• Journal of Surface Science and Engineering
• /
• v.50 no.5
• /
• pp.360-365
• /
• 2017

In this study, ion release and biocompatibility of sintered Ni-Cr-Ti alloy for dental prosthodontics have been researched by corrosion and cell culture test. The microstructures of the alloys were observed by optical microscope, and corrosion behavior was investigated using potentiostat (Model PARSTAT 2273, EG&G, USA). Cell culture was carried out using hGf cell in DMEM (Welgene Inc., South Korea) supplemented with 10% fetal bovine serum (FBS) (Welgene Inc., South Korea) and antibiotic antimycotic solution (Welgene Inc., South Korea). After corrosion and cell culture test, surface morphologies were observed by field-emission scanning electron microscopy. For wettability behaviors, contact angles were measured by wettability test. As the content of Ti increased, the number of pit decreased and the corrosion resistance was improved from anodic polarization test, also, polarization resistance of samples containing Ti remarkably improved as compared with the alloy not containing Ti. The sintered alloy showed a low contact angle due to the pores formed on the surface. The addition of Ti element showed that the cell survival rate was better than that of the control group.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.447-448
• /
• 2005

Recently, organic light emitting diodes(OLEDs) is widely used as one of the information display techniques. We synthesized 2-(2-hydroxyphenyl)benzoxazole($Zn(HPB)_2$). We studied the luminescent properties of OLEDs using $Zn(HPB)_2$. The ionization potential(IP) and the electron affinity(EA) of $Zn(HPB)_2$ investigated using cyclic-voltammetry(C-V). The JP, EA and Eg were 6.5eV, 3.0eV and 3.5eV, respectively. The PL and EL spectra of $Zn(HPB)_2$ were observed at the wavelength of 4S0nm. We used $Zn(HPB)_2$ as an emitting layer and hole blocking layer. At the experiment about hole blocking effect, we inserted $Zn(HPB)_2$ between emitting material layer(EML) and cathode, and hole transport layer(HTL) and emitting material layer(EML). We measured current density-voltage and luminance-voltage characteristics at room temperature.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.5
• /
• pp.494-499
• /
• 2023

In this paper, in order to apply the CF (color filter) type of the micro light emitting device (Micro LED) display method, a study on the manufacturing process of red and green phosphor inks for the inkjet process was conducted. The blue light-emitting KSF and LuAG phosphors were respectively used to control the phosphor particle size to about 1㎛, and a phosphor ink was prepared by synthesizing with a low-viscosity solution (IPA/Eg). A chemical dispersion method was applied to selectively control the dispersion characteristics in the manufacture of phosphor inks, and in particular, phosphor inks with a dispersant applied a dispersant secured stable dispersion characteristic compared to phosphor inks without a dispersion process. Therefore, it seems possible to manufacture CF for Micro LED through an inkjet process capable of controlling the dispersion characteristics of phosphor ink.

• Journal of Microbiology and Biotechnology
• /
• v.6 no.5
• /
• pp.352-357
• /
• 1996

The partition of proteins in the salt-rich phase of polyethylene glycol (pEG)/salt aqueous two-phase systems is limited by the salting-out effects of salt. The logarithm of the concentration of proteins partitioned in the salt-rich phase decreases linearly with increases in the concentration of salt in the salt-rich phase (salting-out). Therefore, the partition of a given protein in the salt-rich phase of aqueous two-phase systems can be estimated from the salting-out constant. The slope of the solubility line (salting-out con-stant) for a given protein is determined by the type of salt in the two-phase systems.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.225-228
• /
• 2008

This study shows that lignocellulosic biomass saccharification work has been carried out with rice-straw by the extracellular enzyme from KMU001, and the enzymes produced in 5%(w/v) wood biomass were characterized by protein and various enzyme activity measurements. Several cellulases such as Endoglucanase(EG), $\beta$-D-1,4-Glucosidase(BGL), Cellobiohydrolase(CBH), and $\beta$-D-1,4-Xylanase (BXL) were detected. Saccharification of rice-straw by the enzyme yielded about 233mg/g of glucose after 48hrs.

