References
- Kim, B.S. and Han, S.Y., Prediction of Weight of Spiral Molding Using Injection Molding Analysis and Machine Learning, Design & Manufacturing, Vol. 17, No. 1, pp. 27-32, 2023.
- Park, C.H., Pyo, B.G., Choi, D.H. and Koo, M.S., Design optimization of an automotive injection molded part for minimizing injection pressure and preventing weldlines, Transactions of the Korean Society of Automotive Engineers, Vol. 19, No. 1, pp. 66-72, 2011.
- Yoo, M.J., Han, S.R. and Kim, K.A., Influences of rib design on the product quality of injection molded, Journal of the Korean Society of Mechanical Technology, Vol. 24, No. 6, pp. 1166-1171, 2022.
- Sung, S.M. and Jung, S.J., A study on the motorcycle lear cowl injection molding by CAE analysis, Journal of the Korea Society of Die & Mold Engineering, Vol. 13, No. 4, pp. 34-39, 2019.
- Choi, H.J., Park, C.W. and Choi, S.D., Analyses on deformation patterns depending on the injection process for rear lamp reflectors of automotive, Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 4, pp. 32-37, 2010.
- Lee, Y.C., The Improvement of Weldline and Flow mark Defection by using Injection Molding Analysis, Journal of the Korean Society for Precision Engineering, Vol. 30, No. 12, pp. 1295-1301, 2013. https://doi.org/10.7736/KSPE.2013.30.12.1295
- Han, S.R., A study on the deformation optimization of a plastic bezel assembled on the steering wheel of an automobiles, Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 5, pp. 105-112, 2017. https://doi.org/10.14775/ksmpe.2017.16.5.105
- Yoo, M.J., Kim, K.A. and Han, S.R., Optimization of feed system of base mold for washing machine using CAE, Journal of the Korea Society of Die & Mold Engineering, Vol. 15, No. 1, pp. 1-7, 2021.
- Choi, K.K., Hong, S.M. and Han, S.R., Effect of flow pattern of coolant for injection mold on the deformation of injection molding, Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 4, pp. 92-99, 2015. https://doi.org/10.14775/ksmpe.2015.14.4.092
- Kim, K.A. and Han, S.R., A study on deformation improvement of plastic charging plug for electric car, Journal of the Korean Society of Mechanical Technology, Vol. 21, No. 4, pp. 653-658, 2019. https://doi.org/10.17958/ksmt.21.4.201908.653
- Kim, K.H. and Choi, J.Y., Design of Injection Molding Process Factors Blower Fan using the Taguchi Method, Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 92-97, 2012.
- Park, E.S., Shin, S.E. and Han, S.R., Optimization of injection molding process for plastic keypad on mobile phone, Journal of the Korea Society of Die & Mold Engineering, Vol. 11, No. 1, pp. 34-38, 2017.
- Park, D.Y., Park, D.H. and Lee, H.S., A study on the residual stress and spring back of thermoformed films, Design & Manufacturing, Vol. 16, No. 1, pp. 27-35, 2022.
- Kim, K.A. and Han, S.R., A study on the optimum molding of plastic pulley using numerical analysis, Journal of the Korea Society of Die & Mold Engineering, Vol. 14, No. 1, pp. 30-35, 2020.