factors expected to affect the deformation of molded products. Each main factor was divided into 5 levels. Optimization of injection molding conditions to minimize deformation was performed using the Taguchi Method. We performed an analysis of variance (ANOVA) to identify significant factors affecting the deformation of plastic product. In order to select injection molding conditions that minimize deformation of plastic products, injection molding analysis was additionally performed for insignificant factors. We then compared the deformation of the molded part before and after optimization. As a result of comparing the injection analysis results of the basic conditions and the injection analysis results of the optimal conditions, it was confirmed that the amount of deformation after optimization was improved by about 10.9%.