• Journal of Preventive Medicine and Public Health
• /
• v.22 no.2 s.26
• /
• pp.283-289
• /
• 1989

This study was conducted to investigate the association of the occurrence of pediatric diseases with environmental, seasonal and atmospheric factors. The data were collected at 5 pediatric clinics in Seoul and the Department of Pediatrics of Yongin Severance Hospital from May 1986 to April 1987. The results were as follows: 1. Vacation periods had a great influence upon the occurrence of pediatric diseases. 2. The majority of pediatric diseases occurred mainly in spring and autumn, not in summer and winter. 3. The higher the average relative humidity was, the less diseases occurred : and the higher the maximum change of daily temperature, the more diseases occurred. 4. In summer, the pattern of diseases varied along with the environmental factors(eg., toilet).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.993-996
• /
• 2001

In the composition of 0.16BaO-0.15(Nd$\_$0.87/,Bi$\_$0.13/)$_2$O$_3$-0.69TiO$_2$$.$Glass [EG-2782] 3wt% addition sintered at 1080$^{\circ}C$, we could obtained microwave properties of dielectric constant $\varepsilon$$\_$r/= 80.1, quality factor Q ${\times}$ f = 810 (at 3.5 GHz]) and temperature coefficient of resonant frequency $\tau$$\_$f/ = -1.3 [ppm/$^{\circ}C$]

• Journal of the Korean Ceramic Society
• /
• v.33 no.5
• /
• pp.495-506
• /
• 1996

Monodispersed colloidaly yttria(Y2O3) can be used in a variety of applications such as phosphors. IR transparent materials and fine ceramics. For preparing monodispersed yttria homogeneous precipitation has been regarded as a fovorable method that is monodispersed yttria can be obtained through calcining monodispersed colloidal compound of yttrium (eg:Y(OH)CO3.nH2O)which can be prepared by homogeneous precipitation with urea. It is however still required to find out the quantitative effects of important variables of precipitation such as concentration of yttrium and urea reaction temperature and initial pH of reactant even though homogeneous precipitation of Y3+ with urea has been studied extensively. Among the effects of these variables we investiga-ted 1) the effect of yttrium concentration on the shape and size of precipitate and the reation rate 2) range of yttrium concentration required to make monodispersed colloidal particles 3) the reason for limited concentra-tion range of yttrium and 4) the effect of ultrasonic radiation on the limited concentration.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.5
• /
• pp.860-865
• /
• 1997

Investigations were performed on the effects of extraction temperature, pressure, time on solubility and selectivity of egg yolk lipid and cholesterol, and color and fatty acid composition of the residue in supercritical carbon dioxide(SC-Co$_2$) extraction. Lipid and cholesterol solubility increased as the increase of Co$_2$ density and was found to strongly depend on the extraction pressure rather than the extraction temperature. The relative concentration of cholesterol in the extract increased with an increase in temperature and decreased with an increase in pressure and extraction time. extraction of dried eg yolk for 3hr at 4$0^{\circ}C$/276 bar removed 46.1% of cholesterol from the residual egg yolk with a yield of 63.2%. SC-Co$_2$ extraction produced a lighter color egg yolk with less redness and yellowness. As the extraction time increased, the resultant residual egg yolk became more saturated with fatty acids. SC-$CO_2$ extraction offers a safe, natural method for removing cholesterol from dried egg yolk.

• Textile Coloration and Finishing
• /
• v.15 no.5
• /
• pp.327-332
• /
• 2003

In this study, the polyurethane microcapsules for non-aqueous dyeing containing iron oxide and disperse dyes were prepared by in-situ polymerization method using hexamethylene diisocyanate(HDI) with ethylene glycol(EG). And the size, shape, and particle size distribution of microcapsules prepared were investigated. The size and shape of microcapsule were observed by optical microscope and scanning elecron microscope. The particle size distribution was analyzed by particle size analyzer. The microcapsule size and its distribution were largely effected by the existance of surface active agent in the system. When a surfactant did not exist in the system, the size distribution of microcapsules prepared was much uneven. By adding a surfactant, this phenomenon was disappeared. And the size of microcapsule was also effeced by the hydrophobicity of core material(disperse dye). It was considered due to the difference of dispersity of core materials. And the size of microcapsule prepared was inversely proportional to the stirring speed